Genelec 8020CWM Manual

Genelec Højttaler 8020CWM

Læs gratis den danske manual til Genelec 8020CWM (32 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 69 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 35 anmeldelser. Har du et spørgsmål om Genelec 8020CWM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

8020C

Operating Manual 2-7

Betriebsanleitung 8-13

Manuel d’utilisation 14-19

Käyttöohje 20-25

Bruksanvisning 26-31

2 English

General description

The bi-ampliﬁed GENELEC 8020C is a compact

two way active monitoring loudspeaker designed

for near ﬁeld monitoring, mobile vans, broadcast

and TV control rooms, surround sound systems,

home studios, multimedia applications and also for

use with computer soundcards. As an active loud-

speaker, it contains drivers, power ampliﬁers, active

crossover ﬁlters and protection circuitry.

The MDE™ (Minimum Diffraction Enclosure™)

loudspeaker enclosure is made of die-cast alumin-

ium and shaped to reduce edge diffraction. Com-

bined with the advanced Directivity Control Wave-

guideTM (DCWTM), this design provides excellent fre-

quency balance in difﬁcult acoustic environments. If

necessary, the bass response of the 8020C can be

extended with a Genelec subwoofer.

Positioning the loudspeaker

Each 8020C is supplied with an integrated ampli-

ﬁer unit, mains cable and an operating manual. After

unpacking, place the loudspeaker in its required lis-

tening position, taking note of the line of the acoustic

axis. The axes of all loudspeakers should converge

at ear height at the listening position (see Figure 1).

Connections

Before connecting up, ensure that the loudspeakers

and the signal source have been switched off. The

power switch of the 8020C is located on the back

panel (see Figure 3). Connect the loudspeaker to an

earthed mains connection with the supplied mains ca-

ble. Never connect the loudspeaker to an unearthed

mains supply or using an unearthed mains cable. Au-

dio input is via a 10 kOhm balanced female XLR

connector. An unbalanced source may be used as

long as pin 3 is grounded to pin 1 at the unbalanced

source connector (see Figure 2). Never connect the

8020C to the loudspeaker outputs of a power ampli-

ﬁer or an integrated ampliﬁer or receiver.

Once the connections have been made, the

loudspeakers are ready to be switched on.

ISSTM autostart function

When the power switch on the back panel of the

loudspeaker is set to “ON”, the Intelligent Signal

SensingTM (ISSTM) autostart function of the 8020C is

active. Automatic powering down to standby mode

happens after a certain time when playback has

ended. The power consumption in standby mode is

typically less than 0.5 watts. The playback will auto-

matically resume once an input signal is detected

from the source.

There is a slight delay in the automatic power-

ing up. If this is undesirable, the ISS

TM function can

be disabled by setting the “ISS DISABLE” switch

on the back panel to “ON” position. In this mode,

the monitor is powered on and off using the power

switch on the back panel.

Volume control

The input sensitivity of the 8020C can be matched

to the output of the signal source by adjusting the

volume control on the front panel.

8020C Active Monitoring System Operating Manual

Produkt Specifikationer

Mærke:	Genelec
Kategori:	Højttaler
Model:	8020CWM
Bredde:	151 mm
Dybde:	142 mm
Højde:	242 mm
Vægt:	3700 g
Produktfarve:	Hvid
Udgangseffekt (RMS):	40 W
Anbefalet brug:	Studio
Frekvensområde:	59 - 25000 Hz
Forbindelsesteknologi:	Ledningsført
Højttaler, type:	2-vejs
Lyd-output kanaler:	1.0 kanaler
Højttaler, placering:	Floor, Tabletop/bookshelf
Antal drivere:	2
Diskanthøjttaler:	Ja
Sensitivitet:	96 dB
Delefrekvens:	3000 Hz
Diskant diameter:	0.75 "
Bashøjttaler:	Ja
Woofer diameter:	101.6 mm
Forstærker:	Indbygget
Woofer diameter (britisk mål):	4 "
XLR indgang:	Ja