Genelec AIW26B Operating Manual
Figure 1. Symmetrical L-C-R
loudspeaker placement
Introduction
The Genelec AIW26B Active In-wall
loudspeaker system consists of a bass
reflex type two-way loudspeaker and a
matched remote amplier module, RAM1.
It The AIW26B can be used in the most
demanding applications, like the main
L-C-R array of a Home Theater system,
critical Stereo listening or rear/side
channels of a large, state-of-the-art Home
Theater.
Unpacking
A Genelec AIW26B set includes the items
listed below. Check that nothing is missing
or damaged during transport and delivery. If
there is a problem with the product, contact
your local Genelec dealer.
• AIW26B loudspeaker unit.
• Grille
•
AIW26B cardboard cut-out template
• RAM1 amplier unit
• Mains power cable
•
Plexiglass cover for the control
switches
• This Operating Manual
Installation
Genelec recommends that you use the
services of an authorized installation
speci alist or oth e r co m petent and
experienced installation company for the
installation of the AIW26B system. Ask your
local Genelec dealer for recommended
installation companies in your region.
Matching loudspeakers
and amplifiers
Each AIW26B loudspeaker unit has been
factory calibrated for optimum performance
with the RAM1 amplifier it is shipped
with. Never mix these matched amplifier-
loudspeaker systems in the installation
process. The matching units are marked with
the same ID number on the reex port of the
AIW26B enclosure and the top panel of the
RAM1
.
Loudspeaker placement
Genelec AIW26B loudspeakers are
equipped with Genelec’s proprietary
Directivity Control Waveguide (DCW). One
of the main characteristics of the DCW
technology is that the loudspeakers give
a very even and consistent frequency
response over a larger listening area than
conventional loudspeakers. A secondary
function of the DCW is to reduce the o-axis
radiated sound energy, thereby minimizing
the reections from the side walls, oor and
ceiling. This results in a precise and stable
sound image
If the AIW26B loudspeakers are used in an
application where their capability for precise
sound imaging is needed, such as the front
channels of a Surround Sound system or
a Stereo system, we recommend that the
loudspeakers are placed as far as possible
from wall corners and other reflective
