Genelec W371A Manual


Læs gratis den danske manual til Genelec W371A (12 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 70 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 35.5 anmeldelser. Har du et spørgsmål om Genelec W371A, eller vil du spørge andre brugere om produktet?

Side 1/12
W371A
SAM Woofer System
Operating Manual
2
Introduction
Thank you for choosing Genelec! Fulfilling dreams by offering
people the most truthful sound reproduction possible has been
the source of our enthusiasm since 1978. There s already over
one million Genelec monitors around the world - welcome to
our story!
Genelec monitors are designed to last. They are hand-built
in Iisalmi, Finland, using certified sustainable methods. They
are individually tested and calibrated and have long support for
spare parts. They are designed for low power consumption, in
use and during automatic standby.
Please register your monitor at
http://www.community. genelec.com/.
By registering you receive an extended three-year warranty
for spare parts in addition of the standard two-year warranty for
parts and labour. For more information about our service and
technical support, please visit
http://www.genelec.com/customer-service.
System Characteristics
The Genelec W371A is an advanced low frequency loudspeaker
system with novel signal processing enabling variable acoustic
radiation of low-frequency audio.
The W371A is suitable for professional monitoring
applications calling for very high acoustic precision and
reliability. They combine with The Ones monitors, offering many
remarkable Genelec technologies to provide point source audio
benefits with directivity control over an extraordinarily wide
audio bandwidth.
The W371A offers steerable acoustic directivity at low
frequencies, enabling the user to select the low frequency
directivity characteristics optimal for the combination of his/her
listening room characteristics, and loudspeaker and listening
locations. The W371A is unique in that it enables a flat and
neutral frequency response at low frequencies in acoustically
challenging rooms when placed at locations typically resulting
in significant acoustic notching (cancellations) at certain
frequencies.
The W371A is not a simple traditional subwoofer. It is an
adaptive low frequency loudspeaker system, offering much
wider operating frequency range and much better envelopment
than subwoofers. Using the W371A can preserve stereo imaging
at the low frequencies.
The W371A is intended to be placed under or very near the
main monitor it is combined with. Frequently, W371A is used in
a free-standing position where the loudspeaker and the W371A
are placed at some distance from acoustically hard walls.
The W371A is comprised of two woofer units. The top woofer
unit is a closed box woofer system and the bottom unit is a bass
reflex ported woofer system. Each unit is driven by its dedicated
400 W amplifier and controlled by a digital signal processing
unit. For more details, see the functional block diagram in this
document.
The benefits of the W371A are fully realized after performing
an acoustic calibration with the monitor paired with it. This
calibration is provided using Genelecs GLM software.
One W371A is used with one main monitor.
Using the Genelec GLM loudspeaker management software,
W371A output is matched with the monitor by taking acoustic
measurements at the listening location. After this, the W371A
becomes an integral extension of the monitor, expanding the
frequency range coverage and increasing the maximum SPL
and dynamic capacity of the monitor. W371A works with
Genelec 8341A, 8351B and 8361A coaxial “The Ones” three-
way monitors, allowing ideal point-source monitoring also
at large listening distances, outside the traditional nearfield
monitoring range.
Packing Content
Each W371A is supplied with a GLM User Kit, one mains power
cable, one 5-meter GLM network cable and this operating
manual.
Operational Modes
The W371A can radiate low frequencies in several different
ways. The most suitable mode depends on application, room
and requirements for the size of the sweet spot.
The user can select and run the setup of W371A in all the
modes and audition to determine the preferred mode for his
situation.
To indicate the quality of the final alignment, GLM software
displays a flatness score and a correlation score after the
calibration. These scores can be used to gauge the best
choice for the operational mode given the system placement
in the room. However, subjective evaluation by listening to the
calibrated system is highly recommended in order to evaluate
the final setup choices.
The operating modes are:
Complementary mode where the two woofers operate
independently to implement a flat frequency response; this is
the default operating mode.
Figure 1. The W371A construction with a 8351B monitor
Closed box
woofer system
Reflex box
woofer system


Produkt Specifikationer

Mærke: Genelec
Kategori: Højttaler
Model: W371A

Har du brug for hjælp?

Hvis du har brug for hjælp til Genelec W371A stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Genelec Manualer

Genelec

Genelec 8381A Manual

15 November 2024
Genelec

Genelec 8010 APM Manual

30 September 2024
Genelec

Genelec 8020D Manual

27 September 2024
Genelec

Genelec 8020B Manual

9 September 2024
Genelec

Genelec 3440A Manual

5 September 2024
Genelec

Genelec 8010 AW Manual

10 August 2024
Genelec

Genelec 8040A Manual

9 August 2024
Genelec

Genelec 8050B Manual

8 August 2024
Genelec

Genelec 8050A Manual

4 August 2024
Genelec

Genelec 8320AWM Manual

4 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer