Generac 7224 Manual
Læs gratis den danske manual til Generac 7224 (44 sider) i kategorien Generator. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Generac 7224, eller vil du spørge andre brugere om produktet?
Side 1/44
Owner’s Manual
60 Hz Air-Cooled Generators
10 kW to 24 kW
SAVE THIS MANUAL FOR FUTURE REFERENCE
®
Para español, visita: http://www.generac.com/service-support/product-support-lookup
Pour le français, visiter : http://www.generac.com/service-support/product-support-lookup
Register your Generac product at:
WWW.GENERAC.COM
1-888-GENERAC
(888-436-3722)
(000209b)
WARNING
Loss of life. This product is not intended to
be used in a critical life support application.
Failure to adhere to this warning could result
in death or serious injury.
ii Owner’s Manual for 60 Hz Air-Cooled Generators
Use this page to record important information about this generator.
Record the information found on the unit data label on this
page. See for the location of the unitGeneral Information
data label. The unit has a label plate affixed to the inside par-
tition, to the left of the control panel console as shown in Fig-
ure 2-1 Figure 2-2, , or . See Figure 2-3 Operation for
directions on how to open the top lid and remove the front
panel.
Always supply the complete model and serial numbers of the
unit when contacting an Independent Authorized Service
Dealer (IASD) about parts and service.
Operation and Maintenance: Correct maintenance and
care of the unit ensures a minimum number of problems, and
keeps operating expenses at a minimum. It is the operator’s
responsibility to perform all safety inspections, to verify all
maintenance for safe operation is performed promptly, and
to have the equipment inspected periodically by an IASD.
Normal maintenance, service, and replacement of parts are
the responsibility of the owner/operator and are not consid-
ered defects in materials or workmanship within the terms of
the warranty. Individual operating habits and usage may con-
tribute to the need for additional maintenance or service.
When the generator requires servicing or repairs, Generac
recommends contacting an IASD for assistance. Authorized
service technicians are factory-trained and are capable of
handling all service needs. To locate the nearest IASD,
please visit the dealer locator at:
www.generac.com/Dealer-Locator.
Model:
Serial:
Production Date:
Volts:
LPV Amps:
NG Amps:
Hz:
Phase:
Controller P/N:
STA MAC ID:
SSID:
(000393a)
WARNING
CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov.
Safety Information
Owner’s Manual for 60 Hz Air-Cooled Generators 1
Section 1: Safety Information
Introduction
Thank you for purchasing this compact, high perfor-
mance, air-cooled, engine-driven generator. It is
designed to automatically supply electrical power to oper-
ate critical loads during a utility power failure.
This unit is factory installed in an all-weather, metal
enclosure intended exclusively for outdoor installation.
This generator will operate using either vapor withdrawn
liquid propane (LP) or natural gas (NG).
NOTE: This generator is suitable for supplying typical
residential loads such as induction motors (sump pumps,
refrigerators, air conditioners, furnaces, etc.), electronic
components (computer, monitor, TV, etc.), lighting loads,
and microwaves, when sized correctly. This unit is
equipped with a Wi-Fi® module, which allows the genera-
tor owner to monitor generator status from anywhere
they have Internet access.
NOTE: Wi-Fi® is a registered trademark of Wi-Fi Alli-
ance®.
The information in this manual is accurate based on
products produced at the time of publication. The manu-
facturer reserves the right to make technical updates,
corrections, and product revisions at any time without
notice.
Read This Manual Thoroughly
If any section of this manual is not understood, contact
the nearest Independent Authorized Service Dealer
(IASD) or Generac Customer Service at 1-888-436-3722
(1-888-GENERAC), or visit www.generac.com for start-
ing, operating, and servicing procedures. The owner is
responsible for correct maintenance and safe use of the
unit.
This manual must be used in conjunction with all other
supporting product documentation supplied with the
product.
SAVE THESE INSTRUCTIONS for future reference. This
manual contains important instructions that must be fol-
lowed during placement, operation, and maintenance of
the unit and its components. Always supply this manual
to any individual that will use this unit, and instruct them
on how to correctly start, operate, and stop the unit in
case of emergency.
Safety Rules
The manufacturer cannot anticipate every possible cir-
cumstance that might involve a hazard. The alerts in this
manual, and on tags and decals affixed to the unit, are
not all inclusive. If using a procedure, work method, or
operating technique that the manufacturer does not spe-
cifically recommend, verify that it is safe for others and
does not render the equipment unsafe.
Throughout this publication, and on tags and decals
affixed to the unit, DANGER, WARNING, CAUTION, and
NOTE blocks are used to alert personnel to special
instructions about a particular operation that may be haz-
ardous if performed incorrectly or carelessly. Observe
them carefully. Alert definitions are as follows:
NOTE: Notes contain additional information important to
a procedure and will be found within the regular text of
this manual.
These safety alerts cannot eliminate the hazards that
they indicate. Common sense and strict compliance with
the special instructions while performing the action or
service are essential to preventing accidents.
How to Obtain Service
When the unit requires servicing or repairs, contact Gen-
erac Customer Service at 1-888-GENERAC (1-888-436-
3722) or visit www.generac.com for assistance.
When contacting Generac Customer Service about parts
and service, always supply the complete model and
serial number of the unit as given on its data decal
located on the unit. Record the model and serial numbers
in the spaces provided on the front cover of this manual.
(000100a)
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
WARNING
(000001)
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
(000002)
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
(000003)
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Produkt Specifikationer
| Mærke: | Generac |
| Kategori: | Generator |
| Model: | 7224 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Generac 7224 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Generator Generac Manualer
18 Juli 2025
11 Juli 2025
8 Juli 2025
7 Juli 2025
7 Juli 2025
26 Juni 2025
19 Februar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
Generator Manualer
- Tektronix
- Powerplus
- CrossTools
- EizenKraft
- Harvia
- Duro Pro
- Solaaron
- Dedra
- Güde
- Kraftech
- Graphite
- Honda
- Trotec
- Rowenta
- SRS
Nyeste Generator Manualer
21 Juli 2025
16 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025
11 Juli 2025
11 Juli 2025
10 Juli 2025
9 Juli 2025
9 Juli 2025