Generac QT13068KVSCR Manual

Generac Ikke kategoriseret QT13068KVSCR

Læs nedenfor 📖 manual på dansk for Generac QT13068KVSCR (96 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/96

Cover198 Rev. C 07/12 Part No. 0J0216



INTRODUCTION

Thank you for purchasing this model of the stationary emergency

generator product line.

Every effort was expended to make sure that the information and

instructions in this manual were both accurate and current at the

time the manual was written. However, the manufacturer reserves

the right to change, alter or otherwise improve this product(s) at

any time without prior notice.

READ THIS MANUAL THOROUGHLY

If any portion of this manual is not understood, contact the nearest

Service Dealer for starting, operating and servicing procedures.

Throughout this publication, and on tags and decals affixed to the

generator, DANGER, WARNING, CAUTION and NOTE blocks are

used to alert personnel to special instructions about a particular

service or operation that may be hazardous if performed incor-

rectly or carelessly. Observe them carefully. Their definitions are

as follows:

INDICATES A HAZARDOUS SITUATION OR ACTION WHICH, IF

NOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS INJURY.

Indicates a hazardous situation or action which, if not

avoided, could result in death or serious injury.

Indicates a hazardous situation or action which, if not

avoided, could result in minor or moderate injury.

NOTE:

Notes contain additional information important to a procedure

and will be found within the regular text body of this manual.

These safety warnings cannot eliminate the hazards that they

indicate. Common sense and strict compliance with the special

instructions while performing the service are essential to prevent-

ing accidents.

Four commonly used safety symbols accompany the DANGER,

WARNING and CAUTION blocks. The type of information each

indicates is as follows:

n This symbol points out important safety information that,

if not followed, could endanger personal safety and/or

property of others.



This symbol points out potential explosion hazard.

This symbol points out potential fire hazard.

This symbol points out potential electrical shock hazard.

The operator is responsible for proper and safe use of the equip-

ment. The manufacturer strongly recommends that the operator

read this Owner's Manual and thoroughly understand all instruc-

tions before using this equipment. The manufacturer also strongly

recommends instructing other users to properly start and operate

the unit. This prepares them if they need to operate the equipment

in an emergency.

For safety reasons, the manufacturer recommends that this

equipment be installed, serviced and repaired by a Service

Dealer or other competent, qualified electrician or installation

technician who is familiar with applicable codes, standards and

regulations. The operator also must comply with all such codes,

standards and regulations.

OPERATION AND MAINTENANCE

It is the operator's responsibility to perform all safety checks, to

make sure that all maintenance for safe operation is performed

promptly, and to have the equipment checked periodically by a

Service Dealer. Normal maintenance service and replacement of

parts are the responsibility of the owner/operator and, as such,

are not considered defects in materials or workmanship within the

terms of the warranty. Individual operating habits and usage con-

tribute to the need for maintenance service.

Proper maintenance and care of the generator ensure a minimum

number of problems and keep operating expenses at a minimum.

See a Service Dealer for service aids and accessories.

Operating instructions presented in this manual assume that the

generator electric system has been installed by a Service Dealer or

other competent, qualified contractor. Installation of this equipment

is not a “do-it-yourself” project.

HOW TO OBTAIN SERVICE

When the generator requires servicing or repairs, simply contact

a Service Dealer for assistance. Service technicians are factory-

trained and are capable of handling all service needs.

When contacting a dealer about parts and service, always supply

the complete Model Number, Serial Number and Type Code (where

applicable) from the DATA LABEL that is affixed to the unit.

1-1

Safety004 Rev. F 05/10

Safety Instructions

n SAVE THESE INSTRUCTIONS – The manufacturer suggests that these rules for safe operation be copied and posted in potential

hazard areas. Safety should be stressed to all operators, potential operators, and service and repair technicians for this

equipment.

If personnel must stand on metal or concrete while installing, •

operating, servicing, adjusting or repairing this equipment,

place insulative mats over a dry wooden platform. Work on the

equipment only while standing on such insulative mats.

The National Electrical Code (NEC) requires the frame and •

external electrically conductive parts of the generator to be con-

nected to an approved earth ground. This grounding will help

prevent dangerous electrical shock that might be caused by a

ground fault condition in the generator or by static electricity.

Never disconnect the ground wire.

Wire gauge sizes of electrical wiring, cables and cord sets must •

be adequate to handle the maximum electrical current (ampac-

ity) to which they will be subjected.

Before installing or servicing this (and related) equipment, make •

sure that all power voltage supplies are positively turned off at

their source. Failure to do so will result in hazardous and pos-

sibly fatal electrical shock.

Connecting this unit to an electrical system normally supplied •

by an electric utility shall be by means of a transfer switch so as

to isolate the generator electric system from the electric utility

distribution system when the generator is operating. Failure to

isolate the two electric system power sources from each other

by such means will result in damage to the generator and may

also result in injury or death to utility power workers due to

backfeed of electrical energy.

Stationary emergency generators installed with an automatic •

transfer switch will crank and start automatically when normal

(utility) source voltage is removed or is below an acceptable

preset level. To prevent such automatic start-up and possible

injury to personnel, disable the generator’s automatic start cir-

cuit (battery cables, etc.) before working on or around the unit.

Then, place a “Do Not Operate” tag on the generator control

panel and on the transfer switch.

In case of accident caused by electric shock, immediately •

shut down the source of electrical power. If this is not pos-

sible, attempt to free the victim from the live conductor. AVOID

DIRECT CONTACT WITH THE VICTIM. Use a nonconducting

implement, such as a dry rope or board, to free the victim from

the live conductor. If the victim is unconscious, apply first aid

and get immediate medical help.

Never wear jewelry when working on this equipment. Jewelry •

can conduct electricity resulting in electric shock, or may get

caught in moving components causing injury.

FIRE HAZARDS

Keep a fire extinguisher near the generator at all times. Do NOT •

use any carbon tetra-chloride type extinguisher. Its fumes are

toxic, and the liquid can deteriorate wiring insulation. Keep the

extinguisher properly charged and be familiar with its use. If

there are any questions pertaining to fire extinguishers, consult

the local fire department.

EXPLOSION HAZARDS

Properly ventilate any room or building housing the generator to •

prevent build-up of explosive gas.

Do not smoke around the generator. Wipe up any fuel or oil •

spills immediately. Ensure that no combustible materials are left

in the generator compartment, or on or near the generator, as

FIRE or EXPLOSION may result. Keep the area surrounding the

generator clean and free from debris.

These generators may operate using one of several types •

of fuels. All fuel types are potentially FLAMMABLE and/or

EXPLOSIVE and should be handled with care. Comply with all

laws regulating the storage and handling of fuels. Inspect the

unit’s fuel system frequently and correct any leaks immediately.

Fuel supply lines must be properly installed, purged and leak

tested according to applicable fuel-gas codes before placing

this equipment into service.

Diesel fuels are highly FLAMMABLE. Gaseous fluids such •

as natural gas and liquid propane (LP) gas are extremely

EXPLOSIVE. Natural gas is lighter than air, and LP gas is heavier

than air; install leak detectors accordingly.

1-3

Safety004 Rev. F 05/10

Engine exhaust and some of its constituents are known

to the State of California to cause cancer, birth defects

and other reproductive harm.

This product contains or emits chemicals known to the

State of California to cause cancer, birth defects and

other reproductive harm.

IDENTIFICATION RECORD

2-1

General Information



Any attempt to crank or start the engine before

it has been properly serviced with the recom-

mended oil may result in an engine failure.

NOTE:

For temperatures below 32° F, it is strongly recommended to

use the optional Cold Weather Start Kit. The oil grade for tem-

peratures below 32° F is 5W-30 synthetic oil.



Do not use any chromate base rust inhibitor

with ethylene glycol base anti-freeze or chro-

mium hydroxide (“green slime”) forms and will

cause overheating. Engines that have been

operated with a chromate base rust inhibitor

must be chemically cleaned before adding eth-

ylene glycol base anti-freeze. Using any high

silicate anti-freeze boosters or additives will

also cause overheating. The manufacturer also

recommends that any soluble oil inhibitor is

NOT used for this equipment.



Do not remove the radiator pressure cap while

the engine is hot or serious burns from boiling

liquid or steam could result.



Ethylene glycol base antifreeze is poisonous.

Do not use mouth to siphon coolant from the

radiator, recovery bottle or any container. Wash

hands thoroughly after handling. Never store

used antifreeze in an open container because

animals are attracted to the smell and taste of

antifreeze even though it is poisonous to them.

3-1

Equip010 Rev. D 07/11

NOTE:

The fuel consumption requirements are identified in the

Specifications section of the Owner's Manual. Refer to the

Installation Manual if assistance is required for the sizing of

the pipe diameter for the generator. Any piping used to connect

the generator to the fuel supply should be of adequate size to

achieve the 100% load fuel consumption requirements identi-

fied in the Specifications section regardless of actual load.

NOTE:

The recommended fuel pressure is identified in the Specifications

section this manual.

NOTE:

It is the responsibility of the installer to make sure that only

the correct recommended fuel is supplied to the generator fuel

system. Thereafter, the owner/operator must make certain that

only the proper fuel is supplied.

5-1

Engine Parameters

Exhaust System

Combustion Air Requirements (Natural Gas)

6-1

Governor

Engine Lubrication System

Fuel Consumption - ft 3/hr (Natural Gas/LPV) @ 11 in

H20/68 °F

Voltage Regulator

Power Adjustment for Ambient Conditions

Controller Nexus ...................................................................

6-2

ALTERNATOR AC LEAD

CONNECTIONS

ALTERNATOR POWER WINDING

CONNECTIONS

E3 L - N

L - L

INTERNAL

CONNECTIONS

00 (NEUTRAL)

S12

S11

S10

E3 L - N

L - L

7-1

General Information

E3 E2

00 (NEUTRAL)

INTERNAL CONNECTIONS E1

L-L

L-N

S1 S1

S4 S4

S5 S2

E3 E2

L-L

L-N

S7 S1

S10 S4

S12

S11 S2

E3 L - N

L - L

INTERNAL

CONNECTIONS

00 (NEUTRAL)

0VAC

2VAC

208C

240C

240 VAC

120 VAC 120 VAC

240 VAC

S2 S12

S11

S10

E1 E3

208 VAC

7-2

General Information

CONTROL PANEL INTERFACE

 With the switch set to AUTO, the engine may

crank and start at any time without warning.

Such automatic starting occurs when utility

power source voltage drops below a preset

level or during the normal exercise cycle. To

prevent possible injury that might be caused

by such sudden starts, always set the switch

to OFF and remove the fuse before work-

ing on or around the generator or transfer

switch. Then, place a “DO NOT OPERATE”

tag on the generator panel and on the trans-

fer switch.

ACTIVATE THE GENERATOR

NOTE:

The generator will only run in manual until the passcode has

been entered.

NOTE:

DAMAGE CAUSED BY MISWIRING OF THE INTERCONNEC

WIRES IS NOT WARRANTABLE!

DISPLAY INTERFACE MENUS

8-1

Control Panel

8-2

Produkt Specifikationer

Mærke:	Generac
Kategori:	Ikke kategoriseret
Model:	QT13068KVSCR

Har du brug for hjælp?

Hvis du har brug for hjælp til Generac QT13068KVSCR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Generac Manualer

Generac RG04854KNAX Manual

11 Januar 2025

Generac RG04854ANAC Manual

11 Januar 2025

Generac 6852 Manual

6 September 2024

Generac CW20 Manual

6 September 2024

Generac XC3000P Manual

6 September 2024

Generac RG03624KNSX Manual

18 August 2024

Generac QT04554JNNNA Manual

17 August 2024

Generac QT10068AVAYA Manual

17 August 2024

Generac QT03542ANANR Manual

16 August 2024

Generac QT07068GNAX Manual

16 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Waterpik WP-490 Manual

10 April 2025

Daikin EAVX16S18DA9WG Manual

10 April 2025

Daikin RXYLQ40T7Y1B Manual

10 April 2025

Daikin RXYLQ42T7Y1B Manual

10 April 2025

Daikin ETVZ16S23EA6V7 Manual

10 April 2025

Daikin FXMA200AXVMB Manual

10 April 2025

Daikin FXZQ15A2VEB Manual

10 April 2025

Daikin ETVZ16S18EA9W Manual

9 April 2025

Daikin DSR1 Manual

9 April 2025

Simplified MFG SP18CAT120 Manual

9 April 2025