Gerni Pro 160.2 Manual

Gerni Højtryksrenser Pro 160.2

Læs gratis den danske manual til Gerni Pro 160.2 (16 sider) i kategorien Højtryksrenser. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Gerni Pro 160.2, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
(07.2018)
PRO 160.2
User Guide
2
The instruction consists of 4 parts. Part 1:3 Safety
Instructions. Part 2:3 User Guide. Part 3:3 Trouble-
shooting, Technical Data and Disposal. Part Warranty
Conditions.
Part 1:3 - Safety Instructions
Before rst use of the machine, read the instruc-
tions carefully. Save instructions for later use.
Safety instructions marked with this symbol
must be observed to prevent personal injury
or serious damage to property.
WARNING
This machine has been designed for use with
cleaning agents supplied or recommended by Ger-
ni. The use of other cleaning agents or chemicals
may adversely aect the safety of the machine.
High pressure jets can be dangerous if
subject to misuse. The jet must not be direct-
ed at persons, live electrical equipment or
the machine itself.
Do not use the machine within range of persons
unless they wear protective clothes.
Do not direct the jet against yourself or others in
order to clean footwear.
Risk of explosion – Do not spray ammable liq-
uids. High pressure washers shall not be used
by children or untrained personnel.
High pressure hoses, ttings and couplings are
important for the safety of the machine. Use only
hoses, ttings and couplings recommended by Ger-
ni.
To ensure machine safety, use only original spare
parts recommended by Gerni.
Water that has own through back-ow preven-
ters is considered to be non-potable.
Don’t use the machine if a supply cord or impor-
tant parts of the machine are damaged, e.g. safety
devices, high pressure hoses, trigger gun.
Inadequate extension cords can be dange rous.
If an extension cord is used, it shall be suitable for
outdoor use, and the connection has to be kept dry
and o the ground. It is recommended that this is
accomplished by a cord reel which keeps the sock-
et at least 60 mm above the ground.
Switch o and unplug the machine when leaving
it unattended, when nished using it or when con-
verting it to another function, when doing repair and
maintenance.
During use of high pressure washers, aerosols
may be formed. Inhalation of aerosols can be haz-
ardous to health, for the protection against aerosols
a respiratory mask of class FFP 2 or equivalent may
be needed, depending on the cleaning environment.
Intended Use and Terms of Liability
•
The PRO-series have been developed for do-
mestic cleaning pur poses only and for use in an
upright position. Any other use is considered as
improper use.
•
A high pressure washer operates with dierent
levels of pressure and cleaning detergents for
various cleaning tasks and results. Always follow
instructions on detergents for use, emergency
and disposal.
• Do not operate the machine at temperatures be-
low 0°C. Never start a frozen machine, never use
it indoor and never cover it during use. This is
considered improper and wrongful use. Use of
wrongful pressure, detergent and/or applications
may cause damage to machine, surfaces, material
and devices.
All of the above is considered improper and wrong-
ful use. Gerni accepts no liability for any damage
resulting from any improper or wrongful use.
Safety devices and their functioning
The machine automa tically stops when releasing
the trigger. The machine will start again when re-
activating the trigger. The spray handle features a
locking device. When activated, the spray handle
cannot be operated.
The machine has an automatic self-resetting thermal
protector. If the machine is overheated, the thermal
protector will cut the power supply. In this case, wait
for the machine to cool down. An integrated hydrau-
lic safety valve protects the system from excessive
pressure.
Precautions
The electric supply connection shall be made by a
qualied electrician and comply with IEC 60364-1.
It is recommended that the electric supply to this
machine should include either a residual current
device that will interrupt the supply if the leakage
current to earth exceeds 30 mA for 30 ms or a device
that will prove earth circuit.
• Use motor start/delayed fuses with characteristic
D according to IEC 947-2 or corresponding stand-
ards outside IEC.

Produkt Specifikationer

Mærke: Gerni
Kategori: Højtryksrenser
Model: Pro 160.2

Har du brug for hjælp?

Hvis du har brug for hjælp til Gerni Pro 160.2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højtryksrenser Gerni Manualer

Gerni

Gerni Super 130.3 Manual

30 August 2024
Gerni

Gerni Super 140.3 Manual

30 August 2024
Gerni

Gerni Classic 100.5 Manual

30 August 2024
Gerni

Gerni Classic 130.3 Manual

30 August 2024
Gerni

Gerni 3300 Manual

30 August 2024
Gerni

Gerni Super 160.3 Manual

30 August 2024
Gerni

Gerni Super 150.3 Manual

30 August 2024
Gerni

Gerni 7000 Manual

30 August 2024
Gerni

Gerni Classic 110.5 Manual

30 August 2024
Gerni

Gerni 4000 Manual

30 August 2024

Højtryksrenser Manualer

Nyeste Højtryksrenser Manualer

Kärcher

Kärcher K 3 HR Car & Deck Manual

13 August 2025
Lavor

Lavor LANDER 3000 Manual

12 August 2025
Makita

Makita HW001G Manual

11 August 2025
Sun Joe

Sun Joe BDL-A0214 Manual

10 August 2025
Stihl

Stihl RE 462 Manual

9 August 2025
Westinghouse

Westinghouse WPX3400e Manual

7 August 2025
Westinghouse

Westinghouse WPX2300e Manual

7 August 2025
Powerplus

Powerplus POWXG90408 Manual

7 August 2025
Westinghouse

Westinghouse WPX2700e Manual

7 August 2025
Westinghouse

Westinghouse WPX3200e Manual

6 August 2025