Gorenje GV51214 Manual


Læs gratis den danske manual til Gorenje GV51214 (29 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Gorenje GV51214, eller vil du spørge andre brugere om produktet?

Side 1/29
GV 12145
With each wash cycle.
Compartment
For programmes with pre-wash only.
(Follow the user instructions!)
Electric indicator on control panel (if provided).
Check the rinse aid level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt level
Load the baskets
Select a programme
T urn on the water tap ,close the door . The machine will start working after about 10 seconds.Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better.Unload the appliance, starting from the lower basket.
Changing the programme
Add forgotten dishes in the
dishwasher.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Press the Programme Button until the selected programme lights up.
( See the section entitled Operation instruction )Ā ā
When the working cycle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.
If the appliance is switched
off during a wash cycle.
Open the doo r carefully.
Hot steam may esc ape
when the doo r is open ed!
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
Switch on the appliance Open the door,press the On/Off button to switch on the appliance .
1.Open the door a little to stop the dishwasher.
2.After the spray arms stop working, you can open the door completely.
3.Add the forgotten dishes.
4.Close the door, the dishwasher will start running again after 10 seconds.
For detailed operating method read the corresponding content on the instruction manual.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2. Press the for more than 3 seconds to cancel the running programme.
3. Select a new programme.
4. Restart the dishwasher.
Programme Button


Produkt Specifikationer

Mærke: Gorenje
Kategori: Opvaskemaskine
Model: GV51214
Vekselstrømsindgangsspænding: 230 V
Bredde: 448 mm
Dybde: 550 mm
Højde: 815 mm
Pakkevægt: 37000 g
Pakkedybde: 635 mm
Pakkebredde: 485 mm
Pakkehøjde: 889 mm
Energieffektivitetsklasse (gammel): A+
Placering af apparat: Fuldt indbygget
Installationsrum bredde: 450 mm
Installationsrum dybde: 570 mm
Installationsrum højde: 820 mm
Støjniveau: 49 dB
Antal vaskeprogrammer: 6
Forsinket start-timer: Ja
Justerbare fødder: Ja
Justering af fødder: 600 mm
Dør farve: Ikke anvendelig
Balje materiale: Rustfrit stål
Vaskeklasse: A
Vandforbrug pr. cyklus: 9 L
Indbygget vandblødgører: Ja
Farve på kontrolpanel: Black, Grey
Antal kuverter: 9 kuverter
Cyklustid: 165 min.
Forsinket start (maks.): 9 t
Opvaskeprogrammer: Eco, Quick
Tørringsklasse: A
Indikator for afspændingsmiddel: Ja
Energiforbrug pr. cyklus: 0.77 kWh
Antal temperaturindstillinger: 4
AquaStop funktion: Ja
Temperatur (maks): 65 °C
Selvrensende filter: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Gorenje GV51214 stil et spørgsmål nedenfor, og andre brugere vil svare dig