Growatt TPM-CT-E-EU Manual

Growatt Ikke kategoriseret TPM-CT-E-EU

Læs gratis den danske manual til Growatt TPM-CT-E-EU (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Growatt TPM-CT-E-EU, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Grid

SDM630MCT V2 is a multi-functi onal din-rail meter de signed for accurate measurement and display of parameters in 3P3W/3P4W power

grid systems, such as voltage, current, power, frequency, active power, reactive power, positive energy, reverse energy, total ha rmonics,

etc. It is an ideal choice for real-time power monitoring, featuring a wide range of functions and applications with high s tability o ver

extended service life. The meter works with an external current transformer and can be appl ied in both hi gh and low voltage power g rid. It

comes with an RS485 communication interface, which suppo rts a maximum baud rate of 38400 bps and enables remote communication.

TPM-CT-E-EU(SDM630MCT V2) Three-phase

Smart Meter Quick Guide

General Specifications

Rated voltage

3×230/400Vac

Rated frequency

50/60Hz

L-N voltage r ange

100 ~ 276Vac

L-L voltage range

173 ~ 480Vac

Auxiliary p ower voltage range

85 ~ 275Vac or 120 ~ 380Vdc

AC withstand voltage

4KV for 1min

Input current range

1A or 5A

Short-term overcurrent

20*IMAX for 0.5s

Max. Reading

9999999.9kWh/kVArh

Accuracy

Active powe r

0.5% of range maximum

Reactive po wer

0.5% of range maximum

Environment

Regulated working temperature

range

- ℃～+ ℃25 55

Limited working temperature range

- ℃～ ℃40 +70

Relative hu midity annual average

≤90％

Installation category

CAT III

Degree of pol lution

RoHS compliant

Communica tion

RS485 output for Modbus RTU

Baud rate

9600bps(default)

Pulse

3200imp/kWh

Mechanics

Outline dimensions

94.5x72x6 5mm(LxWxH )

Din rail dimensions

DIN rail 35mm

Protection level

IP51 (indoor)

Item

Quantity

Description

Three-phase meter

Quick Insta llation Guide

RS485 cable (standard length: 15m)

Current Transformer

11.

Overview

22.

Technical Parameters

33.

Unpacking

Quick

inst

allation

man

ual

A B C D

44.

Dimensions (Unit: mm)

55.

Installation

1. The Growatt Stora ge Inverter and the Hybrid Inverter are hereinafter referred to as "the Storage/Hy brid Inverter".

2. The grid is on the right side and the c urrent flows from P1 to P2 (from the grid to the load).

Note:

Storage/

Hybrid

Inverter Grid

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16 17 18 19 20

LN L NVol ta ge i np ut s

So Cu rr en t inpu ts

RS 48 5

RS485-A

RS485-B

S2 S1S2 S1

3P3W

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16 17 18 19 20

LN L NVol ta ge i np ut s

So Cu rr en t inpu tsRS 48 5

RS485-A

RS485-B

S2 S1 S2 S1 S2 S1

3P4W

P2 P1

35mm

94.5mm

72mm

65mm

P2 P1

Storage/

Hybrid

Inverter

There are fou r touch buttons on the panel, arrange d from top to bottom as foll ows: “ESC(←)V/A”, “↑(Alt)MD/PH/HZ”, “↓(Shift)P”,

“ENTER(→)E”. These buttons can be operat ed in two ways : long press (pressing for more than two seconds) and short press (pressing for

less than one second).

NO.

Button

Features

Viewable content(short press)

Short press:

display voltage and current, ←

Long press: ESC

Phase voltage, Line voltage, Phase current, Neutral 

current, Voltage harmonics, Current harmonics

Short press: display power factor and

frequency, ↑

Long press: Alt

Phase(Total) frequency, Total power factor, Ph ase(Total)

maximum current demand

Short press: display power, ↓

Long press: Shift

Phase(Total) active power, Phase(Total) reacti ve power,

Phase(Total) apparent power

Short press:

display electric energy, →

Long press: Enter

Total active electric energy, Total reactive electric energy,

Positive active electric energy, Reverse active electric

energy, Positive reactive electric energy, Reverse

reactive electric energy

ESC

A. Voltage sampling and po wer supply wiring

3P3W:

Wiring of the L1 voltage sampling line: corresponding to meter Pin 4

Wiring of the L2 voltage sampling line: corresponding to meter Pin 1

Wiring of the L3 voltage sampling line: corresponding to meter Pin 2

3P4W:

Wiring of the L1 voltage sampling line: corresponding to meter Pin 4

Wiring of the L2 voltage sampling line: corresponding to meter Pin 3

Wiring of the L3 voltage sampling line: corresponding to meter Pin 2

Wiring of the N voltage sampling line: correspo nding to mete r Pin 1

B. Current transformer wiring

Please refer to the diagram above. The grid is on the right and the

current flows from K to T (from the grid to the load).

Wiring of the L1 CT: S1 Line correspondin g to meter Pin 16 , S2 Line

corresponding to meter Pin 15

Wiring of the L3 CT: S1 Line correspondin g to meter Pin 20 , S2 Line

corresponding to meter Pin 19

Wiring of the L1 CT: S1 Line correspondin g to meter Pin 16 , S2 Line

corresponding to meter Pin 15

Wiring of the L2 CT: S1 Line correspondin g to meter Pin 18 , S2 Line

corresponding to meter Pin 17

Wiring of the L3 CT: S1 Line correspondin g to meter Pin 20 , S2 Line

corresponding to meter Pin 19

C.RS485 cable wiring

Connect the RS485A to Pin 14 and RS485B to Pin 13 (The network cables delivered with the inverter are labeled as 485-A and 485-B; if

you are using the cables purchased yourself, make sure to differen tiate between 485-A and 485-B.)

D. Connecting the meter to the Growatt Three-phase

Storage/Hybrid Inve rter E. When connecting the smart meter to the inverter, connect one

end of the cable to Termi nal 13 (485B) and Terminal 14 (485A) of

the smart meter and the other end to Pin 6 (485A) and Pin 7 (485B)

of the COM1 port.

Note: In most c ases, the re d cable is used for 485A and the black

cable for 485B.

G. The standard RS485 cable length is 15m. If a longer RS485

cable is required, please use an intact cable and make sure the

RS485 cable is less than 100m (the recommended le ngth is less

than 25m).

F. Dismantle th e 16-pin connector delivered wit h the inverte r and

set aside the water-proof plug. Route the cables through each part

sequentia lly, then connect them to Pin 6 and Pin 7. Finally, connec t

the connector to the COM1 port of the inverter.

66.

Button Description and Display

Red(4 8 5A)- - -COM 1 (6)

Black( 48 5B)-- -COM1 (7)

COM1

COM1 6 7( 、）

Produkt Specifikationer

Mærke:	Growatt
Kategori:	Ikke kategoriseret
Model:	TPM-CT-E-EU

Har du brug for hjælp?

Hvis du har brug for hjælp til Growatt TPM-CT-E-EU stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Growatt Manualer

Growatt MAX 70KTL3 Manual

27 December 2024

Growatt ATS-T Manual

27 December 2024

Growatt SYN 50-XH-30 Manual

17 December 2024

Growatt TPM-CT-E-EU Manual

16 December 2024

Growatt MOD 3-10KTL3-XA Manual

24 September 2024

Growatt SPF6000ES PLUS Manual

24 September 2024

Growatt SPI 3000-22000 Manual

24 September 2024

Growatt MIN 2500-4600TL-XH Manual

14 September 2024

Growatt MID 17-22KTL3-X Manual

11 September 2024

Growatt MAX 100-125K TL3-X BT Manual

11 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet Audio P100CPA Manual

15 Juni 2025

Sabrent BK-MAC2 Manual

15 Juni 2025

Planet Audio P9950CPA Manual

15 Juni 2025

Filmcity FC-CTH-01 Manual

15 Juni 2025

Cleveland 22CGT6 Manual

15 Juni 2025

Auray SVRK-4U-S Manual

15 Juni 2025

Bobrick B-2860 Manual

15 Juni 2025

Sony ODBK-103 Manual

15 Juni 2025

Planet Audio P70CPA Manual

15 Juni 2025

Gourmia GAF657 Manual

15 Juni 2025