Grundig EGNLP 4631 XCW Manual
Grundig
Opvaskemaskine
EGNLP 4631 XCW
Læs nedenfor 📖 manual på dansk for Grundig EGNLP 4631 XCW (46 sider) i kategorien Opvaskemaskine. Denne guide var nyttig for 14 personer og blev bedømt med 4.3 stjerner i gennemsnit af 7.5 brugere
Side 1/46
Dishwasher
User’s Manual
17 4507 0100_AD_GRUNDIG_E8L_EN/ 05-08-22.(10:30)
EGNLP...
The following symbols are used in the user manual and on the packaging:
Danger that may result in death or injury.
NOTICE
Danger that may result in damage to the product or its surroundings.
Important information or useful hints about usage.
Read the user manual.
Dear Customer,
Please read this user manual before using the product.
Thank you for choosing this Grundig product. We hope that you get the best results
from your product which has been manufactured with high quality and state-of-the-art
technology. Therefore, please read this entire user manual and all other accompanying
documents before using the product.
Follow all warnings and information in the user manual. Thus, you can protect yourself
and your product against potential dangers.
Keep the user manual. If you handover the product to someone else, give the user
manual as well.
This product was manufactured using the latest technology in environmentally friendly conditions.
CONTENTS
1 SAFETY INSTRUCTIONS 4
Intended Use 4 .....................................................
Safety for children, vulnerable persons and pets 4
Electrical safety 5 .................................................
Transportation Safety 5 ........................................
Installation Safety 6 ..............................................
Operational safety 7 .............................................
Maintenance and cleaning safety 8 ......................
Interior Lighting 8 ..................................................
2 ENVIRONMENTAL
INSTRUCTIONS 8
Compliance with WEEE Directive and Disposing
of the Waste Product 8 .........................................
Package information 9 ..........................................
Technical specifications 10 ...................................
3 YOUR DISHWASHER 11
Overview...........................................................11
4 INSTALLATION 12
Appropriate installation location....................... 12
Connecting water supply 12 .................................
WaterProtect+ 13 .................................................
Connection to the drain 14 ...................................
Adjusting the feet 14 .............................................
Electrical connection........................................ 14
5 PREPARATION 15
Tips for energy saving 15 .....................................
Water softening system 15 ...................................
Adjusting the water softening system 15 ..............
Adding salt 16 .......................................................
Detergent 16 .........................................................
Tablet detergents 18 .............................................
Rinse aid.......................................................... 18
Items not suitable for washing in the
dishwasher 19 ......................................................
Placing the dishes into the dishwasher 19 ...........
Cutlery basket ................................................. 21
Cutlery basket ................................................. 21
Collapsible lower basket tines 22 .........................
Collapsible lower basket tines 22 .........................
Tray Wash Supports 23 ........................................
SoftTouch Accessory ....................................... 24
Lower Basket Glass Holder 24 .............................
Lower basket multipurpose / height adjustable
service rack 24 .....................................................
Lower basket bottle wire 25 ..................................
Upper basket height adjustable rack 25 ...............
Upper basket multipurpose service rack 26 .........
Upper basket multi-function service rack......... 26
Adjusting the height of the upper basket 27 .........
Adjusting the height of the upper basket 28 .........
Collapsible upper basket wires 29 ........................
Height setting with empty basket 29 .....................
Ceiling cutlery basket 30 ......................................
Ceiling cutlery basket 30 ......................................
6 OPERATING THE PRODUCT 31
Programme Selection / Programme Cancel key 31
Function Keys 31 ..................................................
Preparing the machine 31 ....................................
Programme selection....................................... 31
Additional functions 31 .........................................
Scheduling the washing time 36 ...........................
Starting the programme 36 ...................................
Cancelling the programme 37 ..............................
Salt indicator ( ) 37 ...........................................
Rinse Aid indicator ( ) 37 ..................................
End of programme 37 ...........................................
Adjusting the amount of rinse aid 37 ....................
Water cut-off warning....................................... 38
Overflowing warning 38 ........................................
SelfCare........................................................... 38
7 MAINTENANCE AND
CLEANING 39
Cleaning the outer surface of the product 39 .......
Cleaning the interior of the machine 39 ................
Cleaning the filters 39 ...........................................
Cleaning the hose filter 40 ....................................
Cleaning the impellers 41 .....................................
Lower impeller 41 .................................................
Upper impeller 41 ................................................
8 TROUBLESHOOTING 42
4/EN
Safety Instructions
•This section contains safety
instructions that will help get
protected against risks of
personal injury or property
damage.
•Our company shall not be
responsible for damages
that may arise when these
instructions are not followed.
Installation and repair
procedures must always be
performed by the manufacturer,
authorised service agent or a
qualified person specified by the
importer.
Only use original parts and
accessories.
Do not repair or replace
any part of the product unless
specified expressly in the user
manual.
Do not make any technical
modifications to the product.
Intended Use
This product is designed to
be used in houses and indoor
places. For example:
- Personnel kitchens in
stores, offices and other working
environments;
- Farm houses;
- Areas used by customers
at hotels, motels and other types
of accommodation;
- Bed&breakfast type
hotels, boardinghouses.
This product must be used to
do the domestic type dishes
only.
This product is not suitable for
commercial or collective use.
•The service life of your
product is 10 years. During
this period, original spare
parts will be available to
operate the product properly.
Safety for children,
vulnerable persons and
pets
This product can be used
by children at and above 8
years old and by persons
whose physical, sensory or
mental capabilities were not
fully developed or who lack
experience and knowledge
provided that they are
supervised or trained on the
safe usage of the product and
the risks it brings out.
Children below the age of
3 must be kept away from
the product unless they are
continuously supervised.
Electrical products are
dangerous for children and
pets. Children and pets must
not play with, climb on or
enter inside the product.
Do not forget to close the
door of the product when
leaving the room where it is
located. Children and pets
may remain locked inside the
product and suffocate.
1-
5/EN
Cleaning and user
maintenance works should
not be performed by children
unless they are supervised by
someone.
Keep packaging materials
away from children. There
is the risk of injury and
suffocation.
Store all detergents and
additives used with the
product in a safe place away
from the reach of children.
For children's safety, cut the
power cable and break the
locking mechanism so that it
will be non-functional before
disposing of the product.
Electrical safety
The product must be
unplugged during installation,
maintenance, cleaning,
repairing and moving
procedures.
If the power cable is
damaged, it must be replaced
by a qualified person
specified by the manufacturer,
authorised service agent or
importer in order to avoid
potential dangers.
Do not squeeze the power
cable under or behind the
product. Do not place heavy
objects on the power cable.
Power cable must not be bent
excessively, pinched or come
into contact with any heat
sources.
Do not use extension cords,
multi-sockets or adapters to
operate the product.
Plug must be easily
accessible. If this is not
possible, the electrical
installation where the product
is connected must contain
a device which conforms to
the electrical regulations and
disconnects all poles from the
grid.
Do not touch the power plug
with wet hands.
Remove the plug from the
socket by gripping the plug
and not the cable.
Transportation Safety
Before transporting the
product unplug it and
disconnect its drain and water
supply connections. Drain the
remaining water in the product
completely.
Product is heavy, do not
move it alone.
NOTICE
Do not hold the
product from its door or panel to
move it.
NOTICE
If you need to move
the product, do it in upright
position and hold from the rear
side. Slanting the product to front
may cause the electronic parts in
it to get wet and damaged.
NOTICE
Make sure that
the hoses do not get kinked,
7/EN
hose set. Do not make extension
at the hoses.
NOTICE
Connect the water inlet
hose directly to the water tap.
Pressure coming from the tap
should be 0.03 MPa (0.3 bars)
minimum and 1MPa (10 bars)
maximum. If the water pressure
exceeds 1 MPa (10 Bars), a
pressure relief valve should be
installed in between.
Route the power cable and
hoses in a way that they do
not cause risk of tripping.
Operational safety
•Only dishwasher safe
detergents, rinse aids and
additives must be used.
Never use chemical solvents
in the product. They bring
forth the risk of explosion.
The wash-water inside the
product is not potable.
Dishwasher detergents have
high alkali content and can
be very dangerous when
ingested. Avoid letting them
get into contact with skin and
eyes and keep children away
from the product when its
door is open. Make sure that
the detergent dispenser is
empty after the washing cycle
is complete.
When you pull the upper and
lower baskets out completely,
the door of the product will
bear all the weight of the
baskets. Do not sit or put
other loads on the door;
otherwise, the product may
tilt.
Maximum washing capacity
of the product is stated in the
section called
“Technical
Specifications”
.
To prevent possible injuries,
always place the sharp and
pointed dishes such as
service fork, bread knife,
etc. upside down so as their
pointed ends face down or
they lie horizontally in the dish
basket.
Open the door of the product
carefully if you need to do so
when the product is running.
Be careful against hot steam
that may escape or hot water
that may spill.
Do not start the broken or
damaged product. Unplug
the product (or switch off the
fuse it is connected to), turn
off the water tap and call the
authorised service agent.
Do not place flame sources
(lit candles, cigarettes, etc.)
on or close to the product.
Do not keep combustable/
flammable substances close
to the product.
Do not climb on the product.
•Unplug the product and close
the tap if you are not going to
use it for a long time.
8/EN
Maintenance and cleaning
safety
Do not wash the product by
spreading or pouring water
onto it.
Do not use sharp or abrasive
tools when cleaning the
product. Do not use home
cleaning products, detergent,
gas, gasoline, thinner, alcohol,
varnish etc.
NOTICE
Do not forget to install
the product’s filter back after you
have cleaned it. Otherwise, pumps
will get clogged and product will be
damaged.
Interior Lighting
Depending on the model
of your product, call the
authorised service agent when
it is required to change the
LED/bulb used for lighting.
Environmental
Instructions
Compliance with WEEE
Directive and Disposing of
the Waste Product
This product complies with
EU WEEE Directive (2012/19/
EU). This product bears a
classification symbol for
waste electrical and electronic
equipment (WEEE).
This symbol indicates
that this product shall
not be disposed with
other household wastes
at the end of its service
life. Used device must
be returned to official collection
point for recycling of electrical
and electronic devices. To find
these collection systems please
contact to your local authorities
or retailer where the product was
purchased. Each household
performs important role in
recovering and recycling of old
appliance. Appropriate disposal
of used appliance helps prevent
potential negative consequences
for the environment and human
health.
Compliance with RoHS
Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
2-
9/EN
Package information
Packaging materials of
the product are
manufactured from
recyclable materials in
accordance with our National
Environment Regulations. Do not
dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by
the local authorities.
10/EN
Technical specifications
Maximum washing capacity (check the
energy label and Programme data and
average consumption values table given
on Quick Guide. )
Height (check installation document for
installation)
Width: 60
Depth: 57
Power input: 220-240 V, Hz *50
Total power 1800-2100 W *
Heater power: 1800 W *
Total current: 10 A *
Pump power: 90 - 125 W *
Drain pump power: 30 W *
* For detailed electrical values, check
the type label on the machine door.
Water Pressure 0.3 –10 bar
(= 3 – 100 N/cm² = 0.03-1.0 Mpa)
Technical specifications may be
changed without prior notice to improve
the quality of the product.
Figures in this manual are schematic
and may not match the product exactly.
Values stated on the markings of the
product or in the printed documents
accompanying the product are
obtained in the laboratory on basis of
the relevant standards. These values
may vary according to the usage of the
product and ambient conditions.
Note for test institutions:
Data required for performance tests shall
be provided upon request. Requests can
be e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock
number and serial number of the product
to be tested in your request e-mail along
with your contact information. Code, stock
number and serial number of the product
may be found on the type label attached to
the side wall of the door.
Compliance to standards and test
data/EC declaration of conformity
Development, production and
sales stages of this product comply
with the safety rules included in all
pertaining European Community
regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC
60436 / EN 60436
The model information as stored in
the product database can be reached
by entering following website and
searching your model identifier (*)
found on energy label.
https://eprel.ec.europa.eu/
XXXXXXXXXX (*)
This section applies for products
with Wifi feature.
Frequency Band 2.4Ghz
Max. Conduction Power : < 100mW
CE Declaration of Conformity
Arçelik A.Ş. Declares that this appliance
complies with Instruction 2014/53/EU.
The full text of EU Conformity Declaration
is on the web site:
Products, address
support.grundig.com
11/EN
Your dishwasher
Overview
1. Upper basket
2. Upper impeller
3. Lower impeller
4. Cutlery basket (depends on model)
5. Door
6. Rating Label
7. Control panel
8. Detergent dispenser
9. Lower basket
10. Filters
11. Salt reservoir lid
12. Upper basket rail
13. Upper cutlery basket (depends on model)
14. Tabletop (depends on model)
15. Fan drying system (depends on model)
3-
15
15
12/EN
Installation
Read “Safety Instructions” section first!
Installation procedures must always be
performed by the manufacturer, authorised
service agent or a qualified person
specified by the importer. To make the
product ready for use, make sure that
the electricity, tap water supply and water
drainage systems are appropriate before
calling the authorised service agent. If
they are not, call a qualified technician
and plumber to have the necessary
arrangements carried out.
Preparation of the location and
electrical, tap water and waste water
installations at the place of installation
is under customer's responsibility.
Installation and electrical connections
must be carried out by the authorised
service agent. Manufacturer shall
not be held responsible for damages
arising from processes carried out by
unauthorised persons.
Prior to installation, check if the product
has any defects on it. If the product
is damaged, do not have it installed.
Damaged products cause risks for your
safety.
Make sure that the water inlet and
discharge hoses are not folded,
pinched or crushed while pushing the
product into its place after installation
or cleaning procedures.
The front of the appliance may not be
removed on free-standing or under-the-
counter models. The warranty will be
void if this is done.
When placing the product, pay attention not
to damage the floor, walls, piping, etc. Do
not hold the product from its door or panel
to move it.
Appropriate installation location
In the area where this product is
installed, there must not be a lockable,
sliding or hinged door that will restrict
full opening of the product’s door.
Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
•Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be installed
on a flat surface in order for the door to
be closed properly and securely.
•Do not install the product at places
where temperature may fall below 0ºC.
•Place the product on a hard floor. Do
not place it on a long pile rug or similar
surfaces.
Do not place the product on the power
cable.
•Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
•Install the product at a place close to
the tap and the drain hole. Select the
installation location by considering
that it will not be changed after the
connections are made.
Connecting water supply
We recommend installing a filter at
the water inlet in order to prevent the
dirt (sand, clay, rust) in the mains or
water installation of your home from
damaging the machine or the dishes.
4-
14/EN
Drain pipe must be connected to the
sewage system and it should not be
connected to any surface water.
Adjusting the feet
If the door of the product cannot be closed
properly or if the product rocks when you
push it slightly, then you need to adjust
the feet of the product. Adjust the feet of
the product as illustrated in the installation
manual supplied with the product.
Steam may escape if the door of the
dishwasher is not adjusted properly.
Hot steam may cause serious burns
and injuries and damage your furniture.
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. See the installation manual
supplied with your machine for detailed
information.
min
300*
min
120*
max 1000 *
min 500 *
* mm
Electrical connection
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the "Technical
specifications" table. Our company
shall not be liable for any damages
that will arise when the product is used
without grounding in accordance with
the local regulations.
•Connection must comply with national
regulations.
•Power cable plug must be easily
accessible after installation.
•Plug in the product to a grounded
socket which is protected by a fuse of
10 Amperes.
•The specified voltage must be equal to
your mains voltage.
Do not make connections via extension
cables or multi-plugs.
Damaged power cables must be
replaced by the authorised service
agent.
15/EN
Preparation
Read “Safety Instructions” section first!
Tips for energy saving
Following information will help you use the
product in an ecological and energy-efficient
manner.
Wipe away any coarse food remnants on the
dishes before putting them in the product.
Manual pre-rinsing of tableware items
leads to increased water and energy
consumption and is not recommended.
Washing tableware in a household
dishwasher usually consumes less energy
and water in the use phase than hand
dishwashing when the household dishwasher
is used according to the manufacturer’s
instructions.
Operate the product after filling it completely.
When selecting a programme, consider
the table of "Programme data and average
consumption values" given on Quick Guide.
Do not put more detergent than suggested
on the detergent package.
Water softening system
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This system
softens the supply water to a level that will
allow washing the dishes with the required
quality.
The mains water hardness must be
softened if it is over 7°dH. Otherwise,
hardness ions will accumulate on
the dishes that are washed and may
affect the washing, rinsing and drying
performances of the machine.
5- Adjusting the water softening
system
Washing performance will increase when
water softening system is adjusted properly.
Read “Quick Guide - Adjusting Water
Softening System” before this section!
The regeneration of the water softening
system can be done in all programmes
during drying step. When regeneration
occurs, duration, energy and water
consumption of the programme increase.
For regeneration process; frequency of
regeneration cycle, maximum additional
duration, water and energy consumption
are given in table below depending on
Eco 50°C programme water consumption,
when the dishwasher is run under standard
conditions with 14 dH water supply on its
Eco 50°C programme:
Eco 50°C water
consumption (l)
Regeneration after
…. cycles
Additional
duration (min)
Additional water
consumption (l)
Additional energy
consumption (kWh)
12,3-14,7 5 5 3,0 0,05
9,6-12,2 6 5 3,0 0,05
9,0-9,5 7 5 3,0 0,05
8,0-9,0 8 5 3,0 0,05
7,0-7,9 9 5 3,0 0,05
16/EN
4. Fill the salt reservoir with salt by
using the salt funnel (D). To speed up
dissolution rate of salt in water, stir it
with a spoon.
You can put about 2 kg of softening
salt into the salt reservoir.
5. Replace the lid and tighten it when the
reservoir is full.
You need to add salt right before
starting the machine. Thus, the
overflowing salty water will be flushed
immediately, preventing the risk
of corrosion in machine. In cases
where you would not start washing
immediately, run your machine empty
in the shortest programme.
Since different salt brands in the
market have different particle sizes and
since the water hardness may vary,
dissolution of the salt in water may
take a couple of hours. Therefore, Salt
Indicator remains on for a while after
adding salt into the machine.
Detergent
You can use powder, liquid/gel or tablet
detergents in the machine.
Only use detergents produced
particularly for use with dishwashers.
Note that detergents that contain
chlorine and phosphate can be harmful
for the environment. Liquid detergents
without chlorine may not remove tea
and coffee stains from cups.
For the water consumption of your
dishwasher on Eco 50°C programme,
look at the Programme data and average
consumption values table given on Quick
Guide.
Adding salt
Water softening system needs to be
regenerated in order for the product
to operate with the same performance
continuously. Dishwasher salt is used for
this purpose.
Use only special softening salts
produced particularly for the
dishwashers in your machine.
It is recommended to use granule- or
powder-formed softening salts in the
water softening system. Do not use
salts that do not completely dissolve
in water such as table salt or rock
salt. Otherwise the performance of the
system may deteriorate in time.
Salt reservoir will be filled with water
when you start the product. For this
reason, add salt before operating the
machine.
1. Firstly, take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A).
3. Add 1 liter of water to salt reservoir of
your machine only in initial use.
17/EN
using detergent tablets.
3. Push the lid of the detergent dispenser
to close it. A "click" will be heard when
the lid is closed.
1
2
3
Use powder or liquid/gel detergent in
short programmes without prewash
since the solubility of the tablet
detergent changes depending on the
temperature and time.
Adding detergent
Pay attention to the warnings on the
detergent packaging to get better
washing and drying results. Contact
the manufacturer of the detergent for
further questions.
Do not put solvents into the detergent
dispenser. There is the risk of
explosion!
Put the detergent into the detergent
dispenser just before operating the
machine as illustrated below.
1. Push the latch to right to open the
detergent dispenser lid (A). (depends
on model)
2. Put suggested amount of powder,
liquid/gel or tablet detergent in the
reservoir.
Inside the detergent dispenser there
are level markings that help you
use appropriate amount of powder
detergent. When brimful, detergent
dispenser will contain 45 cm³ of
detergent. Fill detergent up to 15 cm³
or 25 cm³ level marks in the detergent
dispenser according to fullness of the
machine and/or soiling degree of the
dishes. One tablet is enough if you are
18/EN
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
4. Make the appropriate rinse aid settings.
Rinse aid
The rinse aid used in dishwashers
is a special combination that aims to
increase drying efficiency and prevent
water or lime stains on the washed
items. For this reason, care must be
paid to have rinse aid in the rinse
aid reservoir and to use rinse aids
produced specially for dishwashers
only.
1. Open the lid of the rinse aid reservoir
with the help of the latch.
2. Fill the reservoir until “MAX” level.
Tablet detergents
In addition to the conventional tablet
detergents, there are also commercially
available detergent tablets that show water
softening salt and/or rinse aid effect. Some
types of these detergents contain special-
purpose components such as glass and
stainless steel protectors. These tablets
show their effects up to a certain water
hardness level (21°dH). Water softening
salt and rinse aid must also be used
together with the detergent if the water
hardness level is above the mentioned
level.
The best washing performance in
dishwashers is obtained by using
detergent, rinse aid and water
softening salt individually.
Observe the instructions of the
detergent manufacturer on the package
when using tablet detergents.
Contact the detergent manufacturer if
your dishes are wet and/or if you notice
limescale spots particularly on your
glasses after the washing programme
is over when using a tablet detergent.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
19/EN
3. Slightly press the point (B) of the
reservoir lid to close it.
4. If there are stains on tableware items
after washing, level must be increased
and if there is a blue trace after wiping
them by hand, it must be decreased.
This is set to position 3 as factory
default.
The rinse aid adjustment is described
under "Adjusting the amount of rinse
aid" in the section for operating the
machine.
Wipe clean any spilled rinse aid
outside the reservoir. Rinse aid that
spilled accidentally will cause foaming
and it will eventually decrease washing
performance.
Items not suitable for washing in
the dishwasher
•Never wash dishes soiled by cigarette
ash, candle remnants, polish, dyestuff,
chemicals, etc. in your dishwasher.
•Do not wash silverware and cutlery
with wooden or bone stems, glued
pieces, or pieces that are not resistant
to heat, as well as copper and tin-
plated containers in the dishwasher.
Decorative prints of chinaware as well
as aluminium and silver items may get
discoloured or tarnished after washing
in the dishwasher just as it happens in
handwashing as well. Some delicate
glass types and crystals may become
dull in time. We strongly recommend
you to check if the tableware you
are going to purchase is suitable for
washing especially in the dishwasher.
Placing the dishes into the
dishwasher
Depending on the capacity of your
dishwasher, you can use your dishwasher
in the optimum way with respect to energy
consumption and washing and drying
performance only if you place the dishes in
an orderly way.
•Wipe away any coarse food remnants
(bones, seeds, etc.) on the dishes
before placing them in the dishwasher.
•Place thin, narrow pieces in the middle
sections of baskets if possible.
•Place the heavily soiled and bigger
items in the lower basket and smaller,
delicate and light items in the upper
basket.
•Place the hollowed dishes such as
bowls, glasses and pans upside down
in the dishwasher. Thus, accumulation
of water in deep hollows is prevented.
To prevent possible injuries, always
place the sharp and pointed dishes
such as service fork, bread knife, etc.
upside down so as their pointed ends
will face down or lay them horizontally
in the dish basket.
Unload dishes in the lower basket first and
then the dishes in the upper basket.
20/EN
Suggestions for loading the dishwasher
Lower basket
Upper basket
Improper Loading Of Dishware
Improper Loading Of Dishware
21/EN
Cutlery basket
(depends on model)
Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in an
efficient manner.
Since the cutlery basket can be moved
(A, B), you can create more space while
placing your dishes in the lower basket and
free up space for your dishes of different
sizes.
Cutlery basket
(depends on model)
Cutlery basket is designed to wash your
dishes such as knife, fork, spoon, etc. in an
efficient manner.
Since the cutlery basket can be moved
(A, B), you can create more space while
placing your dishes in the lower basket and
free up space for your dishes of different
sizes..
22/EN
Collapsible lower basket tines
(depends on model)
There are foldable tines (A) located at
the lower basket of the machine are
designed for an easier placement of large
pieces such as pans, bowls, etc. You can
create larger spaces by folding each tines
individually or all of them at once.
To bring the collapsible tines into horizontal
position, grab the tines from mid position
and push them in the directions of arrows
(B). To bring the tines back to vertical
position, just lift them up. Collapsible tines
will click into the latch again (C).
Bringing the tines to the horizontal
position by holding them from the tips
may cause them to bend. Therefore,
it will be appropriate to bring the tines
in the middle to horizontal or vertical
position by holding them from their
stems and pushing in the direction of
arrow.
Collapsible lower basket tines
(depends on model)
There are foldable tines (A) located at
the lower basket of the machine are
designed for an easier placement of large
pieces such as pans, bowls, etc. You can
create larger spaces by folding each tines
individually or all of them at once.
To bring the collapsible tines into horizontal
position, grab the tines from mid position
and push them in the directions of arrows
(B). To bring the tines back to vertical
position, just lift them up. Collapsible tines
will click into the latch again (C).
Bringing the tines to the horizontal
position by holding them from the tips
may cause them to bend. Therefore,
it will be appropriate to bring the tines
in the middle to horizontal or vertical
position by holding them from their
stems and pushing in the direction of
arrow.
23/EN
Tray Wash Supports
(depends on model)
Use the supports to wash trays in the
bottom basket.
See the Auxiliary functions section for
appropriate programme and function
selection.
Tray Washing Support
(depends on model)
You may use the tray washing supports
if you want to wash a tray on your lower
basket.
Refer to the Additional Functions section to
select the proper program and function.
You may fold this part when it is not used to
facilitate the placement of your dishes.
12
You may also remove the part when
required as shown in figures 1 and 2.
The tray washing supports shall be
removed as shown in figures 1 and
2 for performance inspection tests
that shall be performed as per the
standards.
24/EN
SoftTouch Accessory
(depends on model)
The SoftTouch Accessory found in the
lower basket of your machine enables a
safe washing for your fragile glasses.
Lower Basket Glass Holder
(depends on model)
Lower Basket Glass Holder found in the
lower basket of your machine enables a
safe washing for your oversized and tall
glasses.
Lower basket multipurpose /
height adjustable service rack
(depends on model)
This accessory located at the lower basket
of your machine allows you to easily wash
pieces such as extra glasses, long ladles
and bread knives.
You may use the racks as required by
moving them to lower or upper position,
or close them to create a wider space
in your lower basket.
Make sure that the impeller does not
touch the dishes you placed on the
racks.
25/EN
To close the racks:
1. Fold the rack (A).
2. Slide the rack up (B).
3. Put the rack in vertical position (C).
4. Slide the rack down and lock it by the
tabs (D).
You may open the racks in the same
process in reverse order.
To adjust the height of the racks:
1. Fold the rack (E).
2. Slide the rack up (F).
3. Open the rack at the desired level (G).
Upper basket height adjustable
rack
(depends on model)
Use the lower and upper parts of the height
adjustable racks in the upper basket of
the machine by sliding them down or up
according to the heights of the glasses,
cups or etc. (A, B, C).
Lower basket bottle wire
(depends on model)
The bottle wire is designed for easier
washing of long pieces with wide mouths.
You may take out the bottle wire from the
basket when not in use by pulling it out
from both sides (H).
26/EN
Upper basket multipurpose
service rack
(depends on model)
This accessory located at the upper basket
of your machine allows you to easily wash
pieces such as extra long ladles and bread
knives.
You can lift up the upper basket
multipurpose service rack to remove it if
you do not want to use it.
If you want to use the upper basket
multipurpose service rack again, you can
easily attach it to the side section of your
upper basket.
Upper basket multi-function
service rack
(depends on model)
Thanks to the upper basket multi-function
service rack on the upper basket of your
appliance, you may load and wash long
service-ware and kitchen-ware easily. Also,
the wineglass securing compartments
available on the front side of this accessory
allows easier placing of the stemware with
proper sizes on the upper basket.
You may remove the upper basket multi-
function service rack by lifting it upwards
when you do not want to use it.
You may reinstall the upper basket multi-
function service rack on the side of your
upper basket easily to use it again.
27/EN
To lower the basket, while it is in the
uppermost position;
1. Hold the upper basket wires with both
hands, slightly lift up the basket and
simultaneously push and release the
latches shown in the figure (B).
2. Lower the basket from its current
position to the lower one.
3. Release the basket after it has reached
one level down.
Repeat the process if the height is not
sufficient.
The movement mechanism may not
function properly if the upper basket is
overloaded or if the weight distribution
is not balanced. In heavier conditions,
there is the risk of falling one level
down.
Make sure that the adjustment
mechanism has the same positions
on the right and left sides of the upper
basket.
Adjusting the height of the upper
basket
(depends on model)
The upper basket height adjustment
mechanism has been designed for you to
create large spaces in the lower or upper
sections of your machine depending on
your needs by adjusting the height in the
upper or lower direction while your basket
is empty or loaded.
Thanks to this mechanism, you can use
your basket in three different positions,
namely lower, middle and upper positions
(1, 2, 3).
1. To raise your basket, hold the upper
basket wires with both hands while the
basket is in the lowermost position and
pull them up (A).
2. You will hear a "Click" from the right
and left mechanisms, indicating that
the basket has reached the next level.
Release the basket.
Repeat the process if the height is not
sufficient.
1
2
3
28/EN
Adjusting the height of the upper
basket
(depends on model)
Upper basket height adjustment
mechanism is designed so that you can
create wide spaces on the upper or lower
compartment of the machine by adjusting
the basket upwards or downwards either
while it is empty or full.
Thanks to this mechanism, you may use
your basket in three different positions,
namely lower, center or upper positions.
To lower the basket, perform the following
while the basket is at uppermost position;
1. Hold the wires of the upper basket and
raise the handle of the mechanism
upwards as shown in the figure (A).
2. Lower the basket to the next lower
position.
3. Release the basket when it catches on
to the next lower position.
Repeat the same operation if the height is
not adequate.
1
2
3
1. To raise the basket, hold the wires of
the basket and pull the basket upwards
with both hands while the basket is at
the lowermost position (B)
2. Release the basket when it catches on
to the next upper position with a “Click”
that may be heard from the right and
left mechanisms.
Repeat the same operation if the height is
not adequate.
1
2
3
The movement mechanism may not
work properly when the upper basket is
overloaded or when the load is
unbalanced. And it may fall to the next
lower position in heavier conditions.
Ensure that the adjustment
mechanisms on the right and left of the
upper basket are aligned.
30/EN
Ceiling cutlery basket
(depends on model)
Ceiling cutlery basket is designed to wash
your cutlery items such as forks, spoons
and etc. by placing them between the bars
on the basket.
Ceiling cutlery basket
(depends on model)
Ceiling cutlery basket is designed to wash
your cutlery items such as forks, spoons
and etc. by placing them between the bars
on the basket.
1
In models with partial movement feature,
pushing the bar (1) on the handle enables
the central tray of the basket to get to
the lower position and the system gets
unlocked. Thus right and left side trays can
be used as moving parts.
The free space enabled by the side trays
allows long parts to be loaded in the upper
basket.
When the central tray is in the lower
position, you can load long/high items
such as coffee cups, ladles, etc. on the
tray. When the side trays lean on two side
walls, the handle can be pulled to allow the
central tray to rise and the system to be
locked.
31/EN
Operating the product
6-
On/Off Key
When you press the On/Off key, the
indicator lights illuminate on the display
for ON position. The lights turn off in OFF
position.
Programme Selection /
Programme Cancel key
Select the desired programme using the
“programme selection keys” and press the
button.
To cancel the running programme, open the
door of the machine and press and hold the
Programme Start/Pause/Cancel key for 3
seconds.
After the 3 - 2 - 1 countdown, 0:01 is
displayed, close the door of the product
and wait for the draining process complete.
Draining is completed in 2 minutes and the
machine gives an audible warning when it
is completed.
Function Keys
If you press any of the Function keys
during programme selection or time delay
selection, an affirmative key signal will be
heard provided that the relevant function
is supported by the selected programme.
Function will be deemed selected when the
indicator of the selected function is lit.
To cancel the selected function, keep the
function key pressed until the function
indicator disappears.
Preparing the machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with
the instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent into
the detergent dispenser.
Programme selection
1. Press the On/Off button to turn on your
machine.
2. Check the Salt and Rinse Aid indicators
and add salt and/or rinse aid if needed.
3. Refer to the table of "Programme data
and average consumption values"
to determine a washing programme
suitable for your dishes.
4. Selected programme will start when
you close the door of your machine.
Additional functions
Washing programs of the machine are
designed to achieve the best cleaning
performance by considering the soil level,
the amount of dirt and the characteristics of
the dishes to be washed in the machine.
Additional functions have been added to
help you save time, water and energy and
to perform a more hygienic and comfortable
washing, thanks to the customized features
settings.
Additional functions may change the
duration of the selected program.
Additional functions are not suitable for
all washing programs. The indicator of
the function that is not suitable for the
program will not be active.
Functions that can be used in washing
programs are shown with letters
such as
" A,B,D,E,G,F,K..."
in the
"Program information and average
consumption values table. You can
find instructions on the use of these
functions in the "Additional functions"
section of the user manual.
Read “Safety Instructions” section first!
Read “Quick Quide” before this
section.
Produkt Specifikationer
| Mærke: | Grundig |
| Kategori: | Opvaskemaskine |
| Model: | EGNLP 4631 XCW |
Har du brug for hjælp?
Hvis du har brug for hjælp til Grundig EGNLP 4631 XCW stil et spørgsmål nedenfor, og andre brugere vil svare dig
Opvaskemaskine Grundig Manualer
12 Marts 2025
12 Marts 2025
12 Marts 2025
13 Januar 2025
30 December 2025
16 December 2024
16 December 2024
13 December 2024
13 December 2024
13 December 2024
Opvaskemaskine Manualer
- Opvaskemaskine Elis And Elsa
- Opvaskemaskine Philco
- Opvaskemaskine Brandt
- Opvaskemaskine Tomado
- Opvaskemaskine Leonard
- Opvaskemaskine V-Zug
- Opvaskemaskine Jenn-Air
- Opvaskemaskine Scandomestic
- Opvaskemaskine Schulthess
- Opvaskemaskine Siemens
- Opvaskemaskine Stoves
- Opvaskemaskine Everdure
- Opvaskemaskine Privileg
- Opvaskemaskine Scholtès
- Opvaskemaskine Exquisit
Nyeste Opvaskemaskine Manualer
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
4 Juni 2025
3 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025