Hedbox RP-DC100 Manual

Hedbox Ikke kategoriseret RP-DC100

Læs gratis den danske manual til Hedbox RP-DC100 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Hedbox RP-DC100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Page 1

Page 5

Page 6

1 Plug the Power Cord on the AC power (picture A). .

2. Turn ON the AC Power Switch.

3. The Power LED indicator will illuminate Red during AC power. (picture B).

Page 2

Page 4Page 3

1. When you insert Battery to the Charger, LED “Battery” indicator illuminate

BLUE, indicate that the battery is ready for charging. The Charger have two

charging plates, that on the LED Indication screen is indicated as CH1 (L) &

CH2 (R). After insertion one (1) Battery on charger, charging process start

automatically with 3A±400mAh (Single Mod). If you insert second Battery

charging process will switch to Dual Mod 2A±400mAh (Simultanius Charging).

Charger LED “Charging” indicator illuminate RED indicate that the charging

process of the Battery is activate. (picture C.)

Thank you for your purchase of the Professional Dual Simulatius Power Bank Battery

Charger RP-DC100. This intelligent charger for Digital Camera and Camcorder

Batteries was designed with advanced power charging technology, allowing you to

charge your Professional Batteries at Studio place, or at the home. The Charger is

compatible with Li-Ion Rechargeable Batteries that run on power voltage of 14.4V to

14.8V. Please read these operating instructions carefully before operating use this unit

to power up Professional Camcorder or to Charge Battery Pack.

Product Features

1. Charge a Professional Battery Pack that run on 14.4V to 14.8V

2. Supply Power for Professional Studio Cameras, LED Light, Field Recorders etc.

4. LED Displays the battery ON, Charging Status, Power Status and BackUp Power

Supply Status, with red, blue and green colors

5. Provide constant Output voltage of: 16.5V / 4.5A ; 75W

6. Worldwide use with input between 100-240V;

7. With advanced MCU Micro-Computer Chip control, charger fully control the

charging process of the Li-Ion Professional Battery.

8. With CH1 or CH2 Battery attached to the unit, on DC Out provide Power Bank mod

BackUp Power Supply-UPS (Uninterruptible power supply) in case of AC failure.

9. 100,000 level of Anti-Static design, High Temperature and Fire-Proof makes it safer.

10. Passed MBTR 5000H test and own its patent with more reliable quality warranty;

11. Safety protection：

- Over temperature protection reaches at 85 , ℃

- Over voltage protection reaches at 19.5V,

- Over current protection reaches at 6.5A,

and have Short circuit protection & Charging time protection.

Overview

Product Components:

1. Main Power switch ON/OFF

2. Power Socket 100V - 240V / 50-60Hz

3. Fan Cooler ( Provide cooling of the unit)

4. Power LED Indicator (Red Color status charger unit is ON)

5. CH1 and CH2 Battery Charging LED Status

6. Battery connected on charger LED Status

7. UPS (Uninterruptible power supply) BackUp Power Supply LED status

8. Battery release pushup button

9. 4-Pin XLR (Female) DC Output 16.5V / 4,5A 75W

10. Spider stability support legs

Operation Instruction:

AC Input : AC 100-240V / 50-60Hz

DC Out : 16.5V / 4.5A ; 75W

Charger Out : Single Battery Charging Mod:

CH1 (L) or CH2 (R) : 16.8V / 3.0A

Dual Battery Charging Mod:

CH1 (L) and CH2 (R): 16.8V / 2.0A

Output Connection : 4 Pin XLR (Female)

Operating Temp.: -10 to 40 C

Dimensions: 225 x 141 x 100mm

Weight: 1200g

Please check that the components size and voltages will be compatible according to

your Camcorder DC Voltage Input or Battery Pack Charging Voltage and Current.

Please use the manual instruction of the Camcorder or Battery Pack, and read this

manual carefully before using the unit with this AC Adaptor / Charger.

We are not responsible for any damage caused by incorrect use or operation.

1. This device is for indoor use only, don’t put or use it in high temperature and high

moisture environment;

2. It’s a common phenomenon for the unit to feel hot when using;

3. Avoid falling and bumping otherwise the electrical components will be damaged;

4. Don’t try to disassemble or open the cover under any circumstance in order to

avoid danger.

Notice

Caution

Specification

1.To Power any Pro Camcorder or any other unit with constant power, on DC

out, use the supplied cable with 4-pin XLR (Male to Female) RPC-DC4X4

Connector. Conect the cable to the Charger DC 4Pin Power Out (picture F.)

2. When a Cable is plugged into the 4-pin XLR auxiliary Power RPC-DC4X4

output, and the Main Power switch off the Charger RP-DC100 is , ON

charging process of the Battery will be suspended. The “Charging” LED will

go OFF and “Battery” LED indicator (if the battery is on the charger) will

illuminate BLUE. In this case output power is 16.5V 4.5A/ 75W.

3. If you turn the main Power Switch on the Charger or unexpected OFF

main electric power failure occur (AC input is cut off), Charger RP-DC100

with the inserted Battery, will automatically go to the UPS BACK UP POWER

MODE. In this case the RP-DC100 provide power to the DC Out, from the

battery that is attached to the charger, the “Adaptor UPS” LED indicator

illuminate GREEN, indicate that the power from the Battery is provideing to

the DC Out.

4. When two Batteries are attached on the charger at the same time, the

UPS Powering from the battery to the DC Out is made by priority.

5. Once the cable is unplugged, the charger will continue the previous

charging sequence and from the same point of interruption.

10.

Battery Instalation on Charger:

1. On the bottom of the Charger

use and spread wide the Spider

Stability Support legs, this will

ensure that the charger will

have extra stability when the

Battery is attached to the main

body of the RP-DC100

Charger.

2. Use Professional V-lock or

Gold Mount Battery, insert

battery in to the V-lock or Gold

Mount plate. Observe the

Charger LED “Battery”

indicator, it will illuminate BLUE,

if the battery is attached

appropriate.

Charging Battery Pack:

2. If the SOC≥85% ( State Of Charging) Charger LED “Charging” indicator

illuminate GREEN, indicate that the charging process is on the finishing state.

(picture D.)

3. When the charging process is finish

and battery is fully charged, Charger

LED “Charging” indicator will go OFF,

indicate that the charging process is

done and the battery is full and ready

for use. Remove the Battery from the

charging Plate. (picture E.)

DC Out Powering & Power Bank Mod:

Produkt Specifikationer

Mærke:	Hedbox
Kategori:	Ikke kategoriseret
Model:	RP-DC100

Har du brug for hjælp?

Hvis du har brug for hjælp til Hedbox RP-DC100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Hedbox Manualer

Hedbox UNIX-FX9 Manual

11 Juli 2025

Hedbox HED-FZ100H Manual

10 Juli 2025

Hedbox HED-NPF1000 Manual

5 Juli 2025

Hedbox PROBANK 2XL Manual

21 Juni 2025

Hedbox GIGABANK Manual

20 Juni 2025

Hedbox HED-NPF775 Manual

5 April 2025

Hedbox HED-NPF995 Manual

5 April 2025

Hedbox HED-BP75D Manual

10 Marts 2025

Hedbox HED-NPF555 Manual

19 Februar 2025

Hedbox NERO S Manual

10 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Beverage-Air PH2-1BG Manual

12 August 2025

Dito Sama 603848 Manual

12 August 2025

Magellan GPS 300 Manual

12 August 2025

Gourmia GCM1435 Manual

12 August 2025

Lorex LHWF1006 Manual

12 August 2025

Ingenico Lane 5000 LE Manual

12 August 2025

Navman MiVue True 4K DC Manual

12 August 2025

Dito Sama 600144 Manual

12 August 2025

Fujifilm GFX 100RF Manual

12 August 2025

Dito Sama 600136 Manual

12 August 2025