Hikoki DH 24PX Manual

Hikoki Boremaskine DH 24PX

Læs gratis den danske manual til Hikoki DH 24PX (16 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Hikoki DH 24PX, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
Rotary Hammer
Read through carefully and understand these instructions before use.
Handling instructions
DH 24PX • DH 26PX • DH 28PX
DH28PX
2
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust.
Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool.
Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before turning
the power tool on.
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Read all safety warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.

Produkt Specifikationer

Mærke: Hikoki
Kategori: Boremaskine
Model: DH 24PX

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikoki DH 24PX stil et spørgsmål nedenfor, og andre brugere vil svare dig


Boremaskine Hikoki Manualer

Hikoki

Hikoki DH52MEY Manual

5 Juli 2025
Hikoki

Hikoki DH3628DC Manual

4 Juli 2025
Hikoki

Hikoki DH28PCY2 Manual

8 December 2024
Hikoki

Hikoki DH26PC2 Manual

8 December 2024
Hikoki

Hikoki DV36DA Manual

8 December 2024
Hikoki

Hikoki DS12DD Manual

19 Maj 2024
Hikoki

Hikoki D10VST(L) Manual

7 Maj 2024
Hikoki

Hikoki DV18DBFL2 Manual

23 Marts 2024
Hikoki

Hikoki DS9DVC Manual

14 Februar 2024
Hikoki

Hikoki DH 24PH2 Manual

13 Januar 2024

Boremaskine Manualer

Nyeste Boremaskine Manualer

Holzmann

Holzmann ZX7045PRO Manual

31 Juli 2025
Einhell

Einhell TE-CD 18/40 Li BL Solo Manual

30 Juli 2025
Rothenberger

Rothenberger RoDIADRILL 200 Manual

30 Juli 2025
Holzmann

Holzmann GSM16E Manual

30 Juli 2025
Eibenstock

Eibenstock EBM 182/3 Manual

30 Juli 2025
Eibenstock

Eibenstock ESD 162 Manual

30 Juli 2025
Eibenstock

Eibenstock END 1550 P Manual

30 Juli 2025
Holzmann

Holzmann SB203V Manual

30 Juli 2025
Eibenstock

Eibenstock END 40 A Manual

30 Juli 2025
Eibenstock

Eibenstock PLD 450.2 Manual

30 Juli 2025