Hikoki NP1835DA Manual

Hikoki Hæftemaskine NP1835DA

Læs gratis den danske manual til Hikoki NP1835DA (80 sider) i kategorien Hæftemaskine. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Hikoki NP1835DA, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/80
Model
Modèle
Modelo
NP 1835DA
Cordless Pin Nailer
Micro pinnel sans fil
Clavadora de puntas inalámbrica
INSTRUCTION AND SAFETY MANUAL
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual to use the tool.
This manual should be stored in safe place.
MANUEL D’INSTRUCTIONS ET DE SÉCURITÉ
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque
d’entraîner la mort ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Cet outil ne doit jamais être utilisé par une personne n’ayant pas pris connaissance
du manuel.
Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES Y MANUAL DE SEGURIDAD
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones
serias o en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el martillo neumático.
La herramienta no deberá utilizarse sin haber leído previamente este manual.
Este manual debe ser guardado en un lugar seguro.
2024/05/23 12:39:14Stylesheet: NA Version: 2024.3.27
NP1835DA_C99282361_411_NA
English
2
IMPORTANT SAFETY INFORMATION
Read and understand tool labels and all of the operating
instructions, safety precautions and warnings in this
manual before operating or maintaining this nailer.
Failure to follow warnings could result in DEATH or
SERIOUS INJURY.
Most accidents that result from the operation and
maintenance of Nailers are caused by the failure to
observe basic safety rules or precautions. An accident can
often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing appropriate
safety procedures.
Basic safety precautions are outlined in the “SAFETY”
section of this Manual and in the sections which contain
the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or
machine damage are identified by DANGERS and
WARNINGS on the Nailer and in this Manual.
NEVER use this Nailer for applications other than those
specified in this Manual.
DEFINITIONS OF SIGNAL WORDS
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury, or may cause machine damage.
NOTE emphasizes essential information.
SAFETY
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
2024/05/23 12:39:14Stylesheet: NA Version: 2024.3.27
NP1835DA_C99282361_411_NA

Produkt Specifikationer

Mærke: Hikoki
Kategori: Hæftemaskine
Model: NP1835DA

Har du brug for hjælp?

Hvis du har brug for hjælp til Hikoki NP1835DA stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hæftemaskine Hikoki Manualer

Hikoki

Hikoki N1804DB Manual

7 August 2025
Hikoki

Hikoki NV45AB3 Manual

4 August 2025
Hikoki

Hikoki NV50AH Manual

4 August 2025
Hikoki

Hikoki NT1850DG Manual

4 August 2025
Hikoki

Hikoki NP1835DA Manual

21 Juli 2025
Hikoki

Hikoki NT1865DAA Manual

11 Juli 2025
Hikoki

Hikoki NR 1890DCA Manual

9 Juli 2025
Hikoki

Hikoki NT1865DSA Manual

9 Juli 2025
Hikoki

Hikoki NT65MA4 Manual

25 August 2024
Hikoki

Hikoki NR90AD Manual

25 August 2024

Hæftemaskine Manualer

Nyeste Hæftemaskine Manualer

Rapoo

Rapoo UCA-1016 Manual

11 September 2025
DeWalt

DeWalt DCN650 Manual

8 September 2025
Whirlpool

Whirlpool WEG745H0FH Manual

5 September 2025
DeWalt

DeWalt D51276 Manual

4 September 2025
DeWalt

DeWalt DCN691 Manual

4 September 2025
DeWalt

DeWalt DCN694 Manual

3 September 2025
DeWalt

DeWalt DPN90C-1-XJ Manual

3 September 2025
DeWalt

DeWalt DC610 Manual

3 September 2025
DeWalt

DeWalt DCN45RN Manual

3 September 2025
DeWalt

DeWalt DPN250MCN-XJ Manual

3 September 2025