Hikvision DS-PDMC-EG2-WE Manual

Hikvision Alarmsystem DS-PDMC-EG2-WE

Læs gratis den danske manual til Hikvision DS-PDMC-EG2-WE (3 sider) i kategorien Alarmsystem. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Hikvision DS-PDMC-EG2-WE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

DS-PDMC-EG2-WE/WB

Wireless Magnet Detector

Diagram References

E N G L I S H

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change,

without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks

and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES

NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL

HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF

SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING

FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS

PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU

SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY

ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

1Introduction

The sensor can detect the door or window opening. When the door or window is open, an alarm will be triggered and it will be sent to the alarm center or mobile client

via security control panel.

Door Magnetic Sensor Alarm: When the distance between the sensor and the magnetic stick is longer than 3 cm, an alarm will be triggered. The indicator will ash once.

Tamper Alarm: When removing the sensor, an alarm will be triggered.

Appearance

Indicator

Alarm Detection: Red LED ashes.

Detector Formatted: Red LED ashes 3 times.

Display Signal Strength:

Under the signal strength checking mode:

Solid Green for 3 s - Strong Signal

Solid Orange for 3 s - Medium Signal

Solid Red for 3 s - Weak Signal

Red light ashes for 3S, interval 250 ms - Failure

2TAMPER Button

Tampering Alarm: If the detector is disassembled, an alarm will be triggered.

Formatting: Remove the battery. Hold the TAMPER button and power the detector on at the same time. The red LED ashes 3 time when the formatting is

completed.

3Power Switch

4Interface

Battery

Installation Datum Line

Figure 2-1 Appearance

UD18214B

CAUTION

RISK OF EXPLOSION IF BATTERY

IS REPLACED BY AN INCORRECT

TYPE.

REPLACEMENT OF A BATTERY

WITH AN INCORRECT TYPE THAT

CAN DEFEAT A SAFEGUARD.

CAUTION

CHEMICAL BURNING DANGER

DO NOT SWALLOW THE

BATTERY

KEEP NEW AND USED

BATTERIES AWAY FROM THE

CHILDREN.

IF YOU THINK BATTERIES MIGHT

HAVE BEEN SWALLOWED OR

PLACED INSIDE ANY PART OF

THE BODY, SEEK IMMEDIATE

MEDICAL ATTENTION.

CAUTION

DISPOSE OF USED BATTERIES

ACCORDING TO THE INSTRUC-

TIONS AND LOCAL REGULATION.

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Dig the groove to disassemble the device. Remove the front and rear panel. Turn the power switch to ON to power on the device.

Note: Do not disassemble the device with sharps.

3Power On

4Enrollment

Figure 3-1 Power On

1. Check Signal Strength

Enter the signal checking mode by operating on the control panel. Trigger the detector.

Solid Green for 3 s - Strong Signal

Solid Orange for 3 s - Medium Signal

Solid Red for 3 s - Weak Signal

Red light ashes for 3S, interval 250 ms - Failure

2. Install the Detector

Dig the groove to disassemble the device.

Method 1: Secure the rear panel to the wall with two screws.

Method 2: Paste rear panel on the wall with the sponge tape.

Note: To make the TAMPER work properly, the thickness of the sponge tape should be no more than 1mm.

Close the front and the rear panel.

Note: You should install the sensor and the magnetic stick at the door or window’s edge. Make sure they are aligned with the door or window’s edge.

5Installation

6Functions

Figure 5-1 Installation

1Enroll the Peripheral Locally

2Enroll the Peripheral with QR and serial No.

1. Log in to the APP Store, download and install Hik-Connect.

2. Power on the security control panel.

3. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. to add the control panel.

1. In the APP, tap the "Enrollment Mode" button on the control panel page to make the control

panel enter the enrollemnt status.

2. Power on the peripheral, and it will be automatically enrolled to the control panel.

1. In the APP, tap the icon "+"and scan the QR code or serial No. on the peripheral.

2. Power on the peripheral, and it will be automatically enrolled to the control panel.

Function Description

The alarm will be triggered while the gap between the sensor and magnetic stick is

bigger than that shows in the table. The LED keeps blue for 2 s.

You can add two external inputs (each input can be set as NO\NC\TAMPER\Pulse) via

the AX PRO client.

While Any of the two inputs generates an alarm event, the contact reports the alarm to

the AX PRO. The LED keeps blue for 2 s.

Test

The cotact starts test automatically after being enrolled to the AX PRO. The LED turn

red.

Separate the contact, and make a gap between the sensor and stick. while the LED

turns green, the alarm is triggered by this gap . Adjust the installation position of the

contact to get a satised alarm gap.

Alarm

CAUTION

IF THE BATTERY COMPARTMENT

DOES NOT CLOSE SECURETLY,

STOP USING THE PRODUCT AND

KEEP IT AWAY FROM CHILDREN.

Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Produkt Specifikationer

Mærke:	Hikvision
Kategori:	Alarmsystem
Model:	DS-PDMC-EG2-WE
Bredde:	22.5 mm
Dybde:	23.2 mm
Højde:	103 mm
Vægt:	59 g
Antal pr. pakke:	2 stk
Produktfarve:	Hvid
Batterispænding:	3 V
Mærke kompatibilitet:	Hikvision Digital Technology