Hilti KB-TZ SS 316 Manual

Hilti Ikke kategoriseret KB-TZ SS 316

Læs gratis den danske manual til Hilti KB-TZ SS 316 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Hilti KB-TZ SS 316, eller vil du spørge andre brugere om produktet?

Side 1/2
2143080 A4-10.2019
3/8"
KB-TZ, KB-TZ SS 304,
KB-TZ SS 316
hnom tfix
tinst
WS
h0dh
hef
dbit
90°
d0 = Ø 38
90°
d0 = Ø 38
tinst
SI-AT-A22 +
SIW-6AT-A22**
Anchor diameter [inch] 3
/8
dbit [inch] 3
/8
Anchor Length [inch] 3 3 3
/4 5
hef [inch] 11/ * 2 121/ * 2 223/4* 11/ * 2 223/4*
min. hnom [inch] 113
/16 25/16 113
/16* 25
/16 31/16 113
/16 25/16 31/16
min. h0*** [inch] 2 2 5/82 25
/831
/42 25/831/4
Tinst [ft-lb] 25 25 25
Tinst (Masonry) [ft-lb] n/a 15 n/a 15 n/a n/a 15 n/a
dh[inch] 7/16 7/16 7/16
WS (Wrench Size) [inch] 9/16 9/16 9/16
max. tx [inch] 13 /16 5/16 19/16 11
/16 5/16 213
/16 25/16 19/16
1a 2
1b
3b
3a
Use only carbide-tipped masonry drill bits complying with ANSI B212.15.1994
* h ef
not approved for masonry. hef not approved for SS304 or SS316
** Adaptive torque (AT) system not applicable for installation in concrete masonry unit or grout lled block
** AT System not applicable for wood fastening applications
*** For a non-hole cleaning installation (step 1a or 1b), make sure to drill deep enough to achieve h 0
, taking into account the depth of debris remaining in the hole


Produkt Specifikationer

Mærke: Hilti
Kategori: Ikke kategoriseret
Model: KB-TZ SS 316

Har du brug for hjælp?

Hvis du har brug for hjælp til Hilti KB-TZ SS 316 stil et spørgsmål nedenfor, og andre brugere vil svare dig