HK Audio CXR-210 Manual

HK Audio Ikke kategoriseret CXR-210

Læs gratis den danske manual til HK Audio CXR-210 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om HK Audio CXR-210, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

CXR-210

Art. Nr.: 1008185

Flight & tilt rail of the CONTOUR X 210 LT

Flug- & Neigeschiene der CONTOUR X 210 LT

Original mounting instructions 1.0

Original-Montageanleitung 1.0

Mounting instructions

1. Important notes on safety and use……………………………2

2. Introduction…………………………………………….…………………4

3. Dimensions & technical specifications…………………….…4

4. ICF……………………….……………………..……………………………..4

5. Mounting the CXR-210 ………………………………………………4

6. Angle table……………………………………….……………………….6

7. Intended use……………………………………..………………………6

Montageanleitung

1. Wichtige Hinweise zu Sicherheit und Gebrauch ………8

2. Einleitung…………………………………………………………………10

3. Abmessung & technische Daten…………………………….…10

4. ICF……………………..……………………..……………………………..10

5. CXR-210 Montage……………………..…………………………….10

6. Winkeltabelle…………………………………...……………………..12

7. Bestimmungsgemäße Verwendung…..……………………..12

CONTOUR X 210LT

Welcome to the HK Audio family!

Thank you for choosing a brand-name product

made by our company. It was engineered and

built with the greatest care so it will serve you

well for many tomorrows to come.

Be sure to read these operating instruc-

tions carefully and keep them for future

reference. Here's wishing you the best sound at

every occasion!

Your HK Audio Team

Warranty

you’ll then get a free 5-year warranty!

http://warranty.hkaudio.com

The warranty registration is only valid if made

within 30 days of the date of purchase.

HK Audio

Technical service

Postfach 1509

66595 St. Wendel, Germany

Fax: +49 6851 905 100

Important notes on safety and use!

Please read before use!

This symbol, wherever it appears, alerts

you to important operating and maintenance

instructions in the accompanying literature. Read

the manual.

This symbol, wherever it appears, tells

you: Take care! Hot surface! To prevent burns you

must not touch.

All electrical and electronic products

including batteries should be disposed of

separately from the municipal waste stream via

designated collection facilities appointed by the

government or the local authorities.

Safety instructions

The suitability of the supporting structure

or the load-bearing capacity of the structure, as

well as the suitability and dimensioning of the

attachment points must be ensured before

installing the system.

"Information on the load-bearing capacity of

structures generally refers to static loads in a

vertical direction (without dynamic load compo-

nents).

Attachment points on the supporting structure

are regarded as interfaces to the structure and

must be able to safely absorb loads. Attachment

points are deﬁ ned positions on the supporting

structure, e.g. intersections on truss girders or

eyelets permanently attached to the supporting

structure. Below this interface to the structure,

all elements in the load line are designed to be

intrinsically safe. In addition, single-fault safety

measures are implemented where necessary. The

attachment of loads to structures is only permit-

ted if the operator can provide clear information

on the nominal load capacity of the attachment

points. In particular, these are:

• Size of the rated load capacity

• Rated load capacity in relation to the direction

of force

Only the attachment points approved by the

operator may be used. The operator’s speciﬁ -

cations for the load capacity of the attachment

points must not be exceeded either during

assembly and dismantling or during operation.

A load measuring device can be used for this

purpose. When planning an event or production,

dynamic forces, possible incident-induced loads

and additional loads during operation as well as

during assembly and dismantling must be taken

into account in addition to the dead loads. For

example, additional forces arise due to inclined

bracing and acceleration of loads as well as jerky

stopping of moving loads.” (Source: DGUV Infor-

mation 215-313).

In addition, the respective national law must be

observed.

The suitability and su cient load-bearing

capacity of the components used in connection

with the system in the load line (e.g. shackles

and other slings, lanyards, tensioning elements,

hoists, load-bearing equipment) must be

ensured for the application. Persons are only

permitted to stand under the system if all (other)

components in the load line are designed to be

intrinsically safe. Elements that are not expressly

intended for use above persons may be suitable

under certain circumstances if they are loaded to

a maximum of half the speciﬁ ed load capacity.

Round slings made of synthetic ﬁ bres may not

be used over people without additional securing.

In addition, the respective national law must be

observed. The operator is responsible for

maintaining the safe operating condition and for

the suitability of the elements used in the load

line.

The operator must arrange for the

following inspections to be carried out:

- Inspection of the components of the rigging

hardware (ﬂ ight rail, the rigging hardware

attached to the speaker cabinet and all other

components used for rigging) before ﬁ rst use

and thereafter periodically by a qualiﬁ ed/com-

petent person to ensure that they are in a safe

operating condition.

- After particular damage-causing events (e.g.

crash, overloading of system components),

the operator must arrange for an extraordinary

inspection of the a ected components by a

competent person.

The applicable national laws and regulations

must be observed with regard to the type, dead-

lines and scope of the inspections. The operating

conditions must be taken into account.

However, the scope of testing for the inspection

before initial commissioning, periodic inspection

and inspection after particular damage-causing

events includes at least the following criteria:

Condition, damage, cracks, deformation, corro-

sion, functionality/mobility, wear, fastening and

securing of detachable connections, e ective-

ness of interlocks, completeness of connecting

elements, legibility of type plate/permissible

load capacity.

The inspection interval for the periodic inspection

must not be more than one year. The inspections

must be documented.

- The components of the rigging hardware (ﬂ ight

rail, the rigging hardware attached to the

speaker cabinet and all other components used

for rigging) must be checked for visible defects,

wear, functionality, apparent operational safety

and legibility of markings by a person instruct-

ed with regard to this inspection at least before

each use.

If defects are found that impair safety or if the

markings can no longer be clearly identiﬁ ed,

the work equipment must be withdrawn from

further use until it has been properly repaired.

The secondary safety devices (safeties)

must be attached to the following points on the

mid/high units: - Suitable attachment points are

openings for attaching the shackles - The

attachment of secondary safety devices to parts

of the mid/high units other than those

mentioned here is prohibited.

Direct attachment (without ﬂ ight rail)

must only be carried out as described in these

instructions. To tilt the lifted system using

slings, only double-stranded slings that are also

designed for edge loading or equipped with edge

protection may be used. It must be ensured that

the shackles attached under the mid/high unit

can align freely and are not subjected to diagonal

pull. Attach the sling to the mid/high units using

the wide lugs in the centre of the speakers – it is

forbidden to attach it in the intermediate

position (between two speakers).

Version 1.0 04/2024

Produkt Specifikationer

Mærke:	HK Audio
Kategori:	Ikke kategoriseret
Model:	CXR-210

Har du brug for hjælp?

Hvis du har brug for hjælp til HK Audio CXR-210 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret HK Audio Manualer

HK Audio POLAR 12 MK2 Manual

19 Juni 2025

HK Audio POLAR 10 MK2 Manual

19 Juni 2025

HK Audio Vortis VR 11510 Manual

8 Marts 2025

HK Audio VORTIS 2 VR2-21214 Manual

8 Marts 2025

HK Audio VORTIS 2 VR2-11510 Manual

8 Marts 2025

HK Audio Vortis 2 VR2-11210 Manual

8 Marts 2025

HK Audio VORTIS 2 VR2-11514 Manual

8 Marts 2025

HK Audio VORTIS 2 VR2-11214 Manual

8 Marts 2025

HK Audio VORTIS VR 11514 Manual

8 Marts 2025

HK Audio VORTIS 2 VR2-10810 Manual

8 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kenmore SM2050 Manual

17 August 2025

Vulcan VBB1CF Manual

17 August 2025

MSW -WPD-PVDC4/2 Manual

17 August 2025

Kenmore DU1275 Manual

17 August 2025

YA-MAN Bloom 5 Manual

17 August 2025

OSD Audio NERO-CONTROL12 Manual

17 August 2025

Singercon SIN-ALD-2000 Manual

17 August 2025

Vulcan VIB2 Manual

17 August 2025

Mars Gaming MNBC5 Manual

17 August 2025

Mars Gaming MNBC6 Manual

17 August 2025