Honeywell 5102 Manual


Læs gratis den danske manual til Honeywell 5102 (4 sider) i kategorien Vault. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Honeywell 5102, eller vil du spørge andre brugere om produktet?

Side 1/4
The Honeywell trademark is used under license from Honeywell
International inc. Honeywell International inc. makes no
representations or warranties with respect to this product.
La marque déposée Honeywell est utilisée avec autorisation
d'Honeywell International Inc. Honeywell international Inc. ne fait
aucune affirmation et n’offre aucune garantie au sujet de ce produit.
La marca Honeywell se usa bajo licencia otorgada por Honeywell
International Inc. Honeywell International Inc. no hace ninn tipo de
representación ni garantía con respecto a este producto.
Models / Modèles / Modelos 5101 & 5102
STEEL SECURITY SAFE
COFFRE-FORT DE SÉCURITÉ EN ACIER
CAJA DE SEGURIDAD DE ACERO
Read this manual carefully and never store it inside the safe!
Read this manual carefully and never store it inside the safe!
Read this manual carefully and never store it inside the safe!
Models 5101 & 5102
Steel Security Safe with Digital Lock
PACKAGE CONTENTS
1 – Steel Security Safe
1 – Operation Manual
2 – Override Access Keys
4 – “AA” Batteries
1 – Mounting Kit w/ Bolts
DO NOT RETURN SAFE TO STORE!
If there are any missing parts or you have
difficulty setting up or operating your safe,
please contact our Consumer Assistance
Department by telephone:
1-877-354-5457
(USA & Canada)
Monday–Friday
7am - 5pm PST
PRODUCT OVERVIEW
A - Safe Entry Knob
B - Override Key Cover
C - Electronic Digital Keypad
D - Safe Cabinet Body
E - Safe Door Assembly
F - Serial Number Label
IMPORTANT: Remove plastic corners from outside of safe door before operating.
SETUP
STEP 1. OPEN SAFE WITH OVERRIDE KEY
1. Remove override key cover with small screwdriver.
2. Insert override key and turn left to unlock safe.
3. Turn knob to right and open safe door.
STEP 2. INSTALL BATTERIES
1. Remove battery compartment (A) cover on inside door.
2. Insert 4 “AA” batteries (included).
3. Replace the battery cover.
4. Do not close door before testing digital lock.
STEP 3. TEST DIGITAL LOCK
1. With door open, turn knob left to put locking door bolts (B) in lock position.
2. Remove override key and store in a secure place. NEVER STORE KEYS INSIDE SAFE!
3. Enter the preset pass code: “1”-“5”–“9”-“b” .
4. Turn knob to right within 5 seconds.
5. Lock bolts should recede into the unlocked position.
STEP 4. PROGRAM A NEW PASSCODE
1. With door open, press red reset button (C) inside door.
2. Yellow light is on, enter new pass code in 30 seconds.
3. Enter personal code (3 to 8 digits) followed by “A” or “B”.
4. Safe will beep and yellow light will turn off.
NOTE: The factory pre-set code will not work after a new pass code is programmed.
OPERATION
TO OPEN THE SAFE
1. To unlock and open safe, enter the pass code followed by “A” or “B”.
2. Turn door entry knob to the right and open door.
TO CLOSE THE SAFE
1. Close the door and hold it in the closed position.
2. Turn door entry knob to left to engage the lock bolts and lock safe.


Produkt Specifikationer

Mærke: Honeywell
Kategori: Vault
Model: 5102

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell 5102 stil et spørgsmål nedenfor, og andre brugere vil svare dig