Honeywell 5851 Manual

Honeywell Vault 5851

Læs gratis den danske manual til Honeywell 5851 (10 sider) i kategorien Vault. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Honeywell 5851, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/10
Model / Modèl / Modelo 5851 & 5852
STEEL DRAWER AND SHELF SAFE
COFFRE-FORT DE TIROIR EN ACIER
COFFRE-FORT AVEC TIROIR ET ÉTAGÈRE EN ACIER
Read this manual carefully and never store it inside the safe!
Lire attentivement ce manuel et ne jamais le garder à l’intérieur du coffre-fort !
¡Lea este manual cuidadosamente y nunca lo guarde dentro de la caja fuerte!
1
Model 5851 & 5852
Steel Drawer and Shelf Safe
PACKAGE CONTENTS
1 – Steel Drawer Safe
1 – Operation Manual
2 – Override Access Keys
4 – “AA” Batteries
1 – Mounting Kit w/ Bolts
1
– Removable Steel Shelf
1
– Foam Floor Mat
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your
safe, please contact our Consumer Assistance
Department by telephone.
Store will not accept returned products without
prior authorization. You must first contact our
consumer assistance department.
US/Canada
1-877-354-5457 (Toll Free)
Australia
0011-800-5325-7000 (Toll Free)
Germany
00-800-5325-7000 (Toll Free)
PRODUCT OVERVIEW
A - Safe Cabinet Body
B - Safe Door Assembly
C - Electronic Digital Keypad
D - Safe Entry Lever
E - Override Key Cover
F - Serial Number Label
G - Light On / Off Switch
H - Reset Button
I - Battery Cover
2
SETUP
STEP 1. OPEN SAFE DOOR
All new safes are shipped with the door unlocked. If the door has become locked during
shipping, open it with the override key as follows:
USING THE OVERRIDE KEY:
1. Remove Override key cover.
2. Insert override key and turn left to unlock safe.
3. Lift Lever towards you
4. Lift Safe door upwards until it locks in place
STEP 2. INSTALL BATTERIES
1. Remove battery cover on inside door.
2. Insert 4 “AA” batteries (included).
3. Replace the battery cover.
4. Do not close door before testing digital lock.
5. Insert batteries in the correct direction (See diagram)
STEP 3. TEST DIGITAL LOCK
1. With door open, make sure lever is in the locked position.
2. Enter the preset pass code: “1”-“5”–“9”-“B”.
3. Lift lever within 5 seconds.
4. Lock bolts should recede into the unlocked position.
STEP 4. PROGRAM A NEW PASSCODE
1. With door open, press reset button inside door.
2. Ready light flashes along with a beep.
3. Enter new code (3 to 8 digits) followed by “A” or “B”.
4. Safe will beep and ready light will turn off.
NOTE: The factory pre-set code will not work after a new pass code is programmed.
OPERATION
TO OPEN THE SAFE
1. Make sure lever is fully in the closed position
2. Enter your new code followed by “A” OR “B”.
3. Pull lever towards you and lift door open fully
TO CLOSE THE SAFE
1. Lower door by lever into closed position.
2. Turn door entry knob to left to engage the lock
bolts and lock safe.
NOTE: Safe will not operate if lever is not fully in the locked position.
3
SECURE LOCKOUT PERIODS
If a wrong code is entered three times in a row, the digital keypad will begin a five-minute
secure lockout period. During this secure lockout period the keypad will become disabled.
Once the lockout period has ex using the correct pass code. pired, the safe can be unlocked
You may use the override key to open safe, but keypad will complete the full lockout period.
OVERRIDE ACCESS KEY
If the pass code is unavailable or your keypad fails due to dead batteries or other malfunction,
you can open the safe using the override access key (see STEP 1. in the SETUP section).
REPLACING BATTERIES
Note: The pass code will not be erased if the batteries become weak or are removed.
To replace the batteries please follow the instructions in STEP 2. in the SETUP section. If your
batteries are completely dead and you cannot open the safe by using the digital keypad, use
the override access key to open safe and access the battery compartment.
NOTE: It is NOT RECOMMENDED to use Non-alkaline or rechargeable batteries. Weak or dead
batteries should be removed promptly. Also remove batteries if the safe will not be in use for an
extended period of time.
IF YOU FORGET THE PASSCODE
1.
Use the override access key to open safe. Refer to STEP 1 in the SETUP section.
2.
Program a new pass code. Refer to STEP 4 in the SETUP section.
LOCATING SAFE IDENTIFICATION NUMBERS
SERIAL NUMBER
Located on lower right corner on front of safe.
Do Not Remove Safe I.D. Tags!
KEY NUMBER
4 Digit Number etched on the metal collar located around
the key hole.

Produkt Specifikationer

Mærke: Honeywell
Kategori: Vault
Model: 5851

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell 5851 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vault Honeywell Manualer

Honeywell

Honeywell 5005P Manual

29 December 2024
Honeywell

Honeywell 1533 Manual

2 September 2024
Honeywell

Honeywell 5605W Manual

31 August 2024
Honeywell

Honeywell 5605 Manual

31 August 2024
Honeywell

Honeywell 5605B Manual

31 August 2024
Honeywell

Honeywell 5605P Manual

31 August 2024
Honeywell

Honeywell 1553 Manual

30 August 2024
Honeywell

Honeywell 5705 Manual

28 August 2024
Honeywell

Honeywell 5912 Manual

28 August 2024
Honeywell

Honeywell 1106W Manual

28 August 2024

Vault Manualer

Nyeste Vault Manualer

Phoenix

Phoenix SS0721EP Manual

11 Januar 2025
Phoenix

Phoenix Fire Fighter II FS0442E Manual

11 Januar 2025
Olympia

Olympia GOsafe H20 Manual

11 Januar 2025
SereneLife

SereneLife SLSV45EQG Manual

11 Januar 2025
Kogan

Kogan KADSAFM16LA Manual

8 Januar 2025
MSW

MSW -FPS-02 Manual

31 December 2025
Sistec

Sistec TSF 1909 Manual

30 December 2025
Burg Wächter

Burg Wächter Point-Safe P 1 E Manual

30 December 2025
Homak Security

Homak Security HS30103605 Manual

27 December 2024
Dometic

Dometic ProSafe MD 281C Manual

19 December 2024