Hooker 6075-90268 Manual

Hooker Seng 6075-90268

Læs gratis den danske manual til Hooker 6075-90268 (1 sider) i kategorien Seng. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Hooker 6075-90268, eller vil du spørge andre brugere om produktet?

Side 1/1
STEP 1.Attach the threaded bolts (A) into the two threaded holes that are at the
bottom of the posts of Bolt the Headboard and the Footboard. Slide the
Bed Rail onto the two Bolts (A) on one of the bed posts until the Bolts (A)
are visible through the holes on the inside of the Bed Rail.
STEP 2.Slide a Curved Washer (B) and a Nut (C) onto the Bolts (A) through the
holes in the Bed rail. Tighten all the Nuts (C), using the Open Wrench(D).
STEP 3.Assemble the leg supports to the bed slats.
STEP 4.Mount the assembled support slats onto the side rail with screws (E), then
use a Phillips head screwdriver to tighten screws
STEP 1,2
STEP 3
STEP 4


Produkt Specifikationer

Mærke: Hooker
Kategori: Seng
Model: 6075-90268

Har du brug for hjælp?

Hvis du har brug for hjælp til Hooker 6075-90268 stil et spørgsmål nedenfor, og andre brugere vil svare dig