
CRESCENT CUBER ICE MACHINE AND DISPENSER
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
* approximate size in inches, image not to scale
• Up to 476 lbs. of ice production per 24 hours
• Insulated polyethylene bin has a storage capacity of
• Durable, attractive one piece stainless steel exterior
• One piece design allows for easy installation and
• Self-contained design reduces oppportunities for
• Protected by H-GUARD Plus
• Push button operated; dispenses 13 lbs. of ice per minute
• 6” flanged legs are standard, Optional 6” casters
• Water valve accessory as an option
Stainless steel evaporator
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104 - 127V
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 1/4” Nominal ID Hard
Pipe (open drain system) or Copper Water Tubing (closed loop
• Allow enough space at rear for water supply and
drain connections, at least 12” (30 cm) clearance
at front and at least 0.6” (15 mm) clearance at top
Hoshizaki reserves the right to change specifications without notice.
*Rated in accordance with AHRI Standard 820 (I-P)
3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for
warranty in other countries.