Hoshizaki RFH3-SSB Manual

Hoshizaki Køleskab RFH3-SSB

Læs gratis den danske manual til Hoshizaki RFH3-SSB (2 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Hoshizaki RFH3-SSB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

RFH2-3-SSB

3/13

Item # 13255

RFH2-3-SSB

Professional Series Reach-in Dual Temps

nc. reserves the right to change

specifications without notice.

*AutoCad available on KCL

Item #

Project:

Qty:

• Stainless steel interior and exterior

• Energy efficient thermostatic expansion valve self contained refrigeration system

• EverCheck digital control system with audio alarms

• Entire cabinet is insulated with 2 3/8" foamed in place polyurethane

• Unique “ducted” air distribution system

• Self closing all stainless steel doors with locks

• Dual door frame heaters with energy saving on/off switch

• All metal torsion spring hinge design with stay open feature

• Exclusive "stepped" door design to protect recessed door gasket

• Flush mount door handles

• Field reversible doors (with optional kit)

• Epoxy coated evaporator coil

• Hinged upper front panel for easy access to controller

• Removable, cleanable refrigeration system air filter

• Energy efficient automatic hot gas condensate evaporator

• (3) Epoxy coated wire shelves per section

• Standard with 4" factory installed casters (2 with brakes)

• Three years parts and labor warranty

• Five year compressor warranty

618 Hwy. 74 S., Peachtree City, GA 30269

TEL 800-438-6087

FAX 800-345-1325

www.hoshizaki.com

RFH-SSB Dimensions

W x D x H

2 Section - 55” x 33.6” x 82.5”*

3 Section - 82.5” x 33.6” x 82.5”*

*with 4" casters

Electrical/Refrigeration

Voltage 115/60/1

HACR Breaker 30.0

Electrical Connection Hard-Wired

Junction Box

Voltage Range 104-126

Ambient Temp. Range 45˚-100˚F

Control Setpoint Range 36˚-50˚F (R)

-10˚ to +25˚F (F)

*Refrigerant R-404A

Warranty

Valid in United States, Canada, Puerto Rico,

and U.S. Territories. Contact factory for

warranty in other countries.

• Three Year - Parts & Labor on entire

machine.

• Five Year - Parts on: Compressor.

Options

• 6” legs with stainless steel bullet feet

• Door reversal kit

• Additional epoxy shelves

• Stainless steel shelves

• Patented foot pedal door opener

• Combination universal tray/pan slides

• Door padlock hasp

• NAFEM Data Protocol connection

(Software by other vendors)

Dimensions / Capacity

Electrical & Refrigeration Data

Model # Two Section

RFH2-SSB

Three Section

RFH3-SSB

Interior Storage Capacity (CF) 22.3 ft

ea. sec. (R & F) 48.0 ft

(R) / 22.3 ft

(F)

Overall Width x Depth 55” x 33.6” 82.5” x 33.6”

Height (including 4” casters) 82.5” 82.5”

Door Opening Width x Height 21.75” x 59.25” 21.75” x 59.25”

Depth with Door open at 90° 58.5” 58.5”

Adjustable Shelves 6 (3 ea.) 6 (R) / 3 (F)

Center Shelves - 3 (R)

Shelf Dimensions (W x D) 21.25” x 26” 21.25” x 26”

Crated Shipping Weight 750 lbs 950 lbs

Crated Height x Width x Depth 85” x 59” x 38” 85” x 87” x 38”

Model # Two Section

RFH2-SSB

Three Section

RFH3-SSB

Amperage

17 20.6

Energy Consumption (kwh/day)

12.9 17.1

Heat Rejection (BTU/Hr.)

2580 3035

Approx. Nominal Compres. BTU/HR(HP)

1490 (1/5HP) R / 2671 (2/3HP) F 1490 (1/5HP) R / 2671 (2/3HP) F

RFH2-3-SSB

Professional Series Reach-in Dual Temps

618 Hwy. 74 S., Peachtree City, GA 30269 • TEL 800-438-6087 • FAX 800-345-1325 • www.hoshizaki.com

SIDE VIEW (ALL UNITS)

DOOR SWING (ALL UNITS)

PLAN VIEW

33.6”

65.0”

58.5”

82.5”

55.0”

33.6”

82.5”

78.5”

4”

RFH2-SSB

Cabinet Construction

The exterior cabinet front, sides, shrouds and hinged front panel are constructed of high quality stainless steel. The exterior top, back and bottom are made from

galvanized steel. The cabinet interior walls and ceiling are stainless steel. The floor is stainless steel with coved corner construction. The “ducted” air flow

system is also constructed of heavy gauge stainless steel. Heavy duty ABS thermal breaks are used to reduce heat transfer. Three (3) heavy duty epoxy coated

shelves per section are standard (and include center shelves on two and three section models). Mounted on stainless steel pilasters the shelves are adjustable in

1” increments. The cabinet door perimeter heater provides condensation control in high humidity environments and is equipped with a back-up heater should

the primary fail. A manual power switch allows for energy savings in low humidity conditions. Cabinet walls and doors are insulated with 2 3/8” of

environmentally friendly R-134A, CFC free foamed in place polyurethane. The interior light is automatically activated when doors are opened. 4” factory installed

casters (2 with brakes) are standard.

Door Construction

Doors are constructed of high grade stainless steel inside and out and are standard with locks. Hoshizaki’s exclusive “stepped” design protects the recessed door

gasket as product is removed from the cabinet. Flush mount door handles maximize aisle space by eliminating protruding parts. The door hinges are all metal and

include an adjustable torsion spring closure that will not wear out like traditional cam-lift hinges. Hinge plates are constructed of eight (8) gauge stainless steel

and include a welded hinge pin. Doors stay open at 105˚and are self-closing at 75˚. Snap-in magnetic door gaskets are durable and easily removed for cleaning.

Door hinging is field reversible (with an optional door reversal hinge kit).

Refrigeration System

The high efficiency self contained refrigeration system is designed with a large capacity condenser and evaporator resulting in lower overall energy costs. The

refrigeration system components are mounted on a fully insulated roto-cast (ABS) housing that is removable from the main unit. All heat exchange takes place

above and outside the food zone and allows for 100% utilization of the interior storage area. The ducted air distribution system achieves a uniform cabinet

temperature eliminating “hot spots”, even when fully loaded with product. The evaporator coil is epoxy coated for extended life. Stainless steel refrigerant tubing

is used as the hot gas condensate evaporator. A thermostatic expansion valve controls the flow of R-404A refrigerant. A removable, cleanable air filter protects

the condenser coil and helps reduce cleaning requirements of the refrigeration system.

The EverCheck

Digital Control System monitors the operation and performance of the refrigeration system and is standard on all Professional Series units. The

EverCheck

includes solid state controls to maintain optimum cabinet temperature, and monitor high and low temperatures, high pressure, high and low voltage,

clean filter, door open and evaporator temperature functions. It also provides audio and visual alarms to alert the operator to possible problems. An LED display

shows the cabinet temperature and is adjustable to Fahrenheit or Celsius. The Professional Series freezer defrost is time initiated, temperature terminated.