Hotpoint Ariston AQ102F 49H EU AQUALTIS Manual

Hotpoint Ariston Vaskemaskine AQ102F 49H EU AQUALTIS

Læs gratis den danske manual til Hotpoint Ariston AQ102F 49H EU AQUALTIS (72 sider) i kategorien Vaskemaskine. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Hotpoint Ariston AQ102F 49H EU AQUALTIS, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/72
EN
1
English,1
Contents
Installation, 2-3
Unpacking and levelling
Connecting the electricity and water supplies
Technical data
Description of the machine, 4-5
Control panel
Running a wash cycle, 6
Wash cycles and options, 7
Table of wash cycles
Wash options
Detergents and laundry, 8
Detergent
Preparing the laundry
Washing recommendations
Precautions and advice, 9
General safety
Load balancing system
Disposal
Opening the porthole door manually
Care and maintenance, 10
Cutting off the water and electricity supplies
Cleaning the machine
Cleaning the detergent dispenser drawer
Caring for your appliance drum
Cleaning the pump
Checking the water inlet hose
Trouble shooting, 11
Assistance, 12
EN
WASHING MACHINE
AQUALTIS
AQ102F 49 H
Instructions for
installation and use
FR
Français,13
IT
Italiano,49
DE
Deutsch,25
Nederlands,37
NL PT
Português,61
EN
2
Installation
! This instruction manual should be kept in a safe place
for future reference. If the washing machine is sold, given
away or moved, please ensure the manual is kept with
the machine, so that the new owner may benefit from the
advice contained within it.
! Read these instructions carefully: they contain vital
information relating to the safe installation and operation of
the appliance.
! Inside the pack containing this manual, you will also find
the guarantee and all the details necessary for installation.
Unpacking and levelling
Unpacking
1. Once you have removed all the packaging from the
washing machine, make sure it has not been damaged
during transportation.
If it has been damaged, contact the retailer and do not
proceed any further with the installation process.
2. Remove the 4 protective
screws (used during
transportation) and the
corresponding spacer,
located on the rear part of
the appliance (see figure).
3. Close off the holes using the plastic plugs supplied in the
pack.
4. Keep all the parts in a safe place; they will be needed
again if the washing machine is moved to another location,
to prevent the inside of the appliance being damaged.
Unlocking the chest
To remove the bracket that locks the chest in place
and supports the tub during transportation, remove
the “central” screws, then hold it firmly as you push it
backwards and take it out; loosen the 4 “side” screws and
remove the metal strip.
After you have completed this process fit the plastic toe-
kick supplied (in the “chest”), making sure that the hooks
have been positioned in the holes provided before pushing
it towards the machine.
! For more detailed information please refer to the
guidelines provided inside the “chest”.
! Packaging materials should not be used as toys by
children.
Levelling
1. Place the washing machine on a flat sturdy floor, without
resting it up against walls or cabinets.
2. If the floor is uneven, the
front feet of the machine
may be adjusted until
it reaches a horizontal
position (the angle of
inclination must not exceed
2 degrees).
! If the appliance is levelled correctly, it will be more stable
and much less likely to cause vibrations and noise while it
is operating, particularly during the spin cycle.
! If it is placed on carpet or a rug, adjust the feet in such a
way as to allow a sufficient ventilation space underneath
the washing machine.
Connecting the electricity and water
supplies
Connecting the water inlet hose
! Before connecting the inlet hose to the water supply, run
the water until it is perfectly clear.
1. Connect the inlet hose
to the machine by screwing
it onto the cold water inlet
of the appliance, which is
situated on the top right-
hand side of the rear part of
the appliance (see figure).
2. Connect the inlet hose
by screwing it to a cold
water tab using a 3/4 gas
threaded connection (see
figure).
3. Make sure that the hose is not folded over or bent.
! The water pressure at the tap must fall within the values
indicated in the Technical data table (see next page).

Produkt Specifikationer

Mærke: Hotpoint Ariston
Kategori: Vaskemaskine
Model: AQ102F 49H EU AQUALTIS

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint Ariston AQ102F 49H EU AQUALTIS stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vaskemaskine Hotpoint Ariston Manualer

Hotpoint Ariston

Hotpoint Ariston ARXXD 149 Manual

29 September 2024
Hotpoint Ariston

Hotpoint Ariston Aqualtis AQD1170D 697 I Manual

19 September 2024
Hotpoint Ariston

Hotpoint Ariston WMYL6551 Manual

16 September 2024
Hotpoint Ariston

Hotpoint Ariston WMEF 7225 Manual

14 September 2024
Hotpoint Ariston

Hotpoint Ariston Aml 125 Manual

12 September 2024
Hotpoint Ariston

Hotpoint Ariston Aqualtis AQXXF 169 Manual

8 September 2024
Hotpoint Ariston

Hotpoint Ariston AQ86F 29 IT Manual

5 September 2024
Hotpoint Ariston

Hotpoint Ariston WMF 702 EU Manual

28 August 2024
Hotpoint Ariston

Hotpoint Ariston ac 128 l Manual

22 August 2024
Hotpoint Ariston

Hotpoint Ariston aq 8 l 49 u Manual

20 August 2024

Vaskemaskine Manualer

Nyeste Vaskemaskine Manualer

Samsung

Samsung WW90DB8U95 Manual

12 September 2025
Siemens

Siemens WI14S440 Manual

12 September 2025
Vivax

Vivax WFL-120712CD Manual

12 September 2025
Kubo

Kubo KBWM8321 Manual

12 September 2025
Vivax

Vivax WFL-140812CI Manual

12 September 2025
Kubo

Kubo KBWM8324 Manual

12 September 2025
LG

LG T1828AFPH5 Manual

12 September 2025
Siemens

Siemens WT47W568DN Manual

11 September 2025
BEKO

BEKO BM1WT3821W Manual

11 September 2025
Creda

Creda W200FW Manual

10 September 2025