Hotpoint Ariston SWD107617C Manual

Hotpoint Ariston Vaskemaskine SWD107617C

Læs gratis den danske manual til Hotpoint Ariston SWD107617C (16 sider) i kategorien Vaskemaskine. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Hotpoint Ariston SWD107617C, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
GB
1
! This symbol reminds you to read this instruc-
tion manual.
Contents
Installation, 2-3-4-5
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Care and maintenance, 6
Cutting off the water or electricity supply
Cleaning the washer-dryer
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Precautions and tips, 7
General safety
Disposal
Opening the porthole door manually
Description of the washer-dryer, 8-9
Control panel
Display
How to run a wash cycle or a drying cycle, 10
Wash cycles and functions, 11
Table of wash cycles
Wash functions
Detergents and laundry, 12
Detergent dispenser drawer
Preparing the laundry
Special wash cycles
Load balancing system
Troubleshooting, 13-14
Assistance, 15-16
SWD 107617
Instructions for use
WASHER-DRYER
English,1
GB
2
GB
Installation
inclination, measured according to the worktop,
must not exceed 2°.
Levelling your appliance correctly will provide
it with stability and avoid any vibrations, noise
and shifting during operation. If it is placed on
a fitted or loose carpet, adjust the feet in such
a way as to allow enough room for ventilation
beneath the washing machine.
Electric and water connections
Connecting the water inlet hose
1. Connect the sup-
ply pipe to the water
mains using a gas 3/4
attachment, fitting the
rubber gasket and
the filter supplied with
the appliance and
ensuring that they are
fimly tightened to the
taps. The water supply
marked must be connected to the cold water C
tap; the pipe marked H must be connected
to the hot water tap (max. temperature 60°C).
Both pipes may be connected to the cold water
tap using the special connection with multiple Y
attachments, supplied with the appliance (see
figure). Before making the connection, allow the
water to run freely until it is perfectly clear.
2. Connect the inlet
hose to the machine
by screwing it onto
the cold water inlet of
the appliance, which
is situated on the top
right-hand side of the
rear part of the ap-
pliance . (see figure)
3. Make sure there are no kinks or bends in
the hose.
! The water pressure at the tap must be within
the values indicated in the Technical details
table (on the page 5).
! If the water inlet hose is not long enough,
contact a specialist store or an authorised
serviceman.
! Ensure that the supply taps are allowing wa-
ter through. Old taps may seize in the closed
position and thus prevent water reaching the
machine.
! Never use second-hand or old inlet hoses;
use the products supplied with the machine.
! Keep this instruction manual in a safe place
for future reference. Should the appliance be
sold, transferred or moved, make sure the
instruction manual accompanies the washing
machine to inform the new owner as to its
operation and features.
! Read these instructions carefully: they contain
vital information on installation, use and safety.
Unpacking and levelling
Unpacking
! This is a separate
part of the polystyre-
ne base and should
be removed with the
base.
! IMPORTANT check
when unpacking
your machine.
1. Unpack the washing machine.
2. Check whether the washing machine has
been damaged during transport. If this is the
case, do not install it and contact your retailer.
3. Remove the 4
protective screws and
the rubber bush with
the respective spacer,
situated on the rear of
the appliance (see also
the installation leaflet).
4. Seal the gaps
using the plastic plugs
provided.
5. Keep all the parts:
you will need them again if the washing machine
needs to be moved to another location.
! Packaging materials are not children’s toys.
Levelling
Your machine may make a considerable
amount of noise if the two front feet have not
been adjusted correctly.
1. Install the washing
machine on a flat sturdy
floor, without resting it up
against walls, cabinets or
anything else.
2. If the floor is not per-
fectly level, compensate
for any unevenness by
tightening or loosening
the adjustable front feet
(see figure); the angle of

Produkt Specifikationer

Mærke: Hotpoint Ariston
Kategori: Vaskemaskine
Model: SWD107617C

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint Ariston SWD107617C stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vaskemaskine Hotpoint Ariston Manualer

Hotpoint Ariston

Hotpoint Ariston ARXXD 149 Manual

29 September 2024
Hotpoint Ariston

Hotpoint Ariston Aqualtis AQD1170D 697 I Manual

19 September 2024
Hotpoint Ariston

Hotpoint Ariston WMYL6551 Manual

16 September 2024
Hotpoint Ariston

Hotpoint Ariston WMEF 7225 Manual

14 September 2024
Hotpoint Ariston

Hotpoint Ariston Aml 125 Manual

12 September 2024
Hotpoint Ariston

Hotpoint Ariston Aqualtis AQXXF 169 Manual

8 September 2024
Hotpoint Ariston

Hotpoint Ariston AQ86F 29 IT Manual

5 September 2024
Hotpoint Ariston

Hotpoint Ariston WMF 702 EU Manual

28 August 2024
Hotpoint Ariston

Hotpoint Ariston ac 128 l Manual

22 August 2024
Hotpoint Ariston

Hotpoint Ariston aq 8 l 49 u Manual

20 August 2024

Vaskemaskine Manualer

Nyeste Vaskemaskine Manualer

CHiQ

CHiQ WTL63FDG Manual

15 Juni 2025
CHiQ

CHiQ WTL79FDB Manual

14 Juni 2025
Bosch

Bosch WGG254ZPSN Manual

14 Juni 2025
Haier

Haier HWF12PXW1 Manual

14 Juni 2025
Smeg

Smeg WNP04SEAIN1 Manual

14 Juni 2025
IFB

IFB TL111RB2SN Manual

13 Juni 2025
CHiQ

CHiQ WTL78FDG Manual

13 Juni 2025
IFB

IFB TL700CB1SWID Manual

13 Juni 2025
Smeg

Smeg WNP84SEAIN1 Manual

13 Juni 2025
IFB

IFB TL801OG2ID Manual

13 Juni 2025