Hotpoint AQD970D 49 EU / B Manual

Hotpoint Vaskemaskine AQD970D 49 EU / B

Læs gratis den danske manual til Hotpoint AQD970D 49 EU / B (84 sider) i kategorien Vaskemaskine. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Hotpoint AQD970D 49 EU / B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/84

English,1

! This symbol reminds you to read this instruction manual.

Contents

Installation, 2-3

Unpacking and levelling

Connecting the electricity and water supplies

Technical data

Description of the machine, 4-5

Touch control panel

How to run a wash cycle or a drying

cycle, 6

Wash cycles and options, 7

Table of wash cycles

Wash options

Detergents and laundry, 8

Detergent

Preparing the laundry

Washing recommendations

Load balancing system

Precautions and advice, 9

General safety

Disposal

Opening the porthole door manually

Care and maintenance, 10

Cutting off the water and electricity supplies

Cleaning the machine

Cleaning the detergent dispenser drawer

Caring for your appliance drum

Cleaning the pump

Checking the water inlet hose

Trouble shooting, 11

Assistance, 12

WASHER-DRYER

AQUALTIS

AQD970D 49

Instructions for

installation and use

Polski,13

Česky,37

Slovensky,25

Magyar,49 Română,61

Українська,73

Installation

! This instruction manual should be kept in a safe place for

future reference. If the Washer-dryer is sold, given away or

moved, please ensure the manual is kept with the machine,

so that the new owner may benefit from the advice

contained within it.

! Read these instructions carefully: they contain vital

information relating to the safe installation and operation of

the appliance.

! Inside the pack containing this manual, you will also find

the guarantee and all the details necessary for installation.

Unpacking and levelling

Unpacking

1. Once you have removed all the packaging from the

Washer-dryer, make sure it has not been damaged during

transportation.

If it has been damaged, contact the retailer and do not

proceed any further with the installation process.

2. Remove the 4 protective

screws (used during

transportation) and the

corresponding spacer,

located on the rear part of

the appliance ( ). see figure

3. Close off the holes using the plastic plugs supplied in the

pack.

4. Keep all the parts in a safe place; they will be needed

again if the Washer-dryer is moved to another location, to

prevent the inside of the appliance being damaged.

! Packaging materials should not be used as toys for

children.

Levelling

1. Place the Washer-dryer on a flat sturdy floor, without

resting it up against walls or cabinets.

2. If the floor is uneven, the

front feet of the machine

may be adjusted until

it reaches a horizontal

position (the angle of

inclination must not exceed

2 degrees).

! If the appliance is levelled correctly, it will be more stable

and much less likely to cause vibrations and noise while it

is operating, particularly during the spin cycle.

! If it is placed on carpet or a rug, adjust the feet in such a

way as to allow a sufficient ventilation space underneath

the Washer-dryer.

Connecting the electricity and water

supplies

Connecting the water inlet hose

! Before connecting the inlet hose to the water supply, run

the water until it is perfectly clear.

1. Connect the inlet hose

to the machine by screwing

it onto the cold water inlet

of the appliance, which is

situated on the top right-

hand side of the rear part of

the appliance . (see figure)

2. Connect the inlet hose

by screwing it to a cold

water tap using a 3/4 gas

threaded connection (see

figure).

3. Make sure that the hose is not folded over or bent.

! The water pressure at the tap must fall within the values

indicated in the Technical data table (see next page).

! If the inlet hose is not long enough, contact a specialised

shop or an authorised technician.

! Never use second-hand or old inlet hoses; use the

products supplied with the machine.

Produkt Specifikationer

Mærke:	Hotpoint
Kategori:	Vaskemaskine
Model:	AQD970D 49 EU / B
Bredde:	595 mm
Dybde:	616 mm
Højde:	850 mm
Produktfarve:	Hvid
Indbygget skærm:	Ja
Energieffektivitetsklasse (gammel):	A
Placering af apparat:	Fritstående
Ilægningstype:	Front-læsning
Maksimal centrifugeringshastighed:	1400 rpm
Energiforbrug ved vask:	- kWh
Spin-tørre klasse:	A
Vaskeklasse:	A
Tørreevne:	7 kg
Vaske kapacitet:	9 kg
Energiforbrug pr. vask og tørring:	- kWh
Vandforbrug pr. vask og tørring:	- L