Hotpoint FFU4D X 1 Manual

Hotpoint Køleskab FFU4D X 1

Læs gratis den danske manual til Hotpoint FFU4D X 1 (16 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Hotpoint FFU4D X 1, eller vil du spørge andre brugere om produktet?

Side 1/16
LARDER FRIDGE - MODELS RLA34,RLA36,RLM34,RLM36
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
To ensure that your fridge runs reliably and efficiently follow these steps.
Choose a location for your
fridge, away from any
heat sources and
allow adequate
ventilation - 30mm
(11/4inch) gap above.
Level the fridge by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.
Plug in and switch on.
Allow the fridge to cool
before placing food
inside.
All food in the fridge
should be covered.
Move the fridge into
position, using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.
Before plugging in and
switching on, leave the
fridge in its final
location for at least 15
minutes to allow it to
settle.
Your fridge is now
working.
If after 24 hours your
fridge is not operating as
you want, refer to the
Troubleshooting section.
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
STEP 1 STEP 2
STEP 3 STEP 4
STEP 5 STEP 6
SAFETY &
INSTALLATION CONTROLS USEFUL ADVICE
CLEANING &
MAINTENANCE
SERVICE &
GUARANTEE
TROUBLESHOOTING


Produkt Specifikationer

Mærke: Hotpoint
Kategori: Køleskab
Model: FFU4D X 1

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint FFU4D X 1 stil et spørgsmål nedenfor, og andre brugere vil svare dig