Hotpoint SH6 A2Q XRD Manual

Hotpoint Køleskab SH6 A2Q XRD

Læs gratis den danske manual til Hotpoint SH6 A2Q XRD (15 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Hotpoint SH6 A2Q XRD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

1. Fan*

2. Electronic control panel / light unit

3. Bottle rack*

4. Sensor cover

5. Area shelves

6. Rating plate with commercial name

7. Fruits and vegetables crisper*

8. Door reversibility kit

9. Bottle holder*

10. Door trays

11. Door seal

* Available on selected models

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the

operation automatically. After starting the appliance, wait

at least 4-6 hours before placing food into the appliance.

When the appliance is connected to the power supply,

the display lights up and all the icons appear on the

display for approximately 1 second. The default (factory)

values of the fridge compartment settings light-up.

HOW TO REVERSE THE DOOR SWING

- see enclosed Instructions for Use (Version_2)

Is recommended to reverse door swing by two persons.

There is not foreseen door reversibility for:

- models with integrated handle

- models with glass panel on the door.

Specifications, technical data and images may vary

from model to model

To receive the assistance call the number shown on

the warranty booklet or follow the instruction on the

web site www.hotpoint.eu

811

Read the Instructions for Use carefully before

using the appliance.

QUICK START GUIDE

ALARMS TABLE

ALARM TYPE Signal Cause Cure

Door open alarm Refrigerator Light blinks The door has remained open for more than 5 minutes. Close the door

Door open alarm Refrigerator Light OFF The door has remained open for more than 8 minutes. Close the door

Malfunction Any temperature indicators blinks Product malfunction. Contact the After-sales Service

FAN

The fan improves temperature distribution inside the refrigerator compartment,

allowing better preservation of stored food.

By default, the fan is switched on.

It is advisable to keep the fan switched on when the ambient air temperature is above

27 - 28°C or if you notice drops of water on the glass shelves or in sever humidity

conditions.

To turn off the fan press the button of fan.

Please note that when the fan is switched on it will not continuously work. The fan

will start/stop working depending on the temperature and/or humidity level inside the

fridge.

It is therefore absolutely normal if the fan does not move even if the fan is switched on.

on - o

TEMPERATURE button

Press the Temperature button on the control panel to adjust the temperature from the

warmest through the lower to the coldest level.

Pressing the Temperature button, the temperature setting will change cyclically.

At first plug-in of appliance temperature setpoint is present at medium position

(factory setting).

Following table shows temperature setpoints:

Note: Displayed set points correspond to the average temperature

throughout the whole refrigerator.

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses LEDs

light, allowing a better lightning as well as a very low energy

consumption.

If the LED light system does not work, please contact the

Service to replace it.

Important: The refrigerator compartment light switches on

when the refrigerator door is opened. If the door is kept open for

more then 8 minutes the light will be automatically switched off.

Indicator LEDs to display the current temperature

setpoint or the Fast Cooling function.

FAST COOLING function

The use of the Fast Cooling function is recommended:

- to increase the cooling speed of the refrigerator

compartment when placing a very high quantity of food

within it,

To activate the Fast Cooling function, press and hold

for 3 seconds the Temperature button on the control

panel till all the 3 LEDs will turn on.

The function is automatically deactivated after 6 hours

and return to previous selected set point. The function

can be manually deactivated by pressing and holding for

3 seconds the Temperature button on the control panel.

TEMPERATURE button

FAST COOLING button

Led ON Led OFF

5892140900

IT ES PT BG CS FR HU KK PL RO RU SK UK

IT DE

Produkt Specifikationer

Mærke:	Hotpoint
Kategori:	Køleskab
Model:	SH6 A2Q XRD
Justerbar termostat:	Ja
Vekselstrømsindgangsspænding:	220-240 V
Vekselstrømsindgangsfrekvens:	50 Hz
Bredde:	595 mm
Dybde:	645 mm
Højde:	1670 mm
Vægt:	52000 g
Produktfarve:	Rustfrit stål
Lampe type:	LED
Indbygget skærm:	Ingen
Strøm:	1.5 A
Pakkevægt:	53889 g
Pakkedybde:	725 mm
Pakkebredde:	640 mm
Pakkehøjde:	1735 mm
Årligt energiforbrug:	113 kWh
Placering af apparat:	Fritstående
Dørhængsel:	Højre
Tilsluttet belastning:	100 W
Støjniveau:	38 dB
Understøttede scanningstilstande:	1305 mm
Energieffektivitetsskala:	A til G
Støjemissionsklasse:	C
Energieffektivitetsklasse:	E
Vendbare døre:	Ja
Klimaklasse:	SN-T
Frostfri system:	Ingen
Multi-luftgennemstrømningssystem:	Ingen
Køleskab antal hylder/kurve:	5
Antal grøntsagsskuffer:	1
Æggebakke:	Ja
Køleskabsdøre:	4
Køleskab, netto rumindhold:	322 L
Køleskab indvendigt lys:	Ja
Hylder, materiale:	Glas
Flaskeholder:	Ja
Åben dør alarm:	Ingen
Super Cool funktion:	Ja
Frisk zone, aflukke:	Ingen
Feriefunktion:	Ingen
Automatisk afrimning (køleskab):	Ingen
Antal kompressorer:	1
Vandbeholder:	Ja
Antal døre:	1 dør(e)
Kølesystem:	Ventileret
Ventilation:	Ja
Forsænket håndtag:	Ingen
Antibakterielt rum:	Ingen
Garantiperiode:	2 År