Hotpoint SWMD9437 Manual

Hotpoint Vaskemaskine SWMD9437

Læs gratis den danske manual til Hotpoint SWMD9437 (16 sider) i kategorien Vaskemaskine. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Hotpoint SWMD9437, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

English,1

Contents

Installation, 2-3-4-5

Unpacking and levelling

Connecting the electricity and water supplies

The first wash cycle

Technical data

Care and maintenance, 6

Cutting off the water or electricity supply

Cleaning the washing machine

Cleaning the detergent dispenser drawer

Caring for the door and drum of your appliance

Cleaning the pump

Checking the water inlet hose

Precautions and tips, 7

General safety

Disposal

Opening the porthole door manually

Description of the washing machine, 8-9

Control panel

Display

Running a wash cycle, 10

Wash cycles and functions, 11

Table of wash cycles

Wash functions

Detergents and laundry, 12

Detergent dispenser drawer

Preparing the laundry

Special wash cycles

Load balancing system

Troubleshooting, 13-14

Assistance, 15-16

SWMD 9437

Instructions for use

WASHING MACHINE

Installation

ning the adjustable front feet the (see figure);

angle of inclination, measured according to the

worktop, must not exceed 2°.

Levelling your appliance correctly will provide

it with stability and avoid any vibrations, noise

and shifting during operation. If it is placed on

a fitted or loose carpet, adjust the feet in such

a way as to allow enough room for ventilation

beneath the washing machine.

Electric and water connections

Connecting the water inlet hose

1. Connect the supply

pipe by screwing it to a

cold water tap using a

3/4 gas threaded con-

nection (see figure).

Before performing the

connection, allow the

water to run freely un-

til it is perfectly clear.

2. Connect the other

end of the water inlet

hose to the washing

machine,

screwing it onto the

appliance’s cold water

inlet, situated on the

top right-hand side on

the rear of the applian-

ce (see figure).

3. Make sure there are no kinks or bends in the

hose.

! The water pressure at the tap must be within

the values indicated in the Technical details

table (on the page 5).

! If the water inlet hose is not long enough,

contact a specialist store or an authorised

serviceman.

! Ensure that the supply taps are allowing wa-

ter through. Old taps may seize in the closed

position and thus prevent water reaching the

machine.

! Never use second-hand or old inlet hoses;

use the products supplied with the machine.

! Keep this instruction manual in a safe place

for future reference. Should the appliance be

sold, transferred or moved, make sure the

instruction manual accompanies the washing

machine to inform the new owner as to its

operation and features.

! Read these instructions carefully: they contain

vital information on installation, use and safety.

Unpacking and levelling

Unpacking

! This is a separate

part of the polystyre-

ne base and should

be removed with the

base.

! IMPORTANT check

when unpacking

your machine.

1. Unpack the washing machine.

2. Check whether the washing machine has

been damaged during transport. If this is the

case, do not install it and contact your retailer.

3. Remove the 4 pro-

tective screws and

the rubber bush with

the respective spacer,

situated on the rear of

the appliance (see also

the installation leaflet).

4. Seal the gaps using

the plastic plugs provi-

ded.

5. Keep all the parts:

you will need them again if the washing machi-

ne needs to be moved to another location.

! Packaging materials are not children’s toys.

Levelling

Your machine may make a considerable

amount of noise if the two front feet have not

been adjusted correctly.

1. Install the washing

machine on a flat sturdy

floor, without resting it

up against walls, cabi-

nets or anything else.

2. If the floor is not per-

fectly level, compensa-

te for any unevenness

by tightening or loose-

Produkt Specifikationer

Mærke:	Hotpoint
Kategori:	Vaskemaskine
Model:	SWMD9437

Har du brug for hjælp?

Hvis du har brug for hjælp til Hotpoint SWMD9437 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vaskemaskine Hotpoint Manualer

Hotpoint H8 99AD GPOWER SPT Manual

8 September 2025

Hotpoint NBT 1048 WD A Manual

3 September 2025

Hotpoint NS1069CWKEUN Manual

3 September 2025

Hotpoint AQS73D28S EU/B N Manual

3 September 2025

Hotpoint NLCD 948 BS A EU Manual

12 August 2025

Hotpoint NWS 7469 W EU Manual

12 August 2025

Hotpoint HDA1200GWW Manual

2 August 2025

Hotpoint BI WMHG 71483 EU N Manual

2 August 2025

Hotpoint NBT 1146 WSA IT Manual

1 August 2025

Hotpoint NFR69W IT Manual

1 August 2025

Vaskemaskine Manualer

Nyeste Vaskemaskine Manualer

Bosch Serie | 6 WAT324L7SN Manual

13 September 2025

Electrolux EWP 106300 W Manual

13 September 2025

Samsung WW95DG6U85 Manual

13 September 2025

Samsung WW11DB7B34 Manual

13 September 2025

Aspes AL8201DD Manual

13 September 2025

IPSO HF185 Manual

13 September 2025

Philco PLDI 147 A King Manual

13 September 2025

Samsung WW90DB8U95 Manual

12 September 2025

Siemens WI14S440 Manual

12 September 2025

Vivax WFL-120712CD Manual

12 September 2025