Husqvarna-Viking Metal Hoop 180-130mm Manual

Husqvarna-Viking Symaskine Metal Hoop 180-130mm

Læs gratis den danske manual til Husqvarna-Viking Metal Hoop 180-130mm (4 sider) i kategorien Symaskine. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Husqvarna-Viking Metal Hoop 180-130mm, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

User Instructions

METAL HOOP 180x130mm – User Instructions

Included with your is a template and four Metal Hoop 180x130mm

magnets.

The hoop has a flocked surface to prevent the fabric from sliding. There

are raised markings on the hoop indicating the center of the embroidery

area. When positioning the fabric in the hoop, you can easily feel the

raised markings (ill. A) through the fabric with your finger tips.

The template has both inch and cm measurements. There are also slits in

the template through which you can make markings on the hoop with a

water soluble marking pen (ill. B). Use the lines as a guide when lining

up your project/fabric to be embroidered.

The magnets are used to fix fabric to the hoop or to keep excess fabric

away from the embroidery area. Place the magnets evenly spaced on the

hoop for best embroidery result.

Note: There is an extra set of four magnets avialable as an optional

accessory, (#620132696, ). They can be INSPIRA™ Magnet Set 4 pcs

used to fix the fabric more securely to the hoop when not using adhesive

stabilizer.

To remove the magnets from the hoop, pinch around the magnet and lift

it upwards. You can also turn the magnet towards the edge of the hoop.

Lift it off when a part of the magnet is outside the hoop.

When you are not using the magnets we recommend that you store

them on top of each other as illustrated to the right (ill. C). If you leave

the magnets on the hoop when they are not used, they can damage the

flocked surface of the hoop.

Some fabrics are more difficult to hoop than others or should not be hooped at all, since hooping can damage

the fabric. Thick and coarse fabrics can be difficult to hoop but also thin and glossy fabrics. Hooping ready-to-

wear garments is difficult or impossible due to seams, narrow areas or buttons/rivets. When using the Metal Hoop

180x130mm hooping won't be a problem!

When you want to embroider on quilts or other projects where you do not want residuals from stabilizer on the back

side, the is perfect! Embroider without stabilizer. Metal Hoop 180x130mm

Embroidering several designs after each other or doing endless embroideries is easy, just remove the magnets and

move the fabric. Ready to embroider the next design in no time!

Produkt Specifikationer

Mærke:	Husqvarna-Viking
Kategori:	Symaskine
Model:	Metal Hoop 180-130mm

Har du brug for hjælp?

Hvis du har brug for hjælp til Husqvarna-Viking Metal Hoop 180-130mm stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Symaskine Husqvarna-Viking Manualer

Husqvarna-Viking Designer Topaz 50 Manual

7 August 2025

Husqvarna-Viking H-Class 600E Manual

7 August 2025

Husqvarna-Viking Designer Topaz 40 Manual

7 August 2025

Husqvarna-Viking Designer Epic 3 Manual

7 August 2025

Husqvarna-Viking Sapphire 875 Quilt Manual

7 August 2025

Husqvarna-Viking Sapphire 835 Manual

7 August 2025

Husqvarna-Viking Designer Jade 35 Manual

7 August 2025

Husqvarna-Viking Huskylock s21 Manual

6 August 2025

Husqvarna-Viking Designer Ruby deLuxe Manual

6 August 2025

Husqvarna-Viking Designer Diamond deLuxe Manual

6 August 2025

Symaskine Manualer

Nyeste Symaskine Manualer

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

Juki MS-1261A-DWS Manual

9 August 2025