Intergas HRE 36/30 Manual

Intergas Centralvarme kedel HRE 36/30

Læs gratis den danske manual til Intergas HRE 36/30 (4 sider) i kategorien Centralvarme kedel. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Intergas HRE 36/30, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Combi Compact

HRE 24/18

HRE 28/24

HRE 36/30

HRE 36/40

Operating Instructions

Installation of the appliance may only be carried out by an installer/competent person.

Please ask your installer to instruct you on how to fill and bleed the appliance and the

installation and on their operation. Strictly abide by all the instructions and warnings.

Always use the appliance in accordance with the Operating Instructions. It is forbidden to

interfere with a sealed component.

CONTENTS

1 Operation of the appliance 2

1.1 Operation of the central heating ................................................................. 2

1.2 Operation of domestic hot water supply ..................................................... 2

2 Operation and display read- 2 out

2.1 Operating mode on the service display 3 ......................................................

2.2 Changing the settings of the various functions ........................................... 3

3 Start- 3 up

4 Faults 3

5 Filling and bleeding appliance and installation 4

5.1 Central heating system ............................................................................... 4

5.2 Domestic hot water supply .......................................................................... 4

5.3 Frost protection ........................................................................................... 4

6 Maintenance 4

Intergas Heating Ltd is a licensed member of the Benchmark Scheme which aims to improve the standards of installation and commissioning of domestic

heating and hot water systems in the UK and to encourage regular servicing to optimise safety, efficiency and performance. Benchmark is managed and

promoted by the Heating and Hotwater Industry Council. For more information visit www.centralheating.co.uk.

Please ensure that the installer has fully completed the Benchmark Checklist on the inside back pages of the installation instructions supplied with the

product and that you have signed it to say that you have received a full and clear explanation of its operation. The installer is legally required to complete a

commissioning checklist as a means of complying with the appropriate Building Regulations (England and Wales).

All Installations must be notified to Local Aerea Building Control either directly or through a Competent Persons Scheme. A Building Regulations

Compliance Certificate will then be issued to the customer who should, on receipt, write the Notification Number on the Benchmark Checklist.

This product should be serviced regularly to optimise its safety, efficiency and performance. The service engineer should complete the relevant Service

Record on the Benchmark Checklist after each service. The Benchmark cheklist may be required in the event of any warrranty work and as supporting

documentation relating to home improvements in the optional documents section of the Home Information Pack.

1 OPERATION OF THE APPLIANCE

The purpose of the Intergas Combi Compact HRE wall mounted gas fired boiler is to heat water and to supply it to the central heating

(CH) system and the domestic hot water (DHW) taps. The heat exchanger comprises of two separate systems for central heating and

DHW. The appliance is fitted with a modulating control. This means that the power is adjusted in line with the required heat. The boiler

controller responds to each call for heat from the heating or the DHW system by igniting the burner and monitoring the flame.

1.1 Operation of the central heating

The call for heat arises as a result of the room temperature being lower than the temperature set on the room thermostat. If at that time

the appliance does not have a call for DHW, the appliance comes on in central heating mode. The central heating temperature control

modulates on the basis of the set central heating supply temperature. This means that when the desired central heating supply

temperature is approached the appliance adjusts the power. The pump for the central heating has a post purge period of 1 minute. The

post purge period may be changed if desired. The pump runs automatically for 10 seconds once every 24 hours to prevent blocki . ng

1.2 Operation of domestic hot water supply

The DHW system is started automatically as soon as more than 2 litres of water per minute are drawn. During delivery of hot tap water

no heat is supplied by the appliance to the central heating system.

For purposes of fast delivery of hot tap water a DHW comfort function has been installed in the controller. This function maintains the

temperature of the heat exchanger. The DHW comfort function has the following settings:

On: ( unction is turned on continuously. In this mode the heat exchanger will be kept on LED on) The appliance’s DHW comfort f

temperature to assure instant delivery of hot water.

Eco: ( of use of hot tap LED on) The appliance’s DHW comfort function is an intelligent system. The appliance will adapt to the pattern

water. As a result, the temperature of the heat exchanger will only be maintained in periods during which domestic hot water was drawn

on previous days.

Off: (Both LEDs off) The temperature of the heat exchanger is not maintained, as a result of which the delivery of hot tap water takes a

little time. If there is no need for rapid delivery of hot tap water, the DHW comfort function can be switched off.

2 OPERATION AND DISPLAY READ-OUT

Read-out

Operation

On / off

On / Off button

CH operation or setting maximum CH temperature

DHW / CH button, for setting desired temperature

DHW operation or setting DHW temperature

- button

Desired temperature of CH or DHW in °C / CH water pressure (bar) / Fault code/ Time

+ button

Clock “on” CH enabled

Clock function setting

Clock “off” CH disabled

DHW comfort function off / eco / on

DHW comfort function eco

Service button

DHW comfort function on (continuous)

Reset button

Operating code

Produkt Specifikationer

Mærke:	Intergas
Kategori:	Centralvarme kedel
Model:	HRE 36/30

Har du brug for hjælp?

Hvis du har brug for hjælp til Intergas HRE 36/30 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Centralvarme kedel Intergas Manualer

Intergas HRE 24-18 Manual

13 Januar 2025

Intergas HRE 36-30 Manual

13 Januar 2025

Intergas HRE 28-24 Manual

13 Januar 2025

Intergas Combi Compact ECO RF 36 Manual

18 September 2024

Intergas Kompakt Solo HRE 18 Manual

18 September 2024

Intergas Kombi Kompakt HRE 24/18 Manual

5 August 2024

Intergas Kombi Kompakt HRE 36/48 Manual

3 August 2024

Intergas HReco 30 Manual

22 Juli 2024

Intergas Kompakt Solo HRE 24 Manual

19 Juli 2024

Intergas HRE SOLO 12 Manual

19 Juli 2024

Centralvarme kedel Manualer

Nyeste Centralvarme kedel Manualer

Buderus Logamax plus GB192 i Manual

13 Januar 2025

Baxi Neta-tec Combi 28 GA Manual

11 Januar 2025

Baxi Platinum Compact Manual

28 December 2024

Baxi Platinum iPlus Manual

28 December 2024

Junkers Classicomfort 23A Manual

14 Oktober 2024

Buderus Logano G135 Manual

9 Oktober 2024

Vaillant thermoCOMPACT/3 Manual

8 Oktober 2024

Buderus Logano plus GB135 Manual

6 Oktober 2024

Ferroli MegaLux A 131 Manual

5 Oktober 2024

Buderus Logano Plus GB302 Manual

4 Oktober 2024