Ixxat CAN@net NT 100 Manual

Ixxat Ikke kategoriseret CAN@net NT 100

Læs gratis den danske manual til Ixxat CAN@net NT 100 (36 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om Ixxat CAN@net NT 100, eller vil du spørge andre brugere om produktet?

Side 1/36
V1.0
www.ixxat.com
Page 1 of 3
The Ixxat CAN@net NT 100 with one CAN channel is a three-in-
one multifunctional talent in the CAN world and a very reliable
workhorse for CAN applications. It can act as a gateway between
CAN and Ethernet systems, providing easy, flexible access to the
CAN system via LAN or over the Internet.
exchange of CAN messages between CAN systems over long
distances via TCP/IP, using existing Ethernet infrastructures. The
segmentation of CAN systems also increases the reliability and
failure safety of the entire system.
Messages can be processed, filtered and mapped in the
gateway. In addition, depending on the received messages and
the status of the device or CAN bus, various actions and
responses can be automatically performed. The MQTT protocol
available in CAN@net NT 100 enables the information to be
transmitted directly to the cloud.
Galvanic isolation reliably enhances the protection of the device
against damage to electronics caused by voltage peaks.
FEATURES AND BENEFITS
ORDER NUMBER 1.01.0332.10000
CAN channels (high speed) 1
Easy coupling of CAN systems and devices
Allows system expansion and tree/star topologies
Cost savings due to simple wiring
Increased system reliability
1 x CAN channel
Line protection by galvanic isolation
Bridging of large distances with CAN-to-Ethernet-to-CAN
Easy remote system access
Powerful filter, ID translation, data mapping and multiplexing
functionality
Additional programming of any kind of action rules using LUA
MQTT support for easy cloud connection
Powerful programming interface for Windows (VCI) as well as for Linux
(socketCAN or ECI), QNX, RTX, INtime and VxWorks (ECI)
DATASHEET
CAN@net NT 100
V1.0
www.ixxat.com
Page 2 of 3
ORDER NUMBER 1.01.0332.10000
CAN bus interface 1 x D-Sub 9, CAN high speed according to ISO 11898-2:2016
CAN bit rates 5 kbit/s to 1000 kbit/s
CAN FD bit rates -
CAN bus termination resistors None
Galvanic isolation 1 kV DC for 1 sec.
CAN propagation delay (typical) Local CAN Bridge: 25-50 µs depending on configuration settings and CAN
load. CAN-Ethernet-CAN Bridge: 4-6 ms
Messages per second (send/receive) 30000-40000 msg/s in Bridge mode
USB connector Mini-USB 2.0 port, high-speed
LAN bit rates 10/100 Mbit/s
Ethernet connector RJ45, twisted pair
Ethernet interfaces 1
Power supply 9 V to 36 V DC with overvoltage and polarity protection
Power consumption at 24 V Typically 110 mA
Power consumption at 12 V Typically 230 mA
Dimensions 114.5 x 99 x 22.5 mm
Weight Approx. 150 g
Operating temperature -40°C to +85°C
Storage temperature -40°C to +85°C
Protection class IP20
Relative humidity 10 to 95 %, non-condensing
Certification CE, FCC, UL, UKCA
Housing material Polyamide
LED Transmit and defective segment (two duo LEDs, one for each segment).
Power, Status, User, Ethernet (each one LED). In the Bridge mode the
User LED can be configured with user defined settings via Action Rules.
Operating Systems Windows 11, Windows 10 (32/64), Windows 8 (32/64), Windows 7
(32/64), Linux
CERTIFICATES
ACCESSORIES ORDER NUMBER
Termination adapter for CAN/CAN FD (D-Sub male to
female)
1.04.0075.03000
CAN cable 2.0 m (D-Sub male to female) 1.04.0076.00180
CAN Y cable 0.22 m 1.04.0076.00001
CAN Y cable 2.1 m 1.04.0076.00002


Produkt Specifikationer

Mærke: Ixxat
Kategori: Ikke kategoriseret
Model: CAN@net NT 100

Har du brug for hjælp?

Hvis du har brug for hjælp til Ixxat CAN@net NT 100 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Ixxat Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer