JANDY SFHT3472 Manual

JANDY Vandfilter SFHT3472

Læs gratis den danske manual til JANDY SFHT3472 (72 sider) i kategorien Vandfilter. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om JANDY SFHT3472, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/72

Installation and Operation Manual

Manuel d’installation et d’utilisation

Manual de instalación y operación

Commercial Horizontal Sand Filter

Models: SFHT3461 SFHT3472

SFHT3484 SFHT4272

SFHT4284 SFHT4296

WARNING

FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualiﬁed in pool equipment by the jurisdiction in which the product will be installed

where such state or local requirements exist. The maintainer must be a professional with sufﬁcient experience in pool equipment installation and maintenance so that all of the instructions

in this manual can be followed exactly. Before installing this product, read and follow all warning notices and instructions that accompany this product. Failure to follow warning notices

and instructions may result in property damage, personal injury, or death. Improper installation and/or operation may void the warranty.

Improper installation and/or operation can create unwanted electrical hazard which may cause serious injury, property damage, or death.

ATTENTION INSTALLER – This manual contains important information about the installation, operation and safe use of this product. This information should be given

to the owner/operator of this equipment.

Page 2

ENGLISH Jandy® Commercial Horizontal Sand Filter | Installation & Operation Manual

Table of Contents

EQUIPMENT INFORMATION RECORD

DATE OF INSTALLATION _______________________________________________________________________________

INSTALLER INFORMATION _____________________________________________________________________________

INITIAL PRESSURE GAUGE READING (WITH CLEAR FILTER) ____________________________________________

NOTES _______________________________________________________________________________________________

______________________________________________________________________________________________

Section 1. Important Safety Instructions 3 .........

1.1 Safety Instructions 3 .........................................

Section 2. Getting Started 5 .................................

2.1 Package Contents 5 ..........................................

2.2 Purchased Separately 5 ....................................

2.3 Inspection .......................................................5

2.4 Receiving a Shipment 5 ....................................

2.5 Damaged Shipment 5 .......................................

2.6 Speciﬁcations and Dimensions 6 ......................

2.7 Equipment Location 8 .......................................

Section 3. Installation 9 ........................................

3.1 Remove Components From

Shipping Crates/Cartons 9 ................................

3.2 Position the Tank 9 ............................................

3.3 Assembly of Grooved Connections (clamps not

included) 10 .......................................................

3.4 Assembly of Flanged Connections (ﬂanges not

included) 10 .......................................................

3.5 Weld Solvent PVC Pipe and Fittings 10 ............

3.6 Remove the Access Hatch 11 ...........................

3.7 Install Pressure Gauges 11 ...............................

3.8 Install Valve Manifold and Supports 11 .............

Section 4. Start-Up and Operation 12 .................

4.1 Install Media 12 .................................................

4.2 Check Freeboard 12 ..........................................

4.3 Reinstall Access Hatch 13 ................................

4.4 Initial Backwash Cycle 13 .................................

4.5 Recirculating Pump Requirements 14 ...............

4.6 Initial Backwash Requirement 14 ......................

4.7 Start the Filter 14 ...............................................

Section 5. Maintenance 14 ...................................

5.1 General Maintenance 15 ...................................

5.2 Daily Maintenance 15 ........................................

5.3 Annual Maintenance 15 .....................................

5.4 Backwashing ................................................15

5.5 Inspection and Service 16 .................................

5.6 Winterizing .................................................... 16

5.7 Head Loss Curve for #20 Silica Sand 17 ..........

5.8 Differential Pressure 17 .....................................

Section 6. Troubleshooting 17 .............................

Section 7. Product Speciﬁcations and

Replacement Parts 17 ........................

7.1 Access Hatch 18 ...............................................

7.2 External Air Vent 19 ...........................................

7.3 Pressure Gauge Panel Assembly 20 .................

7.5 Media Drain 22 ..................................................

7.6 Internal Assemblies 23 ......................................

Produkt Specifikationer

Mærke:	JANDY
Kategori:	Vandfilter
Model:	SFHT3472

Har du brug for hjælp?

Hvis du har brug for hjælp til JANDY SFHT3472 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vandfilter JANDY Manualer

7 Juli 2025

7 Juli 2025

7 Juli 2025

6 Juli 2025

6 Juli 2025

6 Juli 2025

6 Juli 2025

29 Marts 2025

19 December 2024

19 December 2024

Vandfilter Manualer

Nyeste Vandfilter Manualer

Hendi 231234 Manual

10 August 2025

Breville the Chill Control BWC200 Manual

9 August 2025

Philips AWP2941 Manual

6 August 2025

6 August 2025

5 August 2025

5 August 2025

4 August 2025

Bestway Flowclear 58774 Manual

4 August 2025

Haier HP16 Manual

27 Juli 2025

Haier HU612-4G Manual

27 Juli 2025