JVC XL-PG300B Manual

JVC CD-afspiller/optager XL-PG300B

Læs gratis den danske manual til JVC XL-PG300B (4 sider) i kategorien CD-afspiller/optager. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 21 anmeldelser. Har du et spørgsmål om JVC XL-PG300B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

432

VOLUME

R L

OFF ON

HOLD

01 02 35

ButtonOperation

To pause

To stop

To turn off the

unit

Fast forward/

reverse

Display/reference

07 00 81

10 44 84

Skip function

During play,

Search function

Keep depressed during play.

• Play stops automatically

when all the tracks have

been played.

For your reference:

“dISC”

This indication appears if is pressed when no disc is loaded3 8/

or if the disc is not properly seated.

“– –”

Preparation period before playing the track

Flashes for several seconds after pressing to play.3 8/

“OPEn”

This indication appears when the lid is open.

Removing discs

Turn off the unit and, after the disc has stopped rotating, remove

the disc as shown below:

Auto power off

If the unit is left in stop mode for 30 seconds, the unit turns

itself off automatically to prevent the batteries from running

down.

Disc rotation noise

The portable CD player uses a power-saving operation method

so that disc rotation noise will intermittently be emitted. But, it

is not a failure.

• To skip back to the previous track, quickly press 4

twice.

• During Program play, the button is used to fast for-

ward or back through the programmed sequence of

tracks.

• During Random play, the skip button cannot be used

to skip back to tracks that were played previously in

the random sequence.

During play,

Reverse

Basic Play

Total number of tracks

Total playing time.

Label side

Elapsed playing time of

each track

No indication

Intro play

You can successively play the first 10 seconds of every track.

1While stopped,

INTRO

MODE

To cancel

Press MODE repeatedly until “INTRO” goes out.

Notes:

• You can also select Intro play during playback.

In this case, Intro play will start from the next track after the

current track has finished.

• You can also select Intro play during Program play mode.

Random play

During playback,

MODE

RANDOM

After playing all tracks, the unit stops.

To cancel

Press MODE until “RANDOM” goes out, or press to stop the7

disc.

Notes:

• You can also select Random play in stop mode.

• During Program play, you can not select Random play.

Program play

You can program up to 32 tracks in any desired order including

the same tracks.

1While stopped,

PROG

00 01

PROGRAM

2Select the desired track.

PROG

03 01

PROG

PROGRAM

The track is registered.

Repeat steps 2 and 3.

When you program exceeding 32 tracks, the program se-

quence number returns to “01” and will overwrite the previ-

ous setting.

• To confirm the program

While stopped, press PROGRAM repeatedly. At this time, you

can change the program, if required.

• To delete the entire program

Turn off the unit.

Program sequence

number

Track number to be programmed

00: Not programmed yet.

e.g. Track number 3

Repeat play

You can repeat one track or all tracks.

During playback,

MODE

ALL

To cancel

Press MODE repeatedly until the repeat indicator goes out.

Notes:

• You can also select Repeat play during Program play.

• You can also select Repeat play while stopped.

Hyper-Bass Sound effect

You can enjoy powerful bass sound.

OFF 21

HBS

Anti-Shock Protection EX

This function achieves excellent performance against sound inter-

ruption caused by vibrations. You will be able to enjoy listening

to music during (not vigorous) jogging.

By utilizing the high-performance servo circuit, audio data will be

stored in the memory ahead of time (up to 45 seconds worth).

Normally, this function is in effect.

A NT I

SH OC K

As the audio data is gradually stored, the indicator changes as follows:

To cancel

A.S.P

The “ANTI SHOCK” indicator goes out.

To activate again

Press the ASP button.

Notes:

• During this operation, the disc rotates at a higher rate than usual

in order to collect extra audio data. This may cause the batteries

to run out faster and could result in a slight increase in disc rota-

tion noise.

• This function can be switched ON and OFF during playback.

However, this may cause a slight interruption in the sound be-

cause the disc’s rotational speed changes.

[Fully stored]

ANTI SHOCK

indicator

(Repeatedly)

Next program sequence number

(Repeatedly)

Other Play Methods

(Repeatedly)

Power Supply Preparations

The illustration of the grip band is omitted.

Using dry-cell batteries

(not supplied)

Caution:

Do not forcibly open the battery lid too wide.

Battery indicator

This indicator appears when the batteries are almost out of power.

Power will be cut off a short while later.

Note:

Turning off the Anti-Shock Protection EX will save the battery power

more or less. For details, see “Anti-shock Protection EX” on page 4.

Battery indicator

AC adaptor

Using the AC adaptor (not supplied)

Notes:

• Even if the unit is turned off, small power is consumed as long

as the AC adaptor is connected to the AC power outlet.

• When you want to purchase the AC adaptor, see page 5.

AC power outlet

• When the unit is in Hold mode, “HoLd” and “ ” lights as

follows.

Power on : “ ” stays lit.

Power off : “HoLd” and “ ” lights up for a few seconds

when 6 is pressed.

Note:

If the HOLD switch is set to the ON position, you cannot turn on

the unit.

This function causes the unit to ignore, accidental button presses.

Hold mode prevents the following:

• Powering on the unit accidentally (which can cause the batter-

ies to go dead).

• Play being cut off unexpectedly.

To use the Hold mode

OFF ON

HOLD

• To prevent the unit from powering on accidentally, set the

HOLD switch to the ON position while the unit is turned off.

• To prevent the unit from unexpected operation during play,

set the HOLD switch to the ON position after you starts play-

ing the disc.

Preventing Accidental Operation (Hold mode)

The illustration of the grip band is omitted.

Follow the steps in the numerical order.

Two “AA” (LR6) alkaline batteries.

AC adaptor (for multi voltage area only)

(not supplied)

Before use

Make sure the present voltage of your AC adaptor fits to your lo-

cal voltage before plugging it into the AC power outlet. If it

doesn’t, shift the AC line-voltage selector with a screwdriver so

that it corresponds to your local voltage.

VOLTAGE

ADJUSTOR

AC 110V

~127V

AC 220V

~240V

If the power plug will not fit your socket, use the AC plug adaptor.

How to use the AC plug adaptor (not

supplied)

Note:

When you want to purchase the AC adaptor and the AC plug

adaptor, see page 5.

Track number in play

Firmly connect

Forward

While stopped,

Press again to restart play.

Produkt Specifikationer

Mærke:	JVC
Kategori:	CD-afspiller/optager
Model:	XL-PG300B

Har du brug for hjælp?

Hvis du har brug for hjælp til JVC XL-PG300B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

CD-afspiller/optager JVC Manualer

27 September 2024

23 August 2024

15 August 2024

13 August 2024

9 August 2024

4 August 2024

1 August 2024

31 Juli 2024

30 Juli 2024

JVC RC-E561B-DAB Manual

28 Juli 2024

CD-afspiller/optager Manualer

Nyeste CD-afspiller/optager Manualer

Technics SL-G700 Manual

12 Januar 2025

OK OPC 200CD Manual

11 Januar 2025

Rotel Michi Q5 Manual

4 Januar 2025

Marantz SA-17S1 Manual

30 December 2025

S.M.S.L PL100 Manual

16 December 2024

Ruark Audio R-CD100 Manual

11 December 2024

Auna Stereosonic Manual

9 December 2024

Pioneer CD-SB10 Manual

7 December 2024

Sony Walkman DEJ010 Manual

5 Oktober 2024

Tascam CD-RW901SL Manual

4 Oktober 2024