Kelvinator JS4BD018KB Manual


Læs gratis den danske manual til Kelvinator JS4BD018KB (20 sider) i kategorien Aircondition. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Kelvinator JS4BD018KB, eller vil du spørge andre brugere om produktet?

Side 1/20
SPLIT SYSTEM AIR CONDITIONER
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INFORMATION ................. 2
AIR CONDITIONER INSTALLATION ....................3
General Information .............................................. 3
Before You Install this Unit .....................................3
Locating the Air conditioner...................................3
Packaging Removal ..............................................3
Ground Level .........................................................3
Roof Mount............................................................3
Connecting Refrigerant Tubing between the
Indoor & Outdoor Unit ........................................... 4
ELECTRICAL WIRING ...........................................4
Pre - Electrical Checklist ....................................... 4
Line Voltage ...........................................................4
Comfort Alert
TM
Diagnostics Module .....................5
24VAC Power Wiring ...........................................5
Thermostat Demand Wiring ................................5
Interpreting the Diagnostic LED’s .......................5
LED Description .................................................. 6
Grounding .............................................................6
Thermostat Low / Voltage Connections ................. 6
AIR CONDITIONER MAINTENANCE ....................6
STARTUP & ADJUSTMENTS ...............................7
Pre - Start Checklist .............................................. 7
Start-up Procedures ..............................................7
Air Circulation - Indoor Blower ..............................7
System Cooling .....................................................7
System Heating .....................................................7
DO NOT DESTROY. PLEASE READ CAREFULLY & KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
IMPORTANT
ATTENTION INSTALLERS:
It is your responsibility to know this product better than your customer. This includes
being able to install the product according to strict safety guidelines and instructing
the customer on how to operate and maintain the equipment for the life of the product.
Safety should always be the deciding factor when installing this product and using
common sense plays an important role as well. Pay attention to all safety warnings and
any other special notes highlighted in the manual. Improper installation of the furnace
or failure to follow safety warnings could result in serious injury, death, or property
damage.
These instructions are primarily intended to assist qualified individuals experienced in
the proper installation of this appliance. Some local codes require licensed installation/
service personnel for this type of equipment. Please read all instructions carefully
before starting the installation. Return these instructions to the customer’s package
for future reference.
S4BD SERIES - 018, 024, 030, 036, 042, 048, & 060 (1.5, 2, 2.5, 3, 3.5, 4, & 5 Ton)
13 SEER, SINGLE PHASE MODELS
Refrigerant Charging .............................................7
Charging the Unit in AC Mode with
Outdoor Temperatures Above 55° F ......................8
Application Notes for Using Charging Charts .......8
S4BD CHARGING CHARTS .................................8
Figure 3. Charging Chart for 1.5 Ton Units .......... 8
Figure 4. Charging Chart for 2 Ton Units ............. 9
Figure 5. Charging Chart for 2.5 Ton Units .......... 9
Figure 6. Charging Chart for 3 Ton Units ........... 10
Figure 7. Charging Chart for 3.5 Ton Units ........ 10
Figure 8. Charging Chart for 4 Ton Units ........... 11
Figure 9. Charging Chart for 5 Ton Units ........... 11
S4BD CHARGING TABLES ................................. 12
Table 3. Charging Table for 1.5 Ton Units .......... 12
Table 4. Charging Table for 2 Ton Units ............. 12
Table 5. Charging Table for 2.5 Ton Units .......... 13
Table 6. Charging Table for 3 Ton Units ............. 13
Table 7. Charging Table for 3.5 Ton Units .......... 14
Table 8. Charging Table for 4 Ton Units ............. 14
Table 9. Charging Table for 5 Ton Units ............. 15
ELECTRICAL DIAGRAMS & TABLES ................ 16
Figure 10. W.D., Single Phase (1.5 - 5 Ton) ...... 16
Table 10. Comfort Alert LED Diagnostics .......... 17
Table 11. Module Wiring Troubleshooting .......... 18
INSTALL. / PERFORMANCE CHECKLIST ......... 20
REPLACEMENT PARTS ...................................... 20
2
WARNING:
The information listed below must be followed
during the installation, service, and operation
of this unit. Unqualified individuals should
not attempt to interpret these instructions or
install this equipment. Failure to follow safety
recommendations could result in possible
damage to the equipment, serious personal
injury or death.
• The installer must comply with all local codes and
regulations which govern the installation of this type
of equipment. Local codes and regulations take
precedence over any recommendations contained in
these instructions. Consult local building codes and
the National Electrical Code (ANSI CI) for special
installation requirements.
• Allelectricalwiringmustbecompletedinaccordance
with local, state and national codes and regulations
and with the National Electric Code (ANSI/NFPA 70)
or in Canada the Canadian Electric Code Part 1 CSA
C.22.1.
• Thisequipmentcontainsliquidandgaseousrefrigerant
under high pressure. DO NOT USE ANY PORTION OF
THE CHARGE FOR PURGING OR LEAK TESTING.
Installation or servicing should only be performed by
qualified trained personnel thoroughly familiar with this
type equipment.
• Fullyannealed,refrigerantgradecoppertubingshould
be used when installing the system. Refrigerant suction
line tubing should be fully insulated.
Installation of equipment may require brazing
operations. Installer must comply with safety codes
and wear appropriate safety equipment (safety glasses,
work gloves, fire extinguisher, etc.) when performing
brazingoperations.
• Followallprecautionsintheliterature,ontags,and
on labels provided with the equipment. Read and
thoroughly understand the instructions provided with
the equipment prior to performing the installation and
operational checkout of the equipment.
• Refrigerantandelectricallineshouldberoutedthrough
suitably waterproofed openings to prevent water from
leaking into the structure.
IMPORTANT SAFETY INFORMATION
INSTALLER: Please read all instructions before servicing
this equipment. Pay attention to all safety warnings and
any other special notes highlighted in the manual. Safety
markings are used frequently throughout this manual to
designate a degree or level of seriousness and should
not be ignored.
WARNING indicates a potentially hazardous situation
that if not avoided, could result in personal injury or death.
CAUTIONindicatesapotentiallyhazardoussituationthat
if not avoided, may result in minor or moderate injury or
property damage.
WARNING:
Shut off all electrical power to the unit before
performing any maintenance or service on the
system. Failure to comply may result in personal
injury or death.
WARNING:
Unless noted otherwise in these instructions,
only factory authorized parts or accessory
kits may be used with this product. Improper
installation, service, adjustment, or maintenance
may cause explosion, fire, electrical shock or
other hazardous conditions which may result
in personal injury or property damage
WARNING:
S4BD Split System Air Conditioners are shipped
charged with R410A refrigerant and ready
for installation. If repairs make it necessary
for evacuation and charging, it should only
be attempted by qualified trained personnel
thoroughly familiar with this equipment. Under
no circumstances should the owner attempt to
install and/or service this equipment. Failure to
comply with this warning could result in property
damage, personal injury, or death.
CAUTION:
This unit uses refrigerant R-410A. DO NOT use
any other refrigerant in this unit. Use of another
refrigerant will damage the unit.


Produkt Specifikationer

Mærke: Kelvinator
Kategori: Aircondition
Model: JS4BD018KB

Har du brug for hjælp?

Hvis du har brug for hjælp til Kelvinator JS4BD018KB stil et spørgsmål nedenfor, og andre brugere vil svare dig