Kenwood Excelon CA-PLT98 Manual

Kenwood Ikke kategoriseret Excelon CA-PLT98

Læs gratis den danske manual til Kenwood Excelon CA-PLT98 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Kenwood Excelon CA-PLT98, eller vil du spørge andre brugere om produktet?

Side 1/2
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new product.
© 2023 JVCKENWOOD Corporation
CA-PLT98
XM160-2-98 AMPLIFIER SIDE PLATE DESIGNED AND ENGINEERED FOR
1998-2013 HARLEY-DAVIDSON® FLH “BATWING” MOTORCYCLES
INSTRUCTION MANUAL
JVCKENWOOD Corporation
Important Notes
©2023 JVCKENWOOD Corporation. All Rights Reserved. KENWOOD® and eXcelon®
are registered trademarks of JVCKENWOOD Corporation. Harley-Davidson®, Electra
Glide®, Road Glide®, Street Glide®, Ultra Classic®, Tri Glide®, CVO™, Screamin Eagl
and Tour-Paare trademarks or registered trademarks of Harley-Davidson, Inc. and/
or its affiliates and if used or implied are for reference only. There is no affiliation
between Harley-Davidson, Inc. and/or its aliates and JVCKENWOOD Corporation
and/or its aliates. All other trademarks are the property of their respective owners.
Specications subject to change without notice.
XM160-2-98 Amplier Side Plate Installation Instructions
Installation procedure
1. On the brake side of the bike, remove the 3 factory bolts shown by the white arrows in
Fig. 1.1, noting the brake side fairing support bracket will be removed, and not re-used.
2. Install the plate into the bike using the factory fasteners just removed, noting it’s best to
loosely install all 3 fasteners before tightening.
3. Using the supplied “hook and loop” material, secure the amplier to the plate so it’s
oriented with the power harness at the bottom. The extra length of that amp will sit
below the main plate by approx.. 1/2 and to the left (brake side) by approx. 1/2, so the
outer fairing will go back on. You will need to adjust accordingly.
NOTE: This kit includes a wire harness with white/black and red/black wires. If you already
have an existing XM160-2-98 and are adding a second XM160-2-98, the supplied harness
will plug into the “bypass out on the existing XM160-2-98. This is what sends music from
the existing XM160-2-98 to the second XM160-2-98. The white/black pair of wires on the
supplied harness will plug into the yellow/black wires (clutch side input) on the second
XM160-2-98. The red/black wires on the supplied harness will plug into green/black (brake
side input) on the second XM160-2-98. KENWOOD lids and lower fairing speaker kits come
with harnesses to get music from the amplier to them. For other installs, you can modify
the output harness that came with your amplier, noting that the blue is the brake side,
and the brown is the clutch side.
Fig 1.1
For updated information (the latest Instruction Manual, etc.),
please visit the following website:
https://manual.kenwood.com/en_contents/search/


Produkt Specifikationer

Mærke: Kenwood
Kategori: Ikke kategoriseret
Model: Excelon CA-PLT98

Har du brug for hjælp?

Hvis du har brug for hjælp til Kenwood Excelon CA-PLT98 stil et spørgsmål nedenfor, og andre brugere vil svare dig