Kenwood KAS-10 Manual


Læs gratis den danske manual til Kenwood KAS-10 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Kenwood KAS-10, eller vil du spørge andre brugere om produktet?

Side 1/6
INSTALLATION MANUAL
SUPPLIED ITEMS
Your software package includes the following:
CD
Installation manual
RECOMMENDED SYSTEM REQUIREMENTS
Recommended operating systems as follows:
Windows 7, Windows 8.1, or Windows 10 operating system.
not support touch input.)
Microsoft .NET Framework 3.5(Includes .NET2.0 and 3.0)
CPU: Recommended by the OS or faster.
RAM: Recommended by the OS or more.
1024 x 768 screen resolution or higher.
CD-ROM/ DVD-ROM drive.
Microsoft MapPoint 2006/ 2009/ 2010/ 2011/ 2013 < North
American Maps/ European Maps > (Optional).
100 MB of free hard drive space plus an additional 1.9 GB for
the Microsoft MapPoint software.
COM port.
Note:
This KAS-10 package does not include Microsoft MapPoint software.
To use MapPoint, you must purchase it separately and install it.
Depending on the type of supplied media of the Microsoft
MapPoint, a DVD-ROM drive may be required.
The Dutch version of Microsoft MapPoint is not available.
To use the IP Network protocol, you must purchase a USB-3000 vocoder
unit separately. The USB-3000 is a product from DVSI corporation.
INSTALLING AND RUNNING THE SOFTWARE
Note:
To install the MapPoint and KAS-10 and to start up the KAS-10,
you must use the same user name to log onto Windows 7,
Windows 8.1, or Windows 10.
To install or uninstall the KAS-10 in a Windows environment, you
must have administrator privileges.
Exit all Windows applications before installing the software.
Installing Microsoft MapPoint
When using MapPoint, follow the procedure below for
installation.
When using Scanned Map, it is not necessary to follow the
procedure below.
1
Insert the Microsoft MapPoint disc labeled “Disc 1 Setup”
into your CD-ROM drive or the DVD disc into your DVD-ROM
drive.
2
If the setup program does not start automatically, double-
click the “My Computer” icon, select the CD-ROM/ DVD-
ROM drive containing the Microsoft MapPoint disc and then
double-click “setup.exe”. Follow the instructions that appear
on the screen to install the software.
AVL/DISPATCH SOFTWARE
KAS-10
B62-2104-50
COPYRIGHTS
Microsoft
®
, Windows
®
, and MapPoint
®
are registered
trademarks of Microsoft Corporation in the United States
and/or other countries.
Adobe
®
Reader
®
is a registered trademark of Adobe
Systems Incorporated in the United States and/or other
countries.
USB-3000 is a registered trade mark of DVSI corporation.
Other product and company names mentioned herein may
be the trademarks of their respective owners.
< 1/6 >
Note:
If a newer version of MapPoint is installed onto a PC where a
previous or earlier version has been installed, we recommend you
uninstall the previous or earlier version of MapPoint.
Refer to the instruction manual supplied with MapPoint for details
describing how to install the MapPoint software.
The GPS Locator supplied with MapPoint 2006/ 2009/ 2010 with
GPS Locator cannot be installed in KENWOOD transceivers.
Do not connect these types of receivers to your KENWOOD
transceivers.
Installing and Running KAS-10
1
Insert the supplied CD into your CD-ROM drive.
2
Run the “setup.exe” fi le in the CD.
3
Follow the instructions given in the installation program.
4
When using the IP Network Protocol , place the USB-3000
into the USB port.
5
Click the “KAS-10” icon in the Start menu to run the software.
Note:
To install this software, you must enter the serial number that is
printed on the disc case.
The serial number will not be re-issued if it is lost or misplaced.
Be sure to keep it in a safe place.
TIPS FOR OPERATION
Refer to the Help texts or the Basic Operations fi le in this
software, for operation details of the KAS-10.
Note:
Basic Operations fi le is available in PDF fi le format. To read the
le, you must use Adobe Reader.
An icon fi le to be registered in an Icon of Mobile Station Options
needs to be confi gured with transparency. In addition, the 4 pixels
of the 4 icon corners must always be transparent.
© 2019
GUIDE D’INSTALLATION
ARTICLES FOURNIS
Votre ensemble logiciel comprend les éments suivants :
CD
Guide d’installation
EXIGENCES SYSTÈME RECOMMANDÉES
Système d’exploitation Windows 7, Windows 8.1 ou Windows 10.
(L’utilisation en mode bureau est recommandée. Ce logiciel ne
permet pas lasaisie tactile.)
Microsoft .NET Framework 3.5 (inclut .NET2.0 et 3.0)
CPU: Recommandé pour le SE ou plus rapide.
RAM: Capacité mémoire supérieure à celle recommandée
pour le SE.
Résolution décran de 1024 x 768 ou supérieur.
Lecteur CD-ROM/DVD-ROM.
Logiciel Microsoft MapPoint 2006/ 2009/ 2010/ 2011/2013
<Cartes nordaméricaines/ Cartes européennes> (optionnel).
Espace libre de 100 Mo sur disque dur plus 1,9 Go
supplémentaire pour le logiciel Microsoft MapPoint.
Port COM.
Remarques :
Cet ensemble logiciel KAS-10 ne comprend pas le logiciel
Microsoft MapPoint. Vous devez acheter et installer le logiciel
MapPoint sépament pour l’utiliser.
En fonction du type de support fourni avec Microsoft MapPoint,
un lecteur DVD-ROM peut être nécessaire.
Microsoft MapPoint n’est pas disponible en version néerlandaise.
Pour utiliser le protocole de réseau IP, vous devez vous procurer
séparément un vocodeur USB-3000. Le USB-3000 est un produit
de DVSI corporation.
INSTALLATION ET EXÉCUTION DU LOGICIEL
Remarques :
Pour installer le MapPoint et le KAS-10 et pour démarrer le KAS-
10, vous devez utiliser le me nom d’utilisateur que pour la
connexion à Windows 7, Windows 8.1 ou Windows 10.
Pour installer ou désinstaller le KAS-10 sous un environnement
Windows 7, Windows 8.1 ou Windows 10, vous devez disposer
des droits d’administrateur.
Fermez toutes les applications Windows avant l’installation du
logiciel.
Installation de Microsoft MapPoint
Lors de l’utilisation de MapPoint, suivez la procédure
d’installation ci-dessous.
Lors de l’utilisation de Scanned Map, il est inutile de suivre la
produre ci-dessous.
1
Insérez le disque Microsoft MapPoint portant l’inscription “Disc
1 Setup” dans votre lecteur CD-ROM ou le disque DVD dans
votre lecteur DVD-ROM.
LOGICIEL AVL/GESTION RADIO
KAS-10
DROITS DAUTEUR
Microsoft
®
, Windows
®
et MapPoint
®
sont des marques
déposées de Microsoft Corporation aux Etats-Unis et/ou
dans dautres pays.
Adobe
®
Reader
®
est une marque déposée de Adobe Systems
Incorporated aux Etats-Unis et/ou dans d’autres pays.
USB-3000 est une marque de commerce déposée de
DVSI corporation.
Les autres noms de produits et de compagnies mentionnés ici
peuvent être des marques de leurs propriétaires respectifs.
< 2/6 >
2
Si le programme dinstallation ne démarre pas
automatiquement, double-cliquez sur l’icône “Mon
ordinateur”, sélectionnez le lecteur CD-ROM/DVD-ROM
contenant le disque Microsoft MapPoint et double-cliquez sur
“setup.exe”. Suivez les instructions qui s’af chent à l’écran
pour installer le logiciel.
Remarques :
Si une version précédente ou plus récente du MapPoint est
installée sur un ordinateur PC où une version précédente
ou antérieure du MapPoint avait été installée, nous vous
recommandons de désinstaller la version précédente ou
antérieure du MapPoint.
Reportez-vous au manuel d’instructions fourni avec MapPoint
pour plus de détails concernant la procédure d’installation du
logiciel MapPoint.
Le GPS Locator fourni avec MapPoint 2006/ 2009/ 2010 with GPS
Locator ne peut pas être installé sur les émetteursrécepteurs
KENWOOD. Ne raccordez pas ces types de récepteurs à vos
émetteurs-récepteurs KENWOOD.
Installation et exécution du logiciel KAS-10
1
Insérez le CD fourni dans votre lecteur CD-ROM.
2
Exécutez le fi chier “setup.exe” du CD.
3
Suivez les instructions données dans le programme
d’installation.
4
Lorsque vous utilisez le protocole de réseau IP, placez le
USB-3000 dans le port USB.
5
Cliquez sur l’icône “KAS-10” dans le menu Démarrer pour
exécuter le logiciel.
Remarques :
Pour installer ce logiciel, vous devez entrer le numéro derie
imprimé sur le boîtier du disque.
Le nuro de série ne sera pas réémis s’il est perdu ou déclassé.
Veillez à le conserver dans un endroit sûr.
ASTUCES POUR LE FONCTIONNEMENT
Reportez-vous aux textes daide ou au fi chier Basic Operations du
logiciel concernant les détails de fonctionnement du logiciel KAS-10.
Remarques :
le fi chier Basic Operations est disponible en format de chier
PDF. Pour lire le chier, vous devez utiliser Adobe Reader.
Un fi chier d'icône à enregistrer dans une icône des Options pour les
stations mobiles doit être confi guré avec transparence. De plus, les
4 pixels des 4 coins de l'icône doivent toujours être transparents.


Produkt Specifikationer

Mærke: Kenwood
Kategori: Ikke kategoriseret
Model: KAS-10

Har du brug for hjælp?

Hvis du har brug for hjælp til Kenwood KAS-10 stil et spørgsmål nedenfor, og andre brugere vil svare dig