KitchenAid KFGC558JAV Manual

KitchenAid Ovn KFGC558JAV

Læs gratis den danske manual til KitchenAid KFGC558JAV (4 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om KitchenAid KFGC558JAV, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
KFGC506J shown on right
(reference Use & Care Guide for 30” and 48” diagrams)
FUNCTION USE & LIGHT BEHAVIOR
Oven Start
Button
Solid White Light
The Start Button will illuminate solid white when the most recent command was sent from the app and the appliance is
being controlled remotely. The light will turn off as soon as an action is taken on the appliance.
Pulsing White Light
The Start Button will ash white to prompt the user to press start after the Mode and Temperature have been selected.
If no action is taken after 2 minutes, a tone will sound and the unit will timeout and return to idle.
To exit idle, re-select a Mode and Temperature before pressing the Start Button.
Quick-Blinking White Light
If an invalid knob combination has been chosen and the Start Button is pressed, the Indicator Light will quickly blink and
a tone will sound to indicate that the chosen combination is invalid. See the Mode and Temperature Compatibility Table
for valid combinations.
Mode and
Temperature
Indicator Light
Solid LightWhite
When a Mode or Temperature is selected, and the combination is valid, the Mode and Temperature Indicator Light
will illuminate white.
Solid LightRed
After a valid Mode and Temperature have been selected and the Start Button has been pressed, the Indicator Light
will turn red until the preheat is completed.
Solid LightWhite
The light will turn solid white and a tone will sound when the preheat is complete. If there is no preheat for a cycle,
the preheat completes immediately and the Indicator Light turns solid white.
Quick-Blinking LightWhite
If an invalid knob combination has been selected, the Indicator Light will blink and a tone will sound prompting the user to
select a valid combination. The Indicator Light will continue to blink and a tone will sound every 30 seconds until the error
is xed or the unit will timeout after 2 minutes of inactivity and return to idle.
Pulsing LightAmber
The Indicator Light will pulse amber if the oven is undergoing a 100+ degree decrease in temperature
(i.e. changing from Bake 450℉ to Bake 350℉) or if the oven is too hot to properly proof and needs to cool down.
WIFI Indicator
Light
Solid LightWhite
The WIFI Indicator Light illuminates white when the unit is WIFI enabled allowing the user to monitor
the unit. All lights will turn off in idle even when the unit is connected to WIFI.
Remote Enabled
Indicator Light
Solid LightWhite
The Remote Indicator Light illuminates white when the unit is remote enabled and the user can send instructions
to the unit. All lights will turn off in idle even when the unit is remote enabled.
Griddle Power
Indicator Light*
Solid LightBlue
The Griddle Power Indicator Light illuminates blue when the griddle is powered on.
Griddle
Preheat Light*
Blinking LightBlue
The Griddle Preheat Light ashes blue while the griddle is preheating.
Solid LightBlue
Once the preheat temperature has been reached, the Indicator Light turns solid blue.
LIGHT INDICATORS AND BEHAVIORS
WIFI Antenna Module
Oven Light Button
Mode and Temperature Knob and Indicator Light
Oven Start Button and Indicator Light
WIFI Indicator Light
Remote Enabled Indicator Light
SAID Label
COMMERCIAL-STYLE GAS RANGE
QUICK REFERENCE GUIDE
*on 48” models only
W11364680A
WIFI CONNECTIVITY
WIFI Connectivity and Remote Operation
Models are provided with a WIFI Antenna Module that allows the
unit to be remotely operated. The control is capable of monitoring
and performing remote operations once the remote enabling
function sequence is properly initiated at the appliance.
To connect your appliance:
1. Download the KitchenAid™ App from the Google Play® or
Apple App Store and create an account.
2. Locate the SAID Label using the diagram on the front of this Guide.
3. Set both the Mode and Temperature Knob to the WIFI mode.
4. Once the knobs are in position, press the pulsing Start Button.
5. When the WIFI Indicator Light to the left of the knob starts
blinking white, follow the steps in the app.
6. When the connection is complete the WIFI Indicator Light
will turn solid white.
7. To enable remote operations, turn on “Remote Control” in the app.
The Remote Indicator Light will turn solid white to signify remote
control commands can be sent to the range.
For more information on WIFI Connectivity,
visit www.kitchenaid.com/connect.
®/™ ©2019 KitchenAid. All rights reserved. All other trademarks are owned by their respective companies. D190462KCB
MODE KNOB TEMPERATURE KNOB
Bake Proof
Warm
Temperatures (225-500°F)
Broil Broil High
Broil Low
Convect Bake Temperatures (225-500°F)
Convect Roast Temperatures (225-500°F)
Convect Pastry Temperatures (225-500°F)
Clean Clean
WIFI WIFI*
*See WIFI Connectivity Section
MODE AND TEMPERATURE
COMPATIBILITY TABLE
NOTE: When the unit is on, Mode can be changed
between Bake, Broil, Convect Bake, Convect Roast,
and Convect Pastry. Press the Start Button to
conrm Mode change.
*Appliance must be set to Remote Enable. Features subject to change. Compatible connected appliance required.
Details and privacy info at www.kitchenaid.com/connect.
ACTION EXAMPLE
Invalid Mode/
Temperature
Combination Made
During a Cycle*
*Mode and Temperature
Compatibility Table
If the Temperature is changed during a cycle to
a selection that is invalid and the unit was in
a previous cycle, the unit will remain in the
previous cycle until corrected.
The Mode and Temperature Indicator Light
will blink to show an invalid selection has been
made and will continue to blink until corrected.
Mode is in Bake, Temperature is at 350°F
(177°C), Start Button is pressed and cycle
is running. Then Mode is moved to
Broil High. Unit will continue to Bake
at 350°F (177°C).
Changing Mode
Selection During
a Cycle
If the Mode is changed during a cycle
to a selection that is valid, the Start Button
will blink to indicate prompt for action. Press
the Start Button to begin new Mode selection.
If the Mode is moved from Bake to
Convect Bake, the Start Button will blink
as a prompt for action.
Changing Temperature
Selection During
a Cycle
If the Mode is changed during a cycle to
a selection that is valid, the Temperature
will automatically change.
If the Temperature during a Bake cycle
is moved from 350°F to 450°F (177°C to
232°C) the unit will Bake at 450°F (232°C).
CHANGING MODE/TEMPERATURE DURING A CYCLE
W11364680A

Produkt Specifikationer

Mærke: KitchenAid
Kategori: Ovn
Model: KFGC558JAV

Har du brug for hjælp?

Hvis du har brug for hjælp til KitchenAid KFGC558JAV stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ovn KitchenAid Manualer

KitchenAid

KitchenAid KOES530PWH Manual

26 August 2025
KitchenAid

KitchenAid KOES527PSS Manual

25 August 2025
KitchenAid

KitchenAid KOES530PBS Manual

25 August 2025
KitchenAid

KitchenAid W10536160 Manual

2 August 2025
KitchenAid

KitchenAid KHIS 7720 Manual

2 Oktober 2024
KitchenAid

KitchenAid KGCU467VSS Manual

18 September 2024
KitchenAid

KitchenAid Architect KFGS306VSS Manual

13 September 2024
KitchenAid

KitchenAid KEMS306BAL0 Manual

8 September 2024
KitchenAid

KitchenAid KEBI271WBL0 Manual

8 September 2024
KitchenAid

KitchenAid KHGH 9010/I Manual

8 September 2024

Ovn Manualer

Nyeste Ovn Manualer

Schock

Schock SFP52IX2 Manual

14 September 2025
Belling

Belling BFS60DOGG Manual

14 September 2025
Belling

Belling BCC900DFB Manual

14 September 2025
Siemens

Siemens HB23A1520S Manual

14 September 2025
Belling

Belling BI902G Manual

14 September 2025
Belling

Belling BCC1100GTGSS Manual

14 September 2025
Belling

Belling BMR60DOINDW Manual

14 September 2025
Schock

Schock SFN54BKN Manual

14 September 2025
Belling

Belling BMR60DOINDB Manual

14 September 2025
Schock

Schock Silver F609 Manual

14 September 2025