KKT Kolbe BKW850 Manual

KKT Kolbe Ikke kategoriseret BKW850

Læs gratis den danske manual til KKT Kolbe BKW850 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12 anmeldelser. Har du et spørgsmål om KKT Kolbe BKW850, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

BKW 085

BKW 850

1 / 5

Integrated AC bus cable, Ready-To-Use

Low cost, Easy installation

Single it co ects up to two PV dulesun nn mo

Maximum 800W AC output power

Single-phase output, Flexible 3-phase PV system

WIFI communication and cloud monitoring

Up to 10 units (230V) per branch

Customizable various input (DC, PV) voltage range

PV M roinverteric

V1.1 / 221117

AC Bus Cable

to next inverter /

the Grid

DC Input 2

to PV Module

DC Input 1

to PV Module

AC Bus Cable

to the next inverter /

the Grid

Mounting Holes

Status light

Basic Structure

230,0000±0,0100

106,0000±0,0100

201,8000±0,0100

25,1000±0,0100

230,0000±0,0100

39,5000

±0,0100

102,0016±0,0100

Dimensions

Unit: mm

Functional description of the control lights

Status light (on the top of the unit)

Green light: The inverter is generating power and feeding in.

Red light: The inverter s not feeding in.

Possible reasons:

• The unit is not connected to the grid.

• The power generation is too low. The solar panels are not generating enough power for the inverter to start.

WiFi - control light (on the side of the unit)

Blue light lights up and starts flashing: The WFi cloud monitoring module is waiting to be configured.

Blue light lights up and goes out: The WiFi cloud monitoring module starts and enters the operating state.

Blue light flashes: Network is not configured.

Or: No connection can be established between the network and the wireless network device.

Or: The micro inverter has been de eted in the cloud.

No light: WiFi cloud monitoring s working normally.

Notes in case of connection problems between the unit and the route :

If the unit does not connect to the router, note the following:

• The unit is designed for the 2.4GHz frequency band. Make sure that the router is configured according y.

• Some routers onl connect to registered devices. Identify the inverter in your network via the router.

• You will find deta led instructions for WiFi cloud monitoring / a SmartApp manual in the scope of delivery of your device

or for download in our online shop at www.kolbe.de on the corresponding product page.

2 / 5 V1.1 / 221117

Produkt Specifikationer

Mærke:	KKT Kolbe
Kategori:	Ikke kategoriseret
Model:	BKW850

Har du brug for hjælp?

Hvis du har brug for hjælp til KKT Kolbe BKW850 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret KKT Kolbe Manualer

KKT Kolbe ECCO9005SM Manual

24 Juli 2025

KKT Kolbe EASY 6005 SM Manual

16 Juli 2025

KKT Kolbe POWERSET36 Manual

12 Januar 2025

KKT Kolbe DRAFT870 Manual

4 Oktober 2024

KKT Kolbe BKW 500 Manual

9 September 2024

KKT Kolbe TRI120-10MONTAGESET2B Manual

2 September 2024

KKT Kolbe BLUE10KT Manual

15 August 2024

KKT Kolbe BKW450 Manual

15 August 2024

KKT Kolbe TRI120-15-2 Manual

8 August 2024

KKT Kolbe TRI120-15MONTAGESET2B Manual

5 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hazet 179N-7 Manual

1 September 2025

WilTec 62808 Manual

1 September 2025

Atosa CSTEA-3C Manual

1 September 2025

Omnires Y1263/K Manual

1 September 2025

Gree IDAV 1421A Manual

1 September 2025

Atlas AT100-PA Manual

1 September 2025

Furman PL-Pro DMC E Manual

1 September 2025

Omnires Y1236/K MAX Manual

1 September 2025

Gree IDAV 1021A Manual

1 September 2025

Gree IDAV 1321A Manual

1 September 2025