Konica-Minolta Minolta 3D 1500 Manual

Konica-Minolta Kamera Minolta 3D 1500

Læs gratis den danske manual til Konica-Minolta Minolta 3D 1500 (30 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Konica-Minolta Minolta 3D 1500, eller vil du spørge andre brugere om produktet?

Side 1/30
- 1 -
Thank you for purchasing the Minolta 3D 1500.
Please take the time to read through this instruction manual so you can enjoy all its
features.
For information on installing and operating the included application software, please
read the software instruction manual saved in the CD-ROM as a pdf file.
This manual contains information regarding products introduced before Sep., 1999.
To obtain compatibility information for products released after this date, contact a
Minolta Service Facility listed on the back cover of this manual.
This mark on your camera certifies that this camera
meets the requirements of the EU (European Union)
concerning interference causing equipment
regulations.
CE stands for ConformiEuropéenne (European
Conformity).
Digital Camera: 3D 1500
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Tested by the Minolta Corporation
101 Williams Drive, Ramsey, New Jersey 07446,
U.S.A.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil num rique de la classe B est conforme la norme NMB-003 du Canada.é à
Do not remove the ferrite cores from the cables.
MetaFlash , MetaFlash Studio, and MetaStream are trademarks of
MetaCreations Corporation.
Windows®is a registered trademark in the United States and other countries of
Microsoft Corporation.
- 3 -
BEFORE YOU BEGIN FOR PROPER AND SAFE USE
- 2 -
Read and understand all warnings and cautions before using this product.
WARNING
Batteries may become hot or explode due to improper use.
Use only the batteries specified in this instruction manual.
Do not install the batteries with the polarity (+/-) reversed.
Do not subject batteries to fire or high temperatures.
Do not attempt to recharge, short, or disassemble.
Do not mix batteries of different types, brands, or ages.
Use caution, accidents may occur when using this product near young children.
Keep batteries or things that could be swallowed away from young children. Contact
a doctor immediately if an object is swallowed.
Immediately remove the batteries and discontinue use if...
the camera is dropped or subjected to an impact in which the interior is exposed.
the product emits a strange smell, heat, or smoke.
Do not walk while looking at the monitor.
Do not disassemble. Electric shock may occur if a high voltage circuit inside the
camera is touched.
Take your camera to a Minolta Service Facility when repairs are required.
CAUTION
The heat of the camera rises with extended periods of use. Use caution when
handling the camera or removing the batteries and compact flash card.
The lens retracts when the camera is turned off or Auto Power Off is activated.
Touching the lens barrel while it is retracting may cause injury.
Check the packing list before you begin. If some parts are missing, contact your
camera dealer or a Minolta Service Facility listed on the back cover of this manual.
Minolta 3D 1500 camera (x 1)
Camera Bracket CB-3D1 (x 1)
AA-size Alkaline Batteries (x 8)
AC Adapter (x 1)
Quest®8 HOUR NiMH BATTERY CHARGER and NiMH BATTERIES
Quest®AA-size rechargeable NiMH batteries (x 4)
Size AA & size AAA NiMH battery charger (x 1)
Video Cable VC-EX1 (x 1)
CD-ROM (x 1)
MetaFlashStudio for Windows®
MetaStreamViewer Plug-in (Web browser Plug-in)
MetaFlashStudio User Guide (PDF file)
Adobe AcrobatReader 4.0 Installer
Floppy Disk (x 1)
Calibration File
Script file for reading the number of MetaFlash fired (GETSCNT.CSM)
LexarMedia JumpShot®USB connection kit
32MB USB-enabled CompactFlash card (x 1)
JumpShot®USB cable (x 1)
Documentation
Camera Instruction Manual (this manual) (x 1)
Dimâge EX Camera Instruction Manual (x 1)
Dimâge EX Version 2 Guide (x 1)
Warranty (x 1)
[IMPORTANT] About the Calibration File
The attached floppy disk contains a calibration file. The data in this file is
required to generate 3D images for MetaFlash Studio from the image data
which is taken with the 3D 1500 camera. You could generate no 3D image
without this data.
The calibration file is unique to each 3D 1500 camera. You can not use it for
another 3D 1500 camera You can not use the calibration file for another 3D
1500 camera with your 3D 1500 camera, either.
Exercise adequate care when handling or storing the floppy disk so that the
calibration file on the floppy disk may not be lost or corrupted. Be sure to take a
backup copy of the floppy disk in case it is lost or damaged. It is recommended
that, whenever possible, the data on the floppy disk be saved on two or more
storage media such as another floppy disk, hard disk, and Zip disk.


Produkt Specifikationer

Mærke: Konica-Minolta
Kategori: Kamera
Model: Minolta 3D 1500

Har du brug for hjælp?

Hvis du har brug for hjælp til Konica-Minolta Minolta 3D 1500 stil et spørgsmål nedenfor, og andre brugere vil svare dig