Kress KUG02 Manual
Læs gratis den danske manual til Kress KUG02 (68 sider) i kategorien bore. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Kress KUG02, eller vil du spørge andre brugere om produktet?
Side 1/68

KUC12
Lithium-Ion brushless impact drill EN P05
Akku-Schlagbohrschrauber bürstenlos DE P11
Foreuse à impact sans brosse de Lithium-Ion FR P18
Trapano a impatto senza spazzole a batterie agli ioni di Litio IT P25
Taladro con percusión a batería sin escobillas ES P32
Broca de impacto de iões de lítio sem escova PT P39
Borstelloze slagboormachine met lithiumion NL P46
Литий-ионная аккумуляторная ударная дрель-шуруповёрт
RU P53
Bezszczotkowa wiertarka udarowa litowo-jonowa
PL P61

1 2 3 4
5
7
8
6
9
10
11

C3C2
ED
GF

7
EN
j) After extended periods of storage, it may
be necessary to charge and discharge
the battery pack several times to obtain
maximum performance.
k) Recharge only with the charger specified
by Kress. Do not use any charger other
than that specifically provided for use with
the equipment.
l) Do not use any battery pack which is not
designed for use with the equipment.
m) Keep battery pack out of the reach of
children.
n) Retain the original product literature for
future reference.
o) Remove the battery from the equipment
when not in use.
p) Dispose of properly.
q) Do not mix cells of different manufacture,
capacity, size or type within a device.
r) Keep the battery away from microwaves
and high pressure.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
Wear eye protection
Wear ear protection
Wear dust mask
Do not burn
Batteries may enter water cycle if
disposed improperly, which can be
hazardous for ecosystem. Do not
dispose of waste batteries as unsorted
municipal waste.
Li-I on
Li-Ion battery. This product has been
marked with a symbol relating to
‘separate collection’ for all battery
packs and battery pack. It will then
be recycled or dismantled in order to
reduce the impact on the environment.
Battery packs can be hazardous for the
environment and for human health since
they contain hazardous substances.
Wear protective gloves
Screwdriving
Drilling
Hammer drill
Wood
Metal
Concrete
High speed
Low speed
Lock
Waste electrical products must not
be disposed of with household waste.
Please recycle where facilities
COMPONENT LIST
1. CHUCK
2. TORSION ADJUSTING RING
3. MODE SWITCH REGULATING RING
4. MECHANICAL TRANSMISSION LEVER
5. BATTERY STATUS
6. REVERSING LEVER
7. SOFT HANDLE
8. BATTERY PACK LOCK KNOB
9. BATTERY PACK*
10. START/STOP SWITCH
11. LED LAMP
* Not all the accessories illustrated or
described are included in standard delivery.

8
EN
TECHNICAL DATA
Type Designation KUC12 (C12-designation of
machinery, representative of drill)
KUC12
Rated voltage 12V Max**
Rated no load speed 0-500/ 0-1800/min
Torsion adjusting positions 20+1+1
Max torque 40Nm
Maximum clamping capability 10mm
Max. drilling
capacity
Steel 10mm
Wood 20mm
Brick wall 8mm
Machine Weight 0.95kg
Battery capacity 2.0Ah
** Voltage measured without workload. Initial battery
voltage reaches maximum of 12 volts. Nominal
voltage is 10.8 volts.
NOISE INFORMATION
A weighted sound pressure LpA = 78,6 dB(A)
A weighted sound power LwA
= 92,6 dB(A)
KpA
&KwA 5 dB(A)
Wear ear protection.
WEAR EAR PROTECTION
Vibration total values (triax vector sum) determined
according to EN 62841:
Drilling into metal
Vibration emission value
ah,D = 1,916 m/s²
Uncertainty K = 1.5 m/s²
Impact drilling into
concrete
Vibration emission value
ah,ID = 8,942 m/s²
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING:The vibration and noise emissions
during actual use of the power tool can differ from
the declared value depending on the ways in which
the tool is used especially what kind of workpiece is
processed dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may signicantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ACCESSORIES
KUC12
2.0Ah lithium battery pack(KPB1202) 2
1.5A charger (KCH1202) 1
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
the tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
Produkt Specifikationer
Mærke: | Kress |
Kategori: | bore |
Model: | KUG02 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Kress KUG02 stil et spørgsmål nedenfor, og andre brugere vil svare dig
bore Kress Manualer
25 August 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024
22 August 2024
bore Manualer
- Flex
- Dedra
- Alpha Tools
- Hyundai
- Velleman
- Varo
- McKenzie
- RYOBI
- Spit
- Batavia
- Baumr-AG
- Maktec
- Yato
- Ridgid
- Blaupunkt
Nyeste bore Manualer
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
13 Oktober 2024
12 Oktober 2024
12 Oktober 2024
7 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024