La Crosse Technology 331-09667V2 Manual

La Crosse Technology Vejrstation 331-09667V2

Læs gratis den danske manual til La Crosse Technology 331-09667V2 (2 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9 anmeldelser. Har du et spørgsmål om La Crosse Technology 331-09667V2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Page 3 Page 4Page | 2

WIRELESS POOL THERMOMETER

INSTRUCTION MANUAL

Model: 331-1409/331-09667

DC:091021

For more product information visit: bit.ly/laxtech_support

P O W E R U P

1. Insert 2-AA batteries into the Pool Sensor’s Battery

Compartment. Securely reattach the twist-on Battery Cover,

ensuring the lines meet correctly to prevent water from entering.

2. Insert 2-AA batteries into the Pool Station.

3. Conﬁgure Basic Settings.

4. Once the sensor is reading to your pool station you can

place it in your pool.

S E T T I N G S

1. Hold the HI/LO button to enter the Settings Menu.

2. Press the + or - button to adjust values.

3. Press the HI/LO button to conﬁrm, move to the next item or exit.

Settings Menu Order:

• 12/24 Hour Format

• Hour

• Minutes

• Fahrenheit/Celsius

Pool Station

331-1409/331-09667

HOUR MINUTES

FAHRENHEIT

CELSIUS

12 or

24 HOUR

Pool Sensor

LTV-POOL

Antenna

Battery

Compartment

(Slides Out)

Battery Cover Note: Battery Compartment slides out

partway to insert batteries.

B U T TO N F U N C T I O N S

V I E W I N D O O R TE M P E R AT U R E / H U M I D I T Y

• Press the button to toggle between Indoor Temperature and

Indoor Humidity readings, or activate Auto-Scroll.

• When the Auto-Scroll Icon appears in the bottom right corner,

the display will switch between these readings every 5 seconds.

A D D - O N T E M P E R AT U R E / H U M I D I T Y S E N S O R

To add an add-on sensor (sold separately) to this 331-1409 display:

1. Insert 2-AA batteries into the new TH sensor.

2. Hold the button to search for the sensor.

3. Press the TX button on the sensor to force a signal.

Pool Sensor showing Add-on Sensor showing

The Pool Icon shows when pool sensor is displayed.

The Sensor Icon shows when the add-on sensor is displayed.

Press to toggle between Pool and add-on TH sensor, or to activate

Auto-Scroll to cycle every ﬁve seconds. Hold to search for all sensors.

Press to view HI/LO records. All HI/LO record reset at midnight each day.

Hold to enter Settings Menu.

In Settings Menu, press to decrease

settings. Hold to decrease quickly.

When viewing HI/LO records, hold to reset record.

Press to toggle between Indoor Temperature and Indoor Humidity, or

activate Auto-Scroll to cycle every ﬁve seconds.

Page 6Page 5 Page 7 Page 8

LO W B AT T E R Y I N D I CATOR S

When a Low Battery Indicator appears by the time, replace the

batteries in the Pool Station

When a Low Battery Indicator appears by the Pool Sensor,

replace the batteries in the Pool Sensor.

CONNECT TO LA CROSSE VIEW APP™

If you require additional support, get in touch with our friendly

customer support team based out of La Crosse, Wisconsin.

Phone: 1.844.200.8752

Online: bit.ly/contact_techsupport

Our knowledgeable customer support team is available:

Monday-Friday, 8am-6pm CST.

JOIN TH E CONVE R S ATION

Ask questions, watch detailed setup videos, and provide feedback

on our social media outlets!

W E ’ R E H E R E TO H E L P

S PE C I F I C AT I ON S

Pool Sensor (LTV-POOL):

Temperature Range: 50°F to 122°F (Fahrenheit only)

Transmission Range: Over 330 ft. (100 meters) RF 915MHz (open air)

Transmission Interval: About every 60 seconds

(samples every 30 seconds)

Power: 2-AA, IEC, LR6 batteries (not included)

Battery Life: Over 24 months

Dimensions: 6.67‘’ L x 3.87’’ W x 4.18’’ H (16.95cm L x 9.84cm W x 10.61cm H)

Pool Station (331-1409):

Temperature Range: 32°F to 122°F (0ºC to 50ºC)

Humidity Range: 10% to 99% RH

Power: 2-AA, IEC, LR6 batteries (not included)

Battery Life: Over 12 months

Dimensions: 3.55” L x 1.19” W x 3.35” H (9.02cm L x 3.02cm W x 8.52cm H)

WA R R A N T Y I N F O

La Crosse Technology, Ltd. provides a (from date of purchase) on this product 1-year limited time warranty

relating to manufacturing defects in materials & workmanship.

La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601

For Full Warranty Details, Visit: www.lacrossetechnology.com/support

F C C S TAT E ME N T

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also

complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with

provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any

other antenna or transmitter. End-users and installers must be provided with antenna installation instructions

and consider removing the no-collocation statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

WARNING: This product can expose you to chemicals including styrene,

which is known to the State of California to cause cancer.

For more information go to: www.P65Warnings.ca.gov

using electronic, mechanical or chemical process without the written permission

of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and corrections

are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or

their consequences. All trademarks and patents are recognized.

C A R E + M A I N T E N A N C E

• Do not mix old and new batteries.

• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.

• Always purchase the correct size and grade of battery most suitable for intended

use.

• Clean the battery contacts and also those of the device prior to battery

installation.

• Ensure the batteries have with correct polarity (+ / -).

• Remove batteries from equipment that will not to be used for an extended period.

• Promptly remove expired batteries.

If you already own a La Crosse View connected display,

you can use your La Crosse View app to monitor your Pool

Sensor’s readings, as well as set temperature alerts right on

your phone.

1. Open your La Crosse View app and select ADD DEVICES

from the main menu.

2. Scan the Bar Code or type in the Device ID on the

side of the Battery Compartment.

3. Give the device a Name and Location, and press Save.

Within the next few minutes you should begin seeing your

Pool Sensor’s data within your app.

Note: The LTV-POOL sensor is fully functional without being

connected to the La Crosse View app.

HI/LO TEMPERATURE AND HUMIDTY READINGS

• Press the HI/LO button to view HI and LO records.

• The HI/LO Record from the pool sensor are constantly displayed.

• The records will reset automatically each day at midnight.

• To manually reset the HI/LO records press the HI/LO button to

view the records. Then hold the (-) MINUS button to reset each

record individually when viewed.

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Vejrstation
Model:	331-09667V2

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 331-09667V2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vejrstation La Crosse Technology Manualer

La Crosse Technology TX145WSDR Manual

31 Juli 2025

La Crosse Technology 328-1415 Manual

31 Juli 2025

La Crosse Technology 308-1711BLV3 Manual

31 Juli 2025

La Crosse Technology 308-10847 Manual

21 Juli 2025

La Crosse Technology CA73071 Manual

4 Marts 2025

La Crosse Technology M71633 Manual

8 Januar 2025

La Crosse Technology V41CA Manual

8 Januar 2025

La Crosse Technology CA74177 Manual

26 December 2024

La Crosse Technology S73071 Manual

26 December 2024

La Crosse Technology 308-1415FCT-NH Manual

26 December 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

Hyundai WS 2303 Manual

10 August 2025

TFA 30.3039 Manual

8 August 2025

TFA Linea Plus 35.1144.01 Manual

7 August 2025

TFA 98.1111.02 Manual

7 August 2025

TFA 30.3900.02 Manual

7 August 2025

TFA View 35.1142 Manual

7 August 2025

Brandson 307346 Manual

5 August 2025

Techno Line WS 9130 Manual

3 August 2025

Theben LUXORliving M140 Manual

3 August 2025

Techno Line WS 9215 Manual

3 August 2025