La Crosse Technology 404-3556A Manual


Læs gratis den danske manual til La Crosse Technology 404-3556A (4 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om La Crosse Technology 404-3556A, eller vil du spørge andre brugere om produktet?

Side 1/4
La Crosse Technology, Ltd Page 1
404 3556A- FAQ S
The links below will work in most PDF viewers and link to the topic area by clicking the link.
We recommend Adobe Reader version 10 or greater available at:
http://get.adobe.com/reader
CON TENTS
404-3556A FAQS ................................................................................................................. 1
Batteries ............................................................................................................................... 2
Battery Life 2 ..........................................................................................................................
Atomic Clock Factory Restart ............................................................................................ 2
Supported Time Zones ....................................................................................................... 2
Time is Incorrect ................................................................................................................. 2
Clock is incorrect by Hours but minutes are correct..................................................... 2
Daylight Saving Time ......................................................................................................... 3
Manually Set Time .............................................................................................................. 3
How long will the battery last? ......................................................................................... 3
Can I shut off the WWVB signal? ..................................................................................... 3
Is there a booster antenna to receive the WWVB signal in a difficult location? ...... 3
Can I wire a control timing circuit to the La Crosse Technology
® atomic clock? ..... 3
Why do the hands spin once or twice everyday? .......................................................... 3
Hands spin non-stop 3 ..........................................................................................................
Hands jumps or jerks around the dial ............................................................................. 4
Hands stuck at certain time .............................................................................................. 4
Hands are loose. ................................................................................................................. 4
Position the Clock 4 ...............................................................................................................
How do I adjust the Temperature or Humidity? ............................................................ 4
La Crosse Technology, Ltd Page 2
BATTERIES
Explanation: Many problems are resolved with fresh batteries of the appropriate voltage.
Many items sent in under warranty work when tested with fresh batteries. Batteries
manufactured this year will have an expiration date 10 years (or more) in the future.
Battery technology has improved and batteries will maintain voltage longer in storage.
However, the environment the batteries reside in for the 10 years can deplete the power.
We suggest a name- brand Alkaline battery.
A minimum voltage of 1.48V is necessary for proper performance.
Use a battery dated at least six years in advance of the current year. Batteries dated
earlier than six years from now may still work, but may be unstable in performance.
Good name-brand batteries make less noise, which reduces the chance of RF (radio
frequency) interference from the battery compartment.
BATTERY LIFE
Battery life is over 12 months with one battery . in the movement
Battery life can be up to 3 years with two additional batteries in the side compartments.
ATOMIC C LOCK FACTORY RESTART
Explanation: - - -The factory restart returns the atomic clock to an “out of the box” state and
often resolves an issue.
Factory Restart:
1. Remove all batteries from the clock for 15 minutes.
2. Press the Manual Set Tab at least 20 times to clear all memory.
3. Insert fresh Alkaline battery into the clock.
4. The hands will spin to 12:00, 4:00 or 8:00 and wait for the WWVB time signal.
SUPPORT ED TIME ZONES
This atomic clock offers 4 time zones: Pacific, Mountain, Central and Eastern.
La Crosse Technology® does not make an analog clock with more than four time zones.
The s atomic clock work in North America.
Outside of North America, the atomic clock will not receive a WWVB signal, but will keep
time like a quartz clock . if manually set
TIME IS INCORRECT
Indicative of non- receipt of WWVB signal
Electrical storms between you and Colorado can interfere with the WWVB signal
Replace battery and perform restart procedure. Allow up to 5 days to receive a signal.
Reposition the with the front or back facing Colorado.atomic clock
Try a different location, ideally near a window. The clock should be at least six feet from
computers, TVs, air conditioners, other atomic clocks and other electrical appliances that
cause interference.
Large buildings, metal roofed buildings and buildings or rooms full of electrical and/or
radio equipment make it difficult to receive the WWVB time signal.
CLOCK IS INCORRECT BY HOURS BUT MINUTES ARE CORRECT


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Ur
Model: 404-3556A

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 404-3556A stil et spørgsmål nedenfor, og andre brugere vil svare dig