La Crosse Technology 433-3256A Manual

La Crosse Technology Ur 433-3256A

Læs gratis den danske manual til La Crosse Technology 433-3256A (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6 anmeldelser. Har du et spørgsmål om La Crosse Technology 433-3256A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

2 1 ” I N D O OR | O U T D O O R

ATO M I C WA L L C LOC K

Model: 433-3256A

DC: 092619

For information about WWVB, Atomic Time Signal visit: bit.ly/AtomicTime

Page | 1Page | 4

WA R R A N T Y I N F O

La Crosse Technology, Ltd. provides a (from date of purchase) on this 1-year limited time warranty

product relating to manufacturing defects in materials & workmanship.

La Crosse Technology, Ltd

2830 S. 26th St.

La Crosse, WI 54601

For Full Warranty Details, Visit: www.lacrossetechnology.com/support

C A R E + M A I N T E N A N C E

• Do not mix old and new batteries.

• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.

• Always purchase the correct size and grade of battery most suitable for intended use.

• Clean the battery contacts and also those of the device prior to battery installation.

• Ensure the batteries have with correct polarity (+ / -).

• Remove batteries from equipment that will not to be used for an extended period.

• Promptly remove expired batteries.

F C C S TAT E M E N T

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

• Increase separation between equipment & receiver.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Operation is subject to the following two conditions:

(1 ) This device may not cause harmful interference, and (2) This device must accept any interference

received, including interference that may cause undesired operation.

CAUTION!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes

or modifications to this equipment. Such changes or modifications could void the user authority to

operate the equipment.

processed using electronic, mechanical or chemical process without the written permission

of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and

corrections are included in subsequent editions. We disclaim any responsibility for any technical error

or printing error, or their consequences. All trademarks and patents are recognized.

WARNING: This product can expose you to chemicals including styrene, which is known to the

State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov

POWE R U P

1. Remove the round Battery Cover and insert 1 AA battery into the

Center Battery Compartment. Optional: Insert batteries into the Extra

Battery Compartments. IMPORTANT: Be sure all batteries are of the

same voltage level.

2. The hands will move to the 4, 8, or 12 o’clock position and stay there

while it searches for the WWVB Atomic Time Signal. Allow up to 5

nights for the clock to receive this transmission.

3. For the best reception, place the clock on an exterior wall near a

window with the front or back of it facing Fort Collins, CO.

4. Once the Atomic Time Signal is received, the clock will set to Paciﬁc

Time. Firmly press and hold your correct Time Zone Button until the

hands begin to spin. The time will then set correctly.

5. If you live in an area that does not follow Daylight Saving Time, while

the hands are spinning to the correct time, press the Daylight Saving

Time Button once to turn the DST setting to OFF.

Watch the setup video: bit.ly/wallclock_setup

Note: In certain areas, this clock may not be able to receive the WWVB

reception due to signal strength or interference. In this case, your clock

can be set manually until the Atomic Time Signal can be received.

Manual Set Tab

Center Battery

Time Zone Buttons

Daylight Saving Time Button

(Default is DST ON)

1. Remove all batteries from the clock.

2. Press the Manual Set Tab at least 20 times and wait 15 minutes.

3. Insert at least one battery into the Center Battery Compartment.

4. Allow the hands to spin around and stop in either the 4, 8, or 12

o’clock position.

5. Hold the Manual Set Tab until your correct time is achieved.

Note: The Atomic Time Signal will override your manual setting if the

transmission is received in the future.

MA NUAL LY S E T TI M E

Ask questions, watch detailed setup videos, and provide feedback on

our social media outlets!

LE T’S BE S OCI AL !

Page | 3Page | 2

Battery Requirements: 1 AA (IEC LR6) required in movement

Optional: 2 AA (IEC LR6) for added battery life

All batteries sold separately.

Battery Life: 1 Battery - 12 months, 3 Batteries - 36 months

Temperature Range: Humidity Range: -40°F to 140°F 0% to 100% RH

S P E CI F I C AT I ON S

5Optional:

Extra Battery Compartments

PT MT CT ET

+ +

- - 4

• Your thermometer and hygrometer have been pre-calibrated and

should not need adjustment.

• Before manually adjusting your sensors, allow the clock to sit at room

temperature for 2 hours.

• To manually adjust your sensors, gently turn the temperature or

humidity sensor adjustment on the back of the clock until desired

setting is reached.

Thermometer/Hygrometer

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Ur
Model:	433-3256A

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 433-3256A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur La Crosse Technology Manualer

La Crosse Technology 404-2658-INT Manual

4 Marts 2025

La Crosse Technology WT-8112U Manual

12 Januar 2025

La Crosse Technology WT-3145U Manual

10 Januar 2025

La Crosse Technology 404-3025W Manual

8 Januar 2025

La Crosse Technology 25201 Manual

30 December 2025

La Crosse Technology 25509 Manual

30 December 2025

La Crosse Technology 404-3025B Manual

26 December 2024

La Crosse Technology 20802 Manual

26 December 2024

La Crosse Technology 513-23137 Manual

26 December 2024

La Crosse Technology WT-8005U Manual

5 December 2024

Ur Manualer

Nyeste Ur Manualer

Orient Contemporary ER1U002B Manual

9 Juni 2025

Orient Sports UG1X007B Manual

8 Juni 2025

Orient Sports UY07001D Manual

8 Juni 2025

Orient Classic RA-KA0007L Manual

7 Juni 2025

Orient Contemporary ER2G002B Manual

7 Juni 2025

Orient Contemporary UNA1003B Manual

6 Juni 2025

Orient Contemporary ER1Y001W Manual

6 Juni 2025

Orient Contemporary SZ3N009W Manual

6 Juni 2025

Swatch Climber SFK300G Manual

6 Juni 2025

Orient Contemporary UNG8003W Manual

6 Juni 2025