La Crosse Technology 512-807 Manual


Læs gratis den danske manual til La Crosse Technology 512-807 (14 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om La Crosse Technology 512-807, eller vil du spørge andre brugere om produktet?

Side 1/14
1
Manual
Introduction
The Wireless Weather Station with Digital Barometer oers radio-controlled time,
weather forecast, and indoor and outdoor temperature on one easy to read display.
ATOMIC WEATHER STATION:
Time WWVB Perpetual
Reception icon Calendar
Channel indicator
Transmitter low
battery indicator
Forecast icon
-hour pressure 12
history graph
Current pressure
Temperature
trend indicators
Outdoor temperature Indoor temperature
2
FEATURES:
Six digit time display
Atomic time and date with manual set option
Automatically updates for Daylight Saving Time (on/o option)
12-hour or 24-hour selectable time
Barometric pressure with 12-hour history graph.
Forecast icons: sunny, partly cloudy, cloudy, rainy and stormy.
Time Alarm
Perpetual calendar.
Indoor temperature (°F or °C)
Outdoor temperature (°F or °C)
Can read up to 3 outdoor sensors
Temperature trend indicators for indoor and outdoor temperature: up, steady, down.
Minimum and Maximum indoor and outdoor temperature
Wall hanging or free standing
Low battery indicator for receiver and transmitter
100 foot wireless transmission range (open air)
SET UP:
IMPORTANT: Do not mix old and new batteries.
Remove the screws and the battery cover from the back of the transmitter with a small
screwdriver. (see install batteries in transmitter).
Set the transmitter to Channel 1.
: if you have additional transmitters set them to channel 2 and channel 3 respectively. NOTE
Insert fresh alkaline batteries into the transmitter, observing the correct polarity (see marking
inside battery compartment). Keep the transmitter 5-10 feet from the weather station.
Select Fahrenheit or Celsius for the sensor display.
Within 30 seconds of powering up the transmitter, insert batteries into the Weather station,
observing the correct polarity Once the (see install batteries in the weather station).
batteries are in place, all segments of the LCD will light up briey. Following the indoor
temperature will be displayed. If the indoor temperature is not shown in the LCD after 60
seconds, remove the batteries and wait for at least 60 seconds before reinserting them.


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Ur
Model: 512-807

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 512-807 stil et spørgsmål nedenfor, og andre brugere vil svare dig