La Crosse Technology 926-25100-WGB Manual

La Crosse Technology Ikke kategoriseret 926-25100-WGB

Læs gratis den danske manual til La Crosse Technology 926-25100-WGB (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om La Crosse Technology 926-25100-WGB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Page | 4

Temperature/Humidity Sensor Set

Model: TX60U-IT

DC: 041318

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date

of purchase) on this product relating to manufacturing defects in materials &

workmanship. Before returning a product, please contact our friendly customer

support with questions or visit our online help:

Phone: 1-608-785-7920

Online Product Support and Registration:

https://www.lacrossetechnology.com/support/lacrossealertsmobile/

WARRANTY AND SUPPORT

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modiﬁcations to

this equipment. Such changes or modiﬁcations could void the user authority to operate the equipment.

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be

co-located or operating in conjunction with any other antenna or transmitter

electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain

errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions.

We disclaim any responsibility for any technical error or printing error, or their consequences.

All trademarks and patents are recognized.

CONTENTS NOT INCLUDED

1. Sensor TX60U-IT

2. Screws & anchors

3. GW1000-U gateway, power cord,

and LAN cable

• High speed INTERNET service

and router to connect gateway

• Mobile device with cellular

or WiFi service to use app

• Optional Probe-

(wet, dry, or threaded)

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

Google Play and the Google Play logo are trademarks of Google Inc.

Page | 2 Page | 3

SETUP

1. Connect gateway to router.

2. Insert power cord into outlet and into

gateway.

3. Wait for 4 red blinks

4. Insert 2 AAA batteries into sensor.

Observe correct polarity.

5. Download La Crosse Alerts Mobile App.

6. Follow the on screen instructions.

AAA

GATEWAY LIGHTS

4 BLINKS: Ready to register

3 BLINKS: Cannot ﬁnd server

2 BLINKS: No IP address

1 BLINK: Check LAN cable

NO LIGHT: Check power cord

RED/GREEN LIGHTS BLINK:

Delete existing registration

SOLID RED: Registered

FACTORY RESET

Gateway:

1. Remove power cord

2. Hold gray button & insert power cord

3. Continue to hold until red light ﬂashes twice. Release button.

4. When light ﬂashes 4 times, register.

Sensor:

1. Hold gray button on sensor until sensor display resets.

• Do not mix old and new batteries.

• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.

• Always purchase the correct size and grade of battery most suitable

for intended use;

• Clean the battery contacts and also those of the device prior to

battery installation;

• Ensure the batteries have with correct polarity (+ / -)

• Remove batteries from equipment that will not to be used for an

extended period.

• Promptly remove expired batteries.

CARE AND MAINTENANCE

• Temperature: -40ºF to 140ºF (-40ºC to 50ºC)

• Humidity: 3% RH to 99% RH

• Probe Temperature: -40ºF to 140ºF (-40ºC to 50ºC)

• Transmission: 200 ft. (60.96m) in open air

• Battery Requirements: Sensor: 2 “AAA” (LR3) battery (not included)

• Dimensions: 1.44” L x 0.76” W x 5.73” H (3.66 L x 1.93 W x 14.55 H cm)

System Requirements:

• iOS 8 or greater is required with a Safari browser

• Android 4.0.3 or greater is required with Chrome or Stock browser

Browser:

• Mac supported versions (min) OSX 10.8, 10.9 or 10.10 with Safari 6.1.1+,

Chrome 36+ or Firefox 39+

• Windows supported versions (min) 7/SP1, 8.1/Update 1, or 10 (Pro/Home)

with Chrome 36+, Firefox 39+ or Internet Explorer 10/11.

SPECIFICATIONS

Setup Video: www.lacrossetechnology.com/support/lacrossealertsmobile/

WARNING: This product can expose you to chemicals including

styrene, which is known in the State of California to cause cancer.

For more information go to: www.P65Warnings.ca.gov

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Ikke kategoriseret
Model:	926-25100-WGB

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 926-25100-WGB stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret La Crosse Technology Manualer

La Crosse Technology LTV-WSDTH04 Manual

23 September 2024

La Crosse Technology WT-137U Manual

13 September 2024

La Crosse Technology WT-2191A Manual

10 September 2024

La Crosse Technology V16 Manual

9 September 2024

La Crosse Technology V61-11 Manual

7 September 2024

La Crosse Technology WS-9410U Manual

31 August 2024

La Crosse Technology TX60U-IT-D Manual

31 August 2024

La Crosse Technology TX141V4 Manual

29 August 2024

La Crosse Technology 724-1409 Manual

28 August 2024

La Crosse Technology LTV-R1 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo DFM-32-100-B-PPV-A-KF Manual

17 Juni 2025

Playtive IAN 285777 Manual

17 Juni 2025

Festo VAEM-L1-S-M3-26 Manual

17 Juni 2025

Festo DFPC-320 Manual

17 Juni 2025

EFX ICAK12 Manual

17 Juni 2025

Bearware 307294 Manual

17 Juni 2025

Futaba MC-9200H/A Manual

17 Juni 2025

Hansgrohe AXOR Montreux 16517800 Manual

17 Juni 2025

OmniMount 2N1-S Manual

17 Juni 2025

Festo DSNU-S-12- -F1A Manual

17 Juni 2025