La Crosse Technology BBB87740X1 Manual


Læs gratis den danske manual til La Crosse Technology BBB87740X1 (18 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om La Crosse Technology BBB87740X1, eller vil du spørge andre brugere om produktet?

Side 1/18
Model: BBB87740x1 www.lacrossetechnology.com/support Page | 1
Model: BBB87740x1
Instruction Manual
DC: 042016
18” Indoor/Outdoor Atomic Wall Clock
Get Started
1: Remove the round battery cover from the back of the clock.
2: Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery according to the
polarity marked on the case.
OPTIONAL: For extended battery life, install two additional batteries to
the sides of the movement.
3: Firmly press the time zone button once. Replace battery cover.
4: , Position the clock on an exterior wall that faces Ft. Collins Colorado.
During the night, your clock will automatically set itself.
Note: The hands will move to the 12:00, 4:00 or 8:00 position and search
for the radio signal. If the radio signal the time will set If the is received .
signal is not received the clock will stay at the 12:00, 4:00 or 8:00
position and search for the WWVB time signal on the even hours. Once
the radio signal is decoded, the hands will automatically adjust to the
correct time. This may take up to 5 nights.
Round
Battery
Cover
Model: BBB87740x1 www.lacrossetechnology.com/support Page | 2
5: The default time zone is Pacific . If the clocks sets itself and Time
the hours are off, hold the correct time zone button for 5 seconds
to correct.
Position Clock
Indoor: Choose a location 6 feet or more from electronics such as
cordless phones, wireless gaming systems, televisions, microwaves,
routers, baby monitors, etc., which can prevent signal reception.
, CPosition near an exterior wall that faces Ft. Collins olorado for
WWVB time signal reception.
The antenna is available for signal reception when the front or back
of the clock faces Colorado.
Outdoor: Choose a location with an overhang to protect the clock
from the overhead sun or standing snow or rain.
A shaded location will prevent inaccurate temperature readings.
Mount the clock on a wall with the hanging hole on the back of the
clock. Be sure the battery cover is on snug.
Manual Set Time
On rare occasions in certain areas, the clock may not be able to receive
the radio controlled time signal due to the strength of the signal or the
geographic location.
In this case, the clock can be set manually and used as a regular quartz
wall clock.
N :ote Allow up to five nights for the clock to receive the WWVB signal
before manually setting the time.
Da aylight S ving
Time Indicator
Time Zone Buttons
Time Set Tab
3 Battery
Compartments


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Ur
Model: BBB87740X1

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology BBB87740X1 stil et spørgsmål nedenfor, og andre brugere vil svare dig