La Crosse Technology LTV-TH2I Manual


Læs gratis den danske manual til La Crosse Technology LTV-TH2I (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om La Crosse Technology LTV-TH2I, eller vil du spørge andre brugere om produktet?

Side 1/3
Model: LTV-TH2
DC: 083017
Thermo-hygro Sensor
Power & Mounting
LED Light
AA
+-
AA
+-
Battery Cover
Hole for
mounting
TX F/C
∙ Press TX to send a signal
∙ Press F/C to select Fahrenheit
or Celsius display on sensor.
1. Install 2-AA batteries according to polarity and replace battery cover. The blue LED light will flash
when transmitting.
Mounting:
1. Use the hole at the top to hang your sensor from the back using a nail. Or, insert one mounting screw
through the front of your sensor.
2. Mount your sensor on a north-facing wall or in any shaded area. Under an eave or deck rail is
preferred to avoid inaccurate readings from the sun.
3. The maximum wireless transmission range to the weather station is up to 400 feet (121 meters) in open
air, not including walls or floors.
4. Be sure your sensor is mounted vertically, to allow moisture to drain out properly.
Note: Watch sensor mounting video: http://bit.ly/TH_SensorMounting


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Ikke kategoriseret
Model: LTV-TH2I

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology LTV-TH2I stil et spørgsmål nedenfor, og andre brugere vil svare dig