La Crosse Technology LTV-WL1 Manual

La Crosse Technology Ikke kategoriseret LTV-WL1

Læs gratis den danske manual til La Crosse Technology LTV-WL1 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10 anmeldelser. Har du et spørgsmål om La Crosse Technology LTV-WL1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Model: LTV-WL1

DC: 102522

SPOT WATER LEAK SENSOR

LED

Light

Transmission button (TX)

Bar code

ID number

REMOTE MONITORING WITH WIFI

Beneﬁts of connecting your sensor to the La Crosse View™ app:

• When the sensor is connected to the La Crosse View app, you’ll have access to its status anywhere

on the go.

• You can even setup alerts which will send you push notiﬁcations for when water is detected, when

water is no longer detected, the connection is lost, or when the sensor’s batteries are low.

• This information can also easily be shared with friends and family.

POSITIONING

• The sensor will work best when simply placed on a ﬂoor. It will begin to detect water at 0.031 inches

(0.787mm).

• If sensor is placed vertically (Ex: hung inside a sump pump) the depth of the water needs to be at

least 0.25 inches (6.35mm) high to trigger the sensor.

IMPORTANT: The metal contacts on the sensor should not be in contact with other metal. This will cause

false WET readings and may damage the sensor.

Water Sensor

Hanging Hole

Page | 2

POWER & LED LIGHT COLORS

Power:

1. Remove the front cover by twisting counter-clockwise to the unlock position.

2. Insert 2 fresh AA batteries according to the polarity markings. The LED light will ﬂash blue when

batteries are inserted.

3. Replace front cover and turn clockwise to locked position.

LED Colors:

BLUE LED: Normal Transmission. The LED light will occasionally ﬂash blue, indicating it is still

transmitting correctly and that no water has been detected. Press the TX button inside the front cover to

force a transmission at any time.

RED LED: Water detected. The LED light will ﬂash red twice every 5 seconds until dry. When water is no

longer detected, the light will reduce in frequency and revert back to ﬂashing blue to indicate

transmission.

PURPLE LED: Battery is low. When the batteries need to be replaced, the LED light will ﬂash purple 5 times

every 30 seconds. (Purple) will ﬂash once every second for 5 seconds.

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Ikke kategoriseret
Model:	LTV-WL1

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology LTV-WL1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret La Crosse Technology Manualer

La Crosse Technology LTV-WSDTH04 Manual

23 September 2024

La Crosse Technology WT-137U Manual

13 September 2024

La Crosse Technology WT-2191A Manual

10 September 2024

La Crosse Technology V16 Manual

9 September 2024

La Crosse Technology V61-11 Manual

7 September 2024

La Crosse Technology WS-9410U Manual

31 August 2024

La Crosse Technology TX60U-IT-D Manual

31 August 2024

La Crosse Technology TX141V4 Manual

29 August 2024

La Crosse Technology 724-1409 Manual

28 August 2024

La Crosse Technology LTV-R1 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo VYKB-F10-M32-16-PF-1HPA Manual

17 Juni 2025

Premium Levella PCO1204B Manual

17 Juni 2025

Tekron NTS 03-G+ Manual

17 Juni 2025

A.H. Beard Enliven 2 Manual

17 Juni 2025

Festo EPCE-TB-45-50-FL-MF-ST-M-H1-PLK-AA Manual

17 Juni 2025

Festo DFPC-200-400-D Manual

17 Juni 2025

Playtive HG05214 Manual

17 Juni 2025

Philips AVENT SCF173 Manual

17 Juni 2025

OmniMount ShadowBox SB1R Manual

17 Juni 2025

Hansgrohe AXOR Uno 45004330 Manual

17 Juni 2025