La Crosse Technology M76171 Manual

La Crosse Technology Vejrstation M76171

Læs gratis den danske manual til La Crosse Technology M76171 (2 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 71 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 36 anmeldelser. Har du et spørgsmål om La Crosse Technology M76171, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
C O LO R W E AT H E R S TAT I O N
MODEL: M76171
DC: 071321
P O W E R U P
1. Insert 2-AAA batteries into your Outdoor Sensor.
2. Insert the 5.0 volt USB power cord into an outlet, then into the side of
your Weather Station. Optional: Insert 2-AAA batteries into your station.
3. Adjust time and date settings on the station.
4. Once the Outdoor Sensor is reading to your station, place it outside in a
shaded location.
Watch our sensor mounting video: bit.ly/th_sensor_mounting
Outdoor Sensor
SH006T
Weather Station
M76171
S E T T I N G S A L A R M
AAA
AAA
AAA
AAA
B AC K L I G H T
Power Cord:
• Hold the ON/OFF/BL button for 3 seconds, until the Station beeps, to
turn the continuous Backlight OFF.
• Hold the ON/OFF/BL button again for 3 seconds, until the Station beeps,
to turn continuous Backlight ON.
• When the Backlight is o, press any button to turn on the backlight for 8
seconds.
Batteries Only: Press any button to activate the backlight for 8 seconds.
1. Press the button so the word “TIME” shows in front of the SET/AL SET
time.
2. With the word “TIME” showing, hold the button to enter the SET/AL SET
main Settings Menu.
3. Once the settings begin flashing, let go of the button and SET/AL SET
use the buttons to adjust, and to confirm or exit.ARROW SET/AL SET
Settings Menu order:
• 12/24 Hour Time • Hour • Minute • Year • Month • Date • Language
(ENG, GER, FRE, SPA, ITA, DUT, DAN)
Language: When another language is selected, the weekday and menu
items will be presented in that language.
Weekday: Weekday sets automatically when Year, Month and Date are
set.
FA H R E N H E I T O R C E LC I U S
Press the ºF/ºC button to select Fahrenheit or Celsius temperature display.
MEM
/RCC BARO
SET/AL SET
�\� [�< �\� S�S�$� O�Y
C/ F
B A R O M E T R I C P R E S S U R E
View Pressure:
Press the button to view the Barometric Pressure in the time area. BARO
Change Pressure Value:
1. Hold the button for 3 seconds to enter Bormetric Pressure BARO
Settings.
2. Use the buttons to adjust the value, then press the BARO ARROW
button to save and exit.
1. Press the button so the word “ALARM” shows in front of the SET/AL SET
time.
2. With the word “ALARM” showing, hold the SET/AL SET button to enter
Alarm Settings.
3. Use the ARROW buttons to adjust, and to confirm and SET/AL SET
exit.
Alarm Menu order:
• Hour
• Minute
Activate/Deactivate Alarm:
Setting the alarm time and activating the alarm are separate actions.
1. Press the button so the word “ALARM” shows in front of the SET/AL SET
time.
2. Use the ARROW buttons to turn the alarm ON or OFF. When the
alarm is active the Alarm Icon will show.
Silence Alarm for 24-hours:
• When the alarm sounds, press any button to silence the alarm for
24-hours.
• The Alarm Icon will continue to show.
Alarm ON Alarm OFF
Page | 2 Page | 3 Page | 4
S P E C I F I C ATI O N S
Weather Station M76171:
Temperature Range: 14F to 122F (-10C to 50C)
Humidity Range: 20% to 95% RH
Power Requirements: 5V/1A USB Power Cord (LX050100)
Optional: 2 “AAA” LR3 Batteries (not included)
Battery Life: Over 12 months with reputable batteries
Dimensions: 6.88” x 1.18” x 3.18” (17.5 cm x 3.0 cm x 8.1 cm)
Outdoor Sensor SH006T:
Temperature Range: -40°F to 140F (-40°C to 60°C)
Humidity Range: 20% to 95% RH
Transmission Range: Over 197 feet (60 meters) in open air RF 433MHz
Update Interval: About every 50 seconds
Power Requirements: 2 “AAA” LR3 Batteries (not included)
Battery Life: Over 12 months with reputable batteries
Dimensions: 4.72” x 0.79” x 1.77” (12.0 cm x 2.0 cm x 4.5 cm)
LOW B AT T E R Y I N D I C ATO R
• When the Battery Indicator shows next to the outdoor temperature,
replace batteries in the Outdoor Sensor.
• When the Battery Indicator shows next to the indoor temperature,
replace batteries in the Weather Station.
The MIN/MAX readings are all time values from when the station was first
powered on or last reset.
1. Press the button to view indoor & outdoor MAX records.MEM
2. Press again to view MIN records.MEM
Reset Records:
1. Press the button to view records.MEM
2. Hold the button to reset all Indoor and Outdoor records to MEM
current readings.
M I N / M A X R E A D I N G S B U T TO N F U N C T I O N S
WA R R A N T Y I N F O
This product is warranted to be free from defects in material and workmanship under normal use and service
for a period of one year from the date of sale to the customer. Warranty will not apply to defects resulting from
abuse, accidents, or misuse. If a defect that is covered by this warranty arises during the warranty period,
promptly return the clock (postage prepaid) with proof of purchase showing the date the weather station was
purchased to the following address and such defects will be repaired, or the products will be replaced at
La Crosse Clock Company option without charge.
La Crosse Clock Company, Warranty Department, 2830 South 26 th Street., La Crosse, WI 54601
CA R E + M A I N T E N A N C E
• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries have with correct polarity (+ / -).
• Remove batteries from equipment that will not to be used for an extended period.
• Promptly remove expired batteries.
F C C S TAT E M E N T
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION! Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences. All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the
State of California to cause cancer. For more information go to: www.P65Warnings.ca.gov
If you require additional support, get in touch with our friendly customer
support team based out of La Crosse, WI.
Phone: 1-608-782-1610
Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JO IN T HE CO NVERSATIO N
Ask questions, watch detailed setup videos, and provide feedback on our
social media outlets!
W E ’ R E H E R E TO H E L P !
S E A R C H F O R O U T D O O R S E N S O R
C H A N N E L I N D I C ATO R
• If the sensor loses connection to the station for any reason, the station
will show dashes after 3 minutes.
• To search for your Outdoor Sensor, hold the button until the /CH
Reception Icon animates.
• When the sensor is connected, the Reception Icon will flash once
when new signal is received.
• If your outdoor sensor is unable to reconnect on its own, a reset of your
station may be necessary. Use a paper clip to press the button on RST
the back of the station.
• This station can show data for up to 3 remote sensors. The Channel
Indicator will highlight which sensor data is being displayed.
• The Channel Number on the station should match the Channel
selected on the sensor.
• The Auto-scroll Icon shows when the station cycles through all three
channels. Press the button to start or stop the auto-scroll. /CH
Visit www.lacrossetechnology.com for add-on sensor availability.
SET/AL SET Press to select Time or Alarm Mode.
Hold to enter Time or Alarm Settings.
Press to view Sensor Channels or initiate the Auto-scroll feature.
Settings Menu: Press to increase values.
Alarm Menu: Press to activate/deactivate alarm.
Hold to search for Outdoor Sensor.
MEM Press to view indoor and outdoor MAX or MIN Records.
Hold to reset MAX and MIN Records.
BARO Press to view Barometric Pressure.
Hold to set Pressure Value.
Settings Menu: Press to decrease values.
Alarm Menu: Press to activate/deactivate alarm.
º ºF/ C
ON/OFF BL
Press to select Fahrenheit or Celsius Temperature Display.
Hold to turn Backlight OFF. Hold again to turn Backlight ON.
RST Press to Factory Reset Station
F O R E C A ST I C O N S
Five Forecast Icons use changing atmospheric pressure to predict your
weather conditions to come within the next 12 hours.
Page | 5 Page | 6 Page | 7 Page | 8

Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Vejrstation
Model: M76171

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology M76171 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vejrstation La Crosse Technology Manualer

La Crosse Technology

La Crosse Technology M73170 Manual

21 August 2025
La Crosse Technology

La Crosse Technology TX145WSDR Manual

31 Juli 2025
La Crosse Technology

La Crosse Technology 328-1415 Manual

31 Juli 2025
La Crosse Technology

La Crosse Technology 308-1711BLV3 Manual

31 Juli 2025
La Crosse Technology

La Crosse Technology 308-10847 Manual

21 Juli 2025
La Crosse Technology

La Crosse Technology CA73071 Manual

4 Marts 2025
La Crosse Technology

La Crosse Technology M71633 Manual

8 Januar 2025
La Crosse Technology

La Crosse Technology V41CA Manual

8 Januar 2025
La Crosse Technology

La Crosse Technology CA74177 Manual

26 December 2024
La Crosse Technology

La Crosse Technology S73071 Manual

26 December 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

Brandson

Brandson 305419 Manual

15 September 2025
Brandson

Brandson 306643 Manual

15 September 2025
Brandson

Brandson 304632 Manual

15 September 2025
Brandson

Brandson 304577 Manual

14 September 2025
Brandson

Brandson 304465 Manual

14 September 2025
Brandson

Brandson 305420 Manual

14 September 2025
Aldi

Aldi GT-WS-06s Manual

14 September 2025
Dexford

Dexford WSRC 2254 Manual

13 September 2025
Waldbeck

Waldbeck Huygens Manual

9 September 2025
Discovery

Discovery Report WA20-S Manual

9 September 2025