La Crosse Technology TX141W Manual


Læs gratis den danske manual til La Crosse Technology TX141W (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om La Crosse Technology TX141W, eller vil du spørge andre brugere om produktet?

Side 1/3
Wind Speed | Temperature | Humidity
Features
• Wind speed
• Replaceable wind cups
• Temperature | Humidity
• Updates every 30 seconds
• Red LED ashes with each transmission
1. Twist battery cover left to remove from sensor.
2. Insert two “C” batteries into the TX141W sensor
Twist
Left
Power
Wind Cups
Air Vents
Battery cover
Mounting Pole
Mounting Bracket
C
C
Red LED
Model: TX141W
DC: 030817
Replace Wind Cups
1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw on at side of stem
Specications
• Wind Speed Range: 0 - 99 mph (0-159 kMh)
• Temperature Range: -40°F to 140°F (-40°C to 60°C)
• Humidity Range: 10% - 99% (RH)
• Transmission Range: 330 ft (100 m) RF 433MHz open air
• Batteries: 2-C, IEC, LR14 batteries (not included)
• Battery Life: over 24 months with reputable batteries
• Dimensions: 18.57” H x 7.10” W x 7.10” D
(471.68 x 180.34 x 180.34 mm)
Flat Side Of
Stem Up
Insert and Attach
Flat End up
• For the most accurate wind speed readings, mount the TX141W
sensor as the highest object for 50 feet in all directions.
• Cups should be on the top of the sensor. Mount vertically.
• The maximum wireless transmission range to the wind station is
over 330 feet (100 meters) in open air, not including walls or trees.
1. Insert mounting pole into sensor.
2. Tighten screws
3. Insert bottom of pole into mounting bracket
4. Tighten knob to secure
5. Use screws through the bottom of the mounting bracket to attach.
6. The sensor can be mounted from the bottom or side.
Alternatively:
1. Insert your own mounting pole into
the sensor.
2. Tighten screws
3. Mounting bracket would not be used.
Note: Do not attempt to insert a pole into the hollow back of the
mounting bracket.
Position Wind Sensor


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Ikke kategoriseret
Model: TX141W

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology TX141W stil et spørgsmål nedenfor, og andre brugere vil svare dig