La Crosse Technology TX231RW Manual

La Crosse Technology Ikke kategoriseret TX231RW

Læs gratis den danske manual til La Crosse Technology TX231RW (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om La Crosse Technology TX231RW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Model: TX231RW

DC: 111116

Multi-sensor

Wind | Rain | Lightning

RESET

Drain vents for rain

sensor

Reset

button

Red LED

Light

Drain holes for

multi sensor

Rain funnel

(collector)

Wind

cups

Batteries

3-AA

Directional

Vane

Features

• Wind direction

• Wind speed

• Rainfall

• Lightning detection

• Solar Panel for extended

battery life

• Replaceable directional vane

• Replaceable wind cups

• Self-emptying rain sensor

• Updates every 30 seconds

Power

• Requires 3-AA batteries for operation.

• Solar panel extends battery life but cannot operate multi-sensor alone.

Replace Wind Cups

1. Loosen the screw on side of cups

2. Remove cups

3. Install new cups

4. Tighten screw on at side of stem

Replace Directional Vane

1. Loosen the screw on side of vane

2. Remove direction vane

3. Install new vane

4. Tighten screw on at side of stem

Clean Rain Sensor

1. Remove rain funnel (pull at side rmly upward).

2. Gently remove debris or insects inside the rain sensor.

3. Clear debris from drain vents.

4. Clear debris from the rain funnel.

5. Reinstall the rain funnel.

Note: Do not oil the rain sensor.

Mounting

TX231RW Multi-sensor

• Mount in an open area clear for 50 feet in all directions.

• Mount with the solar panel facing south, so the wind direction is

correct. See N, S, E W, embossed on the top of the sensor.

• Use the bubble level on the top of the sensor to ensure it is level, for

accurate rainfall readings.

• The maximum wireless transmission range to the station is over 330

feet (100 meters) in open air, not including walls or trees.

• Cups should be on the top of the sensor.

• Attach to mounting surface with screws through the mounting bracket.

• The sensor can be mounted from the bottom or from the side.

Alternatively:

• Insert your own mounting pole into the sensor base.

• Tighten screws

• Mounting bracket would not be used.

Bubble

Level

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Ikke kategoriseret
Model:	TX231RW

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology TX231RW stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret La Crosse Technology Manualer

La Crosse Technology LTV-WSDTH04 Manual

23 September 2024

La Crosse Technology WT-137U Manual

13 September 2024

La Crosse Technology WT-2191A Manual

10 September 2024

La Crosse Technology V16 Manual

9 September 2024

La Crosse Technology V61-11 Manual

7 September 2024

La Crosse Technology WS-9410U Manual

31 August 2024

La Crosse Technology TX60U-IT-D Manual

31 August 2024

La Crosse Technology TX141V4 Manual

29 August 2024

La Crosse Technology 724-1409 Manual

28 August 2024

La Crosse Technology LTV-R1 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Life On Products LCAEA011 Manual

16 Juni 2025

Philips TAT2719 Manual

16 Juni 2025

Life On Products LCAF001 Manual

16 Juni 2025

Playtive IAN 303900 Manual

16 Juni 2025

Planet Audio PC35B Manual

16 Juni 2025

Philips SCF205 Manual

16 Juni 2025

Enrock Marine EMC56W Manual

16 Juni 2025

Playtive IAN 115579 Manual

16 Juni 2025

Playtive IAN 425617 Manual

16 Juni 2025

Life On Products LCAF017 Manual

16 Juni 2025