La Crosse Technology TX233TH Manual


Læs gratis den danske manual til La Crosse Technology TX233TH (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om La Crosse Technology TX233TH, eller vil du spørge andre brugere om produktet?

Side 1/3
Model: TX233TH
DC: 111116
Thermo-hygro sensor
Features
• Temperature
• Humidity
• Low Battery Indicator
• Fahrenheit | Celsius Display
AA
AA
F/C for
Sensor
TX button
(Transmission
LED
TX °C/°F
TX °C/°F
Fahrenheit | Celsius
Low Battery Indicator
Sensor Transmission
Power
• Requires 2-AA batteries for operation.
Mounting
• Transmits Temperature | Humidity every 58 seconds.
• Transmission icon and red LED light will ash when transmission occurs.
• Temperature and humidity will alternate on sensor display every 5 seconds.
Temperature | Humidity
Option 1:
• Install one mounting screw into a wall.
• Place the transmitter onto the screw.
Option 2:
• Insert the mounting screw through the front of the sensor and into the wall.
• Tighten the screw to snug (do not over tighten).
• Mount the temperature/humidity sensor on a north-facing wall or in any well shaded
location. Sun will make it read high.
• Under an eave or deck rail is preferred.
• Be sure the outdoor sensor is mounted vertically to drain moisture.
• The maximum wireless transmission range to the weather station is over 330 feet
(100 meters) in open air, not including walls or oors.
Sensor ID Number
• Each sensor has a unique ID number on a sticker inside the battery compartment.
• See instructions with the weather station for viewing the ID number on the station or
to replace an existing sensor.


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Ikke kategoriseret
Model: TX233TH

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology TX233TH stil et spørgsmål nedenfor, og andre brugere vil svare dig